• 한국초지조사료학회지
• /
• 제25권2호
• /
• pp.119-124
• /
• 2005

본 시험은 제주지역에서 한지형 잔디의 적정 질소 분시 횟수를 구명하기 위하여 2004년 3월 26일부터 7월 8일까지 질소시비량을 20kg/10a로 고정하고, 15일 간격으로 1회에서 5회까지 분시하여 잔디의 식생변화를 조사하였다. 초장은 4~5회 분시에서 각각 21.8cm, 21.9cm로 가장 길었으나, 시비횟수가 적어짐에 따라 초장은 참아졌다. 근장과 엽록소는 초장반응과 비슷한 경향이었다. 질소 시비횟수가 1회에서 5회로 증가함에 따라 엽중은 1,091kg에서 1,485kg/10a로, 근중은 2,236kg에서 2,808kg/110a로 증가되었다. 질소분시 횟수가 1회에서 5회로증가함에 따라 잔디의 피도는 $96.0\%$에서 $98.4\%$로 증가되었으나, 잡초는 $4.0\%$에서 $1.6\%$로 감소되었다. 잔디의 밀도는 $97.4\%$에서 $98.9\%$로 증가되고 있는 반면, 잡초의 밀도는 $2.6\%$에서 $1.1\%$로 감소되는 경향이었다. 질소분시 횟수가 전량 시비구에서 5회로 증가됨에 따라 침입잡초는 15.7종에서 11.8종으로 감소되었다. 잡초의 우점순위는 전량 시비구에서 쇠비름, 여뀌, 별꽃 순위였으며, 2회 분시에서 쇠비름, 여뀌, 바랭이 순위로, 3회 분시에서 바랭이, 쇠비름, 여뀌 순위로, 4회와 5회 분시에서 쇠비름, 새포아풀, 여뀌 순위였다. 이상의 결과를 종합해 볼 때, 제주지역에서 질소비료를 4회 분시하는 것이 효과적일 것으로 판단된다.

• 한국환경과학회지
• /
• 제22권6호
• /
• pp.745-759
• /
• 2013

The characteristics of meteorological conditions and air pollution were investigated in a valley city (Yangsan) on bad visibility days (from 05:00 to 09:00 LST) of the cold half year (November 2008 to April 2009). This analysis was performed using the hourly observed data of meteorological variables (temperature, wind speed and direction, relative humidity, and 2 m and 10 m temperature) and air pollutants ($NO_2$, $SO_2$, $PM_{10}$, and $O_3$). In addition, visibility data based on visual measurements and a visibility meter were used. The bad visibility days were classified into four types: fog, mist, haze, and the mixture (mist+haze). The results showed that the bad visibility days of the four types in the valley city were observed to be more frequently (about 50% of the total study period (99 days except for missing data)) than (27%) those near coastal metropolitan city (Busan). The misty days (39%) in the valley city were the most dominant followed by the hazy (37%), mixture (14%), and foggy days (10%). The visibility degradation on the misty days in Yangsan was closely related to the combined effect of high-level relative humidity due to the accumulation of water vapor from various sources (e.g. river, stream, and vegetation) and strong inversion due to the development of surface radiative cooling within the valley. On the hazy days, the visibility was mainly reduced by the increase in air pollutant (except for $O_3$) concentrations from the dense emission sources under local conditions of weaker winds from the day before and stronger inversion than the misty days. The concentrations of $NO_2$, $PM_{10}$, and $SO_2$ (up to +36 ppb, $+25{\mu}g/m^3$, and +7 ppb) on the hazy days were a factor of 1.4-2.3 higher than those (+25 ppb, $+14{\mu}g/m^3$, and +3 ppb) on the misty days.

• 한국세라믹학회지
• /
• 제56권2호
• /
• pp.178-183
• /
• 2019

A process of fabricating the foamed glass that has closed pores with 8 ~ 580 ㎛ sizes without a blowing agent by sintering 10 ㎛ boron-free glass powder composed of CaO, MgO, SO₃, Al₂O₃-83 wt% SiO₂ at a molding pressure of 0 ~ 120 MPa and a sintering temperature of 750 ~ 1000℃ was investigated. To analyze the glass transition temperature of glass powder, thermogravimetric analysis-differential thermal analysis (TGA-DTA) method were used. The microstructure and pore size of foamed glass were examined using the optical microscopy and field emission scanning electron microscopy (FE-SEM). For the thermal diffusivity and color of the fabricated samples, a heat flow meter and ultraviolet-visible-near-infrared (UV-VIS-NIR)-colormetry were used, respectively. In the TGA-DTA result, the glass transition temperature of glass powder was confirmed to be 626℃. In the microstructure result, closed pores of 7 ~ 20 ㎛ were formed at 750 ~ 900℃, and they were not affected by the molding pressure and sintering temperature. However, at 1,000℃, when there was 0 MPa molding pressure, closed pores of 580 ㎛ were confirmed, and the pore size decreased as the molding pressure increased. Moreover, at a molding pressure of 30 MPa or higher, closed pores of approximately 400 ㎛ were formed. The porosity showed an increasing trend of smaller molding pressure and larger sintering temperature, and it was controllable in the range of 5.69 ~ 68.45%. In the thermal diffusivity result, there was no change according to the molding pressure, and, by increasing the sintering temperature, up to 0.115 W/m·K could be obtained. The Lab color index (CIE-Lab) results all showed a similar translucent white color regardless of molding pressure and sintering temperature. Therefore, based on the foamed glass without boron and blowing agent, it was confirmed that white foamed glass, which has closed pores of 8 ~ 580 ㎛ and a thermal diffusivity characteristic of 0.115 W/m·K, can be fabricated by changing the molding pressure and sintering temperature.

• 한국방사선학회논문지
• /
• 제6권2호
• /
• pp.137-142
• /
• 2012

본 연구는 구강 내 방사선 촬영 시 동일조건 하에서 촬영장비의 기종을 다르게 한 경우와 동일 기종에서 노출조건을 일정하게 하였을 경우 획득되는 방사선의 선량변화를 알아보고자 하였다. 장비의 기종에 따른 변화를 알아보기 위해 3대의 각기 다른 촬영 장치를 이용하여 상악 전치부, 소구치부, 대구치부의 3가지의 촬영조건을 이용하여 선량을 측정하였고 장치의 재현성 검사를 위해서 각 장치에 동일한 조건으로 3회 조사하여 선량변화를 알아보았다. 선량의 측정은 반도체 측정기를 사용하였으며, 필름의 농도값을 획득하여 진단에 유효적인 범위에 만족하는지 분석해 보았다. 같은 촬영기를 사용하여 실험한 결과 각 부위별로 선량의 차이는 최대값과 최소값이 적게는 3배 많게는 10배의 선량 차이를 보였다. 흑화도의 범위 또한 적절한 범위인 0.25~2.0를 초과한 2.10~2.95의 허용범위를 보였다. 동일한 촬영기로 특정 부위를 같은 조건에서 촬영하더라도 측정된 선량값은 큰 차이를 보였으며 필름의 농도 분석의 결과 적합한 농도 분포를 보이지 않았던 것으로 나타났다. 이는 환자의 재촬영을 발생시킬 수 있으며 진단시 오류를 일으킬 수 있어 환자의 피폭에 직 간접적인 피해를 일으킬 수 있다. 따라서 치과 방사선 촬영장치 또한 정기점검이 필요할 것으로 생각되며 표준화된 촬영조건과 현상조건이 제공되어야 한다고 사료된다.

• 성인간호학회지
• /
• 제13권2호
• /
• pp.209-222
• /
• 2001

The environment in the ICU leads to negative changes in a patient's usual sleep pattern and so contributes negatively to the patient's health condition as compared to patients in general wards. Therefore, it is thought that an important nursing intervention would be to identify the relation between noise and sleep patterns which play an important role in illness recovery. The purpose of the present study was to explore the relationship between noise in the ICU and the sleep pattern of patients admitted to the ICU. A descriptive correlation design was used to examine the relationship. Thirty-four subjects were recruited from a Medical ICU (MICU), Surgical ICU (SICU) and Coronary Care Unit (CCU) at a large university hospital in Suwon. Data were collected from September 28 to October 31 in 1999. In the present study, noise was categorized into noise level and patients' perception of noise. The objective noise level was measured using the A-Weighted Sound Level Meter. The patients' preception of noise was measured using a self-reported questionnaire developed by the researcher. Sleep patterns in this study includes both quantity and quality of sleep. These were measured using open ended questionnaires and the 'Korean Sleep Scale A' developed by Oh, Song, Kim(1998). The data was analyzed using the SPSS-WIN to test the research question, Pearson product moment correlation coefficient was run. Ancillary analysis were conducted with demographic variables to determine their relation to the main study variables. For the ancillary analysis, t-test and one-way ANOVAs were performed. The results of the present study are summerized as follows : 1. The total mean of objective noise level (10pm-6am) was 56.2dB. The means for night time noise level in individual ICUs for the SICU, MICU and CCU, were 58.7dB, 58.6dB and 48.3dB, respectively. The total mean for patients' noise perception was 42.8 out of a maximum possible score of 76. For item means of noise perception, the one ranked highest was "conversations between doctors and nurses" (3.2). The one ranked lowest was "noise from the radio" (1.2). Regarding the degree of perception for each type of noise source, the one ranked highest was "equipment noise" (2.6), the second was "conversation between medical staff" (2.4), the third was "conversation between patients, caregivers and visitors" (2.3), and the one ranked lowest was "environment noise" (1.8). 2. Looking at quantity of sleep of ICU patients, the mean nocturnal sleep time was found to be 4.9 hours. The total mean of sleep quality for ICU patients was 21.0 out of a maximum possible score of 40. 3. The relationship between perception of noise and quantity of sleep was statistically significant(r= - .41, p<.05). The relationship between perception of noise and quality of sleep was also statistically significant(r= - .47, p<.01). The results of the study indicate that personal perception of noise is related to sleep patterns. Therefore, it is suggested that nursing interventions be developed to reduce the degree of personal perception of noise and, thus, decrease sleep pattern disturbances in patients in the ICU.

• Journal of Korean Neurosurgical Society
• /
• 제53권5호
• /
• pp.288-292
• /
• 2013

Objective : Vertebral distraction is routinely performed during anterior cervical discectomy and fusion (ACDF). Overdistraction can injure the facet joints and may cause postoperative neck pain consequently. The purpose of this study was to investigate the clinical relevance of distraction force during ACDF. Methods : This study included 24 consecutive patients with single level cervical disc disease undergoing single level ACDF. We measure the maximum torque just before the the arm of the Caspar retractor was suspended by the rachet mechanism by turning the lever on the movable arm using a torque meter. In order to turn the lever using the torque driver, we made a linear groove on the top of the lever. We compared the neck disability index (NDI) and visual analogue scale (VAS) scores between the high torque group (distraction force>6 $kgf{\cdot}cm$) and the low torque group (distraction force${\leq}6kgf{\cdot}cm$) at routine postoperative intervals of 1, 3, 5 days and 1, 3, 6 months. Results : The VAS scores for posterior neck pain had a linear correlation with torque at postoperative 1st and 3rd days ($y=0.99{\times}-1.1$, $r^2=0.82$; $y=0.77{\times}-0.63$, $r^2=0.73$, respectively). VAS scores for posterior neck pain were lower in the low torque group than in the high torque group on both 1 and 3 days postoperatively ($3.1{\pm}1.3$, $2.6{\pm}1.0$ compared with $6.0{\pm}0.6$, $4.9{\pm}0.8$, p<0.01). However, the difference in NDI scores was not statistically significant in all postoperative periods. Conclusion : Vertebral distraction may cause posterior neck pain in the immediate postoperative days. We recommend not to distract the intervertebral disc space excessively with a force of more than 6.0 $kgf{\cdot}cm$.

• 한국식품영양과학회지
• /
• 제34권10호
• /
• pp.1491-1497
• /
• 2005

본 연구에서는 기능성이 강화된 유색보리 계통을 선발하고 유색보리 계통 육성 및 활용에 기초자료로 사용하기 위해 유색보리 40계통과 대조군인 춘추쌀보리, 겉보리를 $0.1\%$ TFA를 용매로 사용하여 3회 반복 추출 후 감압 농축 후 anthocyanin 함량, 색도 및 항산화효과를 측정하였다. 유색보리의 anthocyanin 색소함량과 색도를 측정한 결과 계통별로 큰 차이를 보였고, 색의 짙음과 옅음으로 그룹 I ,그룹 II, 그룹 III을 나눌 수 있었다. 계통별로 항산화효과에서도 상당한 차이가 있었으나, 제놀함량이 높았던 유색보리 계통이 전자 공여능, SOD-like 활성, lecithin 산화 저해활성능, hydro-gen radical 소거능이 높음을 알 수 있었으며, 여러가지 항산화실험에서 항산화능이 높게 측정되었던 No. 25, 27, 34, 35, 38이 anthocyanin을 함량이 높은 그룹 I에 포함되어 있어 anthocyanin을 함량과 항산화효과는 정의 상관관계로 나타났다. 따라서, 다른 유색 함유 작물처럼 색깔이 진한 유색보리 품종이 개발되어 다양한 생리활성이 입증된다면 새로운 기능성 식품소재로 활용가능성이 높을 것으로 사료된다.

• Archives of Plastic Surgery
• /
• 제38권2호
• /
• pp.135-142
• /
• 2011

Purpose: Deficiencies of the abdominal wall can be the a result of infection, surgery, trauma, or primary herniation. For abdominal wall reconstruction, synthetic materials have been shown to provide a better long-term success rate than primary fascial repair. But, synthetic materials cannot elicit angiogenesis or produce growth factor and are therefore plagued by an inability to clear infection. As a result of the inherent drawbacks of synthetic, significant effort has been spent on the identification of new bioprosthetic materials. The aim of our study is to evaluate the effectiveness of a synthetic material (PROCEED$^{(R)}$) and an ADM ($SureDerm^{TM}$) to repair abdominal wall defects in a rabbit models. Methods: We measured the tensile strength of the $SureDerm^{TM}$ and PROCEED$^{(R)}$ by a Tension meter (Instron 4482). 16 Rabbit models were assigned to this study for abdominal wall reconstruction. Abdominal defect of 8 rabbits were reconstructed by PROCEED$^{(R)}$ and the rest were reconstructed by $SureDerm^{TM}$. We assessed gross and histologic examinations for the reconstructed abdominal wall. Results: The tensile strength of $SureDerm^{TM}$ and Gore Tex$^{(R)}$ is $14.64{\pm}0.51Mpa$, $8.54{\pm}0.45Mpa$. PROCEED$^{(R)}$ was estimated above the limits of measurement. Inflammatory reaction of PROCEED$^{(R)}$ persisted for 32weeks, but $SureDerm^{TM}$ decreased after 16weeks. Vascular ingrowth into the $SureDