• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.2
• /
• pp.174-181
• /
• 2023

Volatile flavor compounds of optimal Maillard reactions (MR) derived with the addition of precursors (AP), control (without AP) and raw as anchovy Engraulis japonicus sauce residue were identified and comparatively analyzed using solid phase microextraction/gas chromatography/mass spectrometry (SPME/GC/MS). MR was produced by adding 1% (w/w) glucose and mixed amino acids (threonine 0.543%, glutamic acid 0.194%, glycine 0.382%, w/w) to raw (100 g of anchovy sauce residue and 100 mL of distilled water), and heating at 110 ℃ for 2 h. Among 65 flavor components detected, 7 compounds were produced through Maillard reaction to change in content. A total of 7 volatile flavor compounds, including 2-methylbutanal, 3-methylbutanal, dimethyl disulfide, methylpyrazine, dimethyl trisulfide, methional, and 2-furanmethanol, tended to increase in the order of raw, control, and MR, but methylpyrazine was not detected in control. Amounts of 2-methylbutanal, 3-methylbutanal, dimethyl disulfide, methylpyrazine, dimethyl trisulfide, methional, and 2-furanmethanol having positive odors (dark chocolate-, garlic-, hazelnut-, cooked potato-like) were 11.04, 50.15, 3.25, 8.38, 4.60, 9.59, and 3.08 times higher, respectively, in MR than those in raw.

• Journal of Environmental Science International
• /
• v.13 no.10
• /
• pp.903-909
• /
• 2004

A new method based on solid phase microextraction(SPME), coupled with GC/FID, has been developed for the determination of PCE and TCE in water samples. The experimental parameters affecting the SPME process (i.e, kinds of fibers, extraction time, desorption time, extraction temperature, volume ratio of sample to headspace, salt addition, and magnetic stirring) were optimized. The coefficients of determination ($R^2$) for PCE and TCE were 0.9951 and 0.9831, respectively when analytes concentration ranges from 10 to 300$\mu$g/L. The relative standard deviations were 3.4 and $2.1\%$ for concentration of 10$\mu$g/L(n=5), respectively. The detection limits of PCE and TCE were 0.5 and l.3$\mu$g/L, respectively.

• Journal of Korean Society on Water Environment
• /
• v.26 no.4
• /
• pp.622-628
• /
• 2010

In this study, Solid-phase microextraction (SPME) with GC/FID was studied as a possible alternative to liquid-liquid extraction for the analysis of BTEX and MTBE. Experimental parameters affecting the SPME process (such as kind of fibers, adsorption time, desorption time, volume ratio of sample to headspace, salt addition, and magnetic stirring) were optimized. Experimental parameters such as CAR/PDMS, adsorption time of 20 min, desorption time of 5 min at $250^{\circ}C$, headspace volume of 50 mL, sodium chloride (NaCl) concentration of 25% combined with magnetic stirring were selected in optimal experimental conditions for analysis of BTEX and MTBE. The general affinity of analytes to CAR/PDMS fiber was high in the order p-Xylene>Toluene>Ethylbenzene>MTBE>Benzene. The linearity of $R^2$ for BTEX and MTBE was from 0.970 to 0.999 when analyte concentration ranges from $30{\mu}g/L$ to $500{\mu}g/L$, respectively. The relative standard deviation (% RSD) were from 2.5% to 3.2% for concentration of $100{\mu}g/L$ (n=5), respectively. Finally, the limited of detection (LOD) observed in our study for BTEX and MTBE were from $7.5{\mu}g/L$ to $15{\mu}g/L$, respectively.

• Analytical Science and Technology
• /
• v.14 no.1
• /
• pp.44-49
• /
• 2001

Solid-phase microextraction (SPME) with $85{\mu}m$ polyacrylate fiber, coupled to gas chromatography-mass spectrometry was used to analyze the plasticizers contained in balloon samples. The balloons were identified to be made of polyisoprene by IR spectroscopy. The plasticizers extracted from the balloon samples soaked in acetone-added water solvent for an hour were quantified by external standard method using nine kinds of plasticizers. The quantification method was validated for standard plasticizers in the range of $0.25-25{\mu}g/g$. The detection limits were $0.11-0.38{\mu}g/g$ for different plasticizers. The RSDs for the reproducibility of this quantitation method were 3.7-14.2%. A few of balloons included risky level of plasticizer concerned as and endocrine disrupter, and it is necessary to regulate these products.

