• Journal of the Korea Society of Computer and Information
• /
• v.25 no.2
• /
• pp.105-111
• /
• 2020

In this paper, we propose a scheme that minimizes the energy imbalance problem of solar-powered wireless sensor network (SP-WSN) using both a mobile sink capable of wireless power transfer and an efficient clustering scheme (including cluster head election). The proposed scheme charges the cluster head using wireless power transfer from a mobile sink and mitigates the energy hotspot of the nodes nearby the head. SP-WSNs can continuously harvest energy, alleviating the energy constraints of battery-based WSN. However, if a fixed sink is used, the energy imbalance problem, which is energy consumption rate of nodes located near the sink is relatively increased, cannot be solved. Thus, recent research approaches the energy imbalance problem by using a mobile sink in SP-WSN. Meanwhile, with the development of wireless power transmission technology, a mobile sink may play a role of energy charging through wireless power transmission as well as data gathering in a WSN. Simulation results demonstrate that increase the amount of collected data by the sink using the proposed scheme.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.4
• /
• pp.83-88
• /
• 2020

In Solar-powered wireless sensor networks(SP-WSN), the battery is periodically charged, so the best use of harvested energy is more important, rather than minimizing energy consumption. Meanwhile, as is well known, the reliability of communication between sensor nodes is very limited due to the resource-constraint of sensor nodes. In this paper, we propose an advanced FEC (forward error correction) scheme which can give SP-WSN more reliability for communication. Firstly, the proposed scheme uses energy modeling to calculate the amount of surplus energy which can be utilized for extra operations, and then determines the number of additional parity bits according to this amount of surplus energy. At the same time, link quality modeling calculates the optimal parity bits for error recovery in the current data communication environment. Finally, by considering these two parity sizes, it is possible to determine the optimal parity size that can maximize the data reliability without affecting the node black out. Performance verification was performed by comparing the amount of data collected at the sink and the number of outage nodes with other schemes.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.368-369
• /
• 2019

태양 에너지 기반 무선 센서 네트워크(SP-WSN) 환경에서는 주기적으로 배터리가 충전되므로 에너지 소모를 최소화하기 보다는 수집된 에너지의 효율적인 사용이 중요하다. 한편, 잘 알려진 것처럼 SP-WSN을 포함하여 모든 센서 네트워크들은 사용되는 센서 노드의 특성상 성능이 제한적이므로 노드 간의 통신 신뢰도가 낮을 수밖에 없다. 본 논문에서는 위의 특성들을 고려하여 SP-WSN에서 신뢰성있는 통신을 할 수 있는 향상된 순방향 에러정정 기법(FEC) 기법을 제안한다. 싱크에서 수집되는 데이터양과 정전되는 노드 수를 다른 기법들과 비교함으로써 제안 기법의 성능 검증을 수행하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.146-146
• /
• 1999

BN은 천연에는 존재하지 않는 인공재료로서 특히 섬아연광형 질화붕소인 c-BN은 다이아몬드 다음가는 고경도, 높은 열전도도를 가지고 있을 뿐만 아니라 다이아몬드와는 달리 철계금속에 대해 화학적으로 매우 안정하기 때문에 다이아몬드의 응용이 매우 제한되고 있는 철강제품의 가공공구, 내마모 코팅재료로서 주목받고 있는 차세대 박막재료이다. 최근 c-BN박막 합성에 관한 많은 연구결과들이 보고되었는데 대부분의 연구자들이 성장하는 박막 표면에 입사되는 이온 에너지 및 유량이 c-BN 합성에 중요한 인자이며, 합성된 박막은 sp2결합층(h-BN)과 sp3결합층(c-BN)이 혼합되어 있음을 알 수 있다. 그러나 기존의 이온빔보조 합성법(IBAD) 공정에서는 입사빔과 증착물질이 공간적, 시간적으로 일치되는 경우에만 입사빔의 운동에너지가 증착공정에 기여하기 때문에 입사빔의 정밀한 에너지 조절이 어렵게 된다. 그러나 음이온 빔 직접 증착법에서는 입사이온빔 자신이 운동에너지를 운반하기 때문에 에너지 조절이 정밀할 뿐만 아니라 이를 통해 BN 박막의 상 및 성장거동을 조절할 수 있게 된다. 본 연구에서는 음이온 직접 증착법을 이용하여 c-BN박막을 합성하고 이의 초기성장층의 성장거동을 조사하였다. 증착시 음이온 빔의 에너지가 Bn 박막의 결정성에 미치는 영향을 알아보기 위하여 100~500eV의 보론 음이온빔을 조사하였으며 질소원으로는 낮은 낮은 에너지 범위의 질소이온을 동시에 공급하였다. FRIR 분석결과, 보론 이온의 에너지가 증가하면 cubic 상의 분율이 증가하였으며 증착된 박막은 15nm 두께의 sp2결합층이 먼저 성장한후 sp3결합층으로의 상전이가 일어났다. 질소이온빔의 에너지는 100eV 일 때 최대 cubic 함량과 두께를 보였으며 그 이상의 에너지에서는 c-BN 박막을 sputter시켰다. AFM 관찰결과, h-Bn층은 날카롭고 방향성을 가진 침상이었으며 c-BN 층은 atomically smooth 한 표면을 관찰할 수 있었다.

• Journal of the Korean Institute of Gas
• /
• v.18 no.1
• /
• pp.61-67
• /
• 2014

Small punch(SP) tests were performed on high strength Dual Phase(DP) steels in order to evaluate the behavior of hydrogen embrittlement. For this purpose, three different kinds of DP steel specimens were charged with hydrogen by electochemical hydrogen charging experiment. After charging with hydrogen, the amount of charged hydrogen was measured. The measurement results showed that amounts of charged hydrogen were largely dependent on the martensite volume fraction of DP steel. The hydrogen charging time of 25 hrs with current densities of 150 and $200mA/cm^2$ was investigated as saturation condition with hydrogen. The analysis results on the SP energy and height of SP bulbs after SP tests showed that those were decreased as the amount of charged hydrogen increased. Fractographs of SP bulbs were observed a brittle fracture mixed with quasi-cleavage fractures, layered structures and clear facets.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.59-64
• /
• 2022

Effects of film stack structure and peeling rate on the peel strength of screen-printed (SP) Ag/polyimide (PI) systems were investigated by a 90° peel test. When PI film was peeled at PI/SP-Ag and PI/SP-Ag/electroplated (EP) Cu structures, the peel strength was nearly constant regardless of the peeling rate. When EP Cu was peeled at EP Cu/SP-Ag/PI structure, the peel strength continuously increased as peeling rate increased. Considering uniaxial tensile test results of EP Cu/SP-Ag film with respect to loading rate, the increase of 90° plastic bending energy and peel strength was attributed to increased flow stress and toughness. On the other hand, viscoelastic PI film showed little variation of flow stress and toughness with respect to loading rate, which was assumed to result in nearly constant 90° plastic bending energy and peel strength.

• Journal of Soil and Groundwater Environment
• /
• v.26 no.6
• /
• pp.1-17
• /
• 2021

Self-potential (SP) surveys measure naturally occurring differences in electrical potential in the absence of artificial sources and have been applied to various fields since the first application in mineral explorations. Among various causes of SP occurrences, streaming potential is generated by the flow of groundwater, and makes SP surveys suitable for the exploration of groundwater table fluctuation, fractures, sinkholes and landslide occurrences. Recently, there has been many studies that applied SP surveys to monitor water leakage through dikes and embankments. In this review paper, we first review the characteristics and theoretical backgrounds of streaming potential in saturated or unsaturated porous media to introduce it in the embankment among various application field. After the review of the background theory, we review the past cases of field SP surveys on dikes and embankments and also the characteristics of field streaming potential data in the surveys. Further, by analyzing past studies of qualitative as well as quantitative interpretation of SP survey data, we show the possibility of quantitative interpretation of streaming potential data obtained on dikes and embankments. Consequently, it is hope that this review paper helps researches on SP surveys on dikes and embankments, and provides basis for interpretation methods of the SP data to identify leaked area and further leakage rate (or permeability).

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.2
• /
• pp.130-137
• /
• 2011

To improve sediment quality in eutrophic coastal areas using benthic microalgae, we examined the effects of temperature and salinity on the growth of benthic microalgae Achnanthes sp., Amphora sp., Navicula sp. and Nitzschia sp. isolated from Sujeong Bay, Korea, using batch cultures. The maximum growth rates were obtained under the combined temperature and salinity conditions of $25^{\circ}C$ and 25 psu for Achnanthes sp. (0.60 /day), $15^{\circ}C$ and 25 psu for Amphora sp. (0.56 /day), $20^{\circ}C$ and 30 psu for Navicula sp. (0.53 /day), $20^{\circ}C$ and 25 psu for Nitzschia sp. (0.48 /day). Considering these results of temperature and salinity conditions required for optimum growth (${\geq}$ 70% of maximum specific growth rate), Amphora sp. Navicula sp. and Nitzschia sp. were characterized as eurythermal and euryhaline species, while Achnanthes sp., which exhibited extremely low survival at low temperature. In conclusion, Amphora sp., Navicula sp. and Nitzschia sp. may be useful species for phytoremediation, to control eutrophication and hypoxic water and thus improve environmental conditions of polluted coastal areas.

• Journal of Marine Bioscience and Biotechnology
• /
• v.11 no.1
• /
• pp.23-28
• /
• 2019

For successful microalgal biodiesel production, the strain should be selected carefully. Fast growth rate and high fatty acid contents are desired traits for algal biodiesel production. In ocean cultivation of microalgae, seawater temperature slowly changes over seasons, and rotating algal strains in accordance with their optimal temperature could improve overall productivity. Additionally, use of indigenous strain is preferred to alleviate potential impacts on the environment. In this study, five strains of Tetraselmis sp. from nearshore of Youngheung Island, Incheon, Korea, were isolated during winter and characterized for their growth patterns and fatty acid compositions in the low temperatures ($5-15^{\circ}C$). The five strains showed various characteristics in optimal growth temperature, fatty acid contents, and compositions. Compared with a strain of Tetraselmis sp., isolated from Ganghwa island in a previous study, a rapid-growing strain with 237% higher biomass productivity and an oleaginous strain with twice higher fatty acid contents at $10^{\circ}C$ were isolated. The oleaginous Tetraselmis strain showed the highest fatty acid productivity among the strains, having 438% higher productivity than the previous strain. Using the new isolates in the seasons with low seawater temperature would improve microalgal fatty acid productivity in ocean cultivation.

• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.40-46
• /
• 2014

The hydrogen embrittlement degree of 5 type high strength DP steel charged with hydrogen by electrochemical method was evaluated by small punch test(SP test). After SP test, SP absorbed energy was remarkably decreased from 363 kgf-mm to 209 kgf-mm with increasing hydrogen charging time from 5hr to 50hr at DP5 specimen under the $200mA/cm^2$ current density condition. It was investigated that the decrease of hydrogen charging amount and SP absorbed energy according to the increase of current density and hydrogen charging time had a linear relationship. And it also investigated that the change of bulb height appeared by the SP test was decreased from 1.79mm to 1.59mm with the hydrogen charging conditions. It was supposed that it could be used as indicator of the evaluation of hydrogen embrittlement because of the similar trend of the formal results of SP absorbed energy. From the SEM observation of fracture area by crack in bulb, the morphology of fracture surface according to increasement of the hydrogen charging amount was varied with the cleavage mode.