• Journal of Life Science
• /
• v.16 no.7 s.80
• /
• pp.1243-1249
• /
• 2006

Volatile flavor compounds in commercial crab-like flavorants were compared by mean of solid phase microextraction(SPME) and liquid continuous extraction (LLCE)/GC/MSD methods. A total of 86 volatile flavor compounds were detected. Of these, 71 were positively identified consisting mainly of sulfur-containing compounds (13), aldehydes (3), ketones (2), esters (26), alcohols (5), aromatic compounds (3), terpenes (8), acids (2) and miscellaneous compounds (9). SPME method was more effective than LLCE method in detection of volatile components in commercial crab-like flavorants. Eight S-, N-containing compounds such as dimethyl sulfide, dimethyl disulfide, dipropyl disulfide, 3-(methylthio)propyl acetate, 3-(methylthio) propanal, 3-(methylthio) propanol, 2-methyl-3-(methylthio) pyrazine and 2-methyl-5-(methylthio) pyrazine, 8 esters such as styrallyl acetate, ethyl acetate, isoamyl acetate, benzyl acetate, ethyl pentanoate, butyl pentanoate, isoamyl pentanoate and furfuryl acetate were considered as major components in crab-like flavorants.

• Analytical Science and Technology
• /
• v.20 no.5
• /
• pp.370-382
• /
• 2007

In this study, solid-phase microextraction (SPME) technique using GC/FID was studied as a possible alternative to liquid-liquid extraction for the analysis of EGBE, DGBE, DBM and TGME in water, and an optimization condition of trace analysis of EGBE, DGBE, DBM and TGME using the factorial design was described. Experiments used a fractional factorial design method followed by central composite design allowing optimization of a number of factors as well as statical analysis of results. The response surface analysis showed that the extraction efficiency can be described by a second-order polynomial equation in which the salts concentration, extraction temperature, extraction time and sonication time are the major influences. Using DOE, a new data-dependent method was developed that improved the quantity of confidently analyzed EGBE, DGBE, DBM and TGME in water samples.

• Proceedings of the Korean Society of Food Hygiene and Safety Conference
• /
• 2001.10a
• /
• pp.171-174
• /
• 2001

Solid phase micro-extraction (SPME), a solvent-free, rapid and inexpensive method for the extraction of organic compounds from aqueous sample matrices, was evaluated for determination of the 120 pesticides in vegetables such as crown daisy, perilla leaf, leafy lettuce and to mato. The analysis conditions were chosen for the SPME method: 15 min of immersion of the PDMS fiber in 10 ml of the solution with stirring at 1,000 rpm. The recovery tests were carried out in triplicate. The range of recoveries was 0-142% for organochlorine pesticides and $4.9\sim200\%$ for organophosphorus pesticides. The recoveries were very low in the pesticide groups with low solubility in water. The recoveries became lower in proportion to the interference materials in vegetables. The recovery in tomato was relatively higher than that in perilla Ie af and crown daisy. The recovery values obtained by SPE and SPME were compared. In leaf y lettuce, recovery obtained by SPE method ranged from $58.1\%\;to\;136.1\%$ and recovery by SPME ranged from $9.6\%\;to\;176.3\%$ In organophosphorus pesticides. The recovery in SPME method was satisfactory with $136\%$ for ethoprophos, $119\%$ for methidathion and $113\%$ for diazinon. Meanwhile, recovery of EPN, phenthoate and 2,4-DDT revealed relatively low value of $38\%,\;41\%\;and\;3.4\%,$ respectively. However, most of pesticides applied to SPME method sho wed constant recovery and precision. From these results, it can be concluded that solid phase micro-extraction might be an appropriate method for the screening test of pesticides in vegetables.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.1
• /
• pp.27-35
• /
• 2014

The headspace solid-phase microextraction (HS-SPME) followed by gas chromatography/mass spectrometry procedure has been developed for the simultaneous determination of petroleum aromatic hydrocarbons such as benzene, toluene, ethylbenzene and xylene isomers (BTEX) and polycyclic aromatic hydrocarbons (PAHs) in seawater. The advantages of SPME compared to traditional methods of sample preparation are ease of operation, reuse of fiber, portable system, minimal contamination and loss of the sample during transport and storage. SPME fiber, extraction time, temperature, stirring speed, and GC desorption time were key extraction parameters considered in this study. Among three kinds of SPME fibers, i.e., PDMS ($100{\mu}m$), CAR/PDMS ($75{\mu}m$), and PDMS/DVB ($65{\mu}m$), a $65{\mu}m$ PDMS/DVB fiber showed the most optimal extraction efficiencies covering molecular weight ranging from 78 to 202. Other extraction parameters were set up using $65{\mu}m$ PDMS/DVB. The final optimized extraction conditions were extraction time (60 min), extraction temperature (50), stirring speed (750 rpm) and GC desorption time (3 min). When applied to artificially contaminated seawater like water accommodated fraction, our optimized HS-SPME-GC/MS showed comparable performances with other conventional method. The proposed protocol can be an attractive alternative to analysis of BTEX and PAHs in seawater.

• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1648-1655
• /
• 2010

The flavor extracts of Mideoduck muscle and its juices were concentrated by simultaneous distillation and extraction (SDE) and solid-phase microextraction (SPME) methods. Each component present in the extracts was identified with GC and GC-MS by the n-paraffin hydrocarbon retention index and standard MS library data system. By SDE, $371.3\;{\mu}g/g$ of hexanal, $80.1\;{\mu}g/g$ of 1-tridecanol, $72.1\;{\mu}g/g$ of (Z)-4,5-dimethylhex-2-en-4-ol with other alcohols, aldehydes and acids were present in the flavor extracts, with the alcohols having the highest composition and being the most important factor in Mideoduck muscle flavor. By SPME, 9 alcohols, 1 acid, 1 aldehyde, 1 hydrocarbon, 1 ester, 1 amine and 2 ketones were detected in the extracts, with alcohol such as 1-nonanol, 1-decanol and 1-tridecanol as the major components. In SPME, the muscle sample, consisting of $31.6\;{\mu}g/g$ of 1-nonanol, $20.3\;{\mu}g/g$ of (E)-2-butenedioic acid dibutylester, and $26.7\;{\mu}g/g$ of heptadecanoic acid made up the 62.1% of total flavor extracts of Mideoduck muscle. The results of the SPME methods were similar to the composition of the raw material flavor of the sample even at a low concentration.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.3
• /
• pp.357-366
• /
• 2008

In this study, the analytical performance of trimethylamine (TMA) were investigated with respect to headspace-solid phase microextraction (HS-SPME) method. In order to induce the elution of aqueous TMA to headspace, NaOH was added as a decomposition reagent to aqueous TMA standard. By controlling the combination of three major variables for TMA extraction, the extent of extraction was compared between the two contrasting conditions for each variable (i.e., reaction time (long (L) vs short (S)), exposure temperature (30 vs $50^{\circ}C$), and exposure time (10 vs 30 min)). The results of this comparative analysis showed that the extraction efficiency for all eight types of HS-SPME combinations decreased on the order: L-30-30>L-50-10>L-30-10>L-50-30>S-30-30>S-50-30>S-50-10>S-30-10. The effect of reaction time appeared to exert significant influences on the relative recovery rate of HS-SPME at 90% confidence level. However, the effects of exposure temperature or exposure time were not so significant as reaction time. When the recovery rate of HS-SPME is compared against the direct injection of liquid standard into GC injector, it recorded as 2%. According to this comparative study, the reaction conditions for HS-SPME application can exert significant influences on the analysis of TMA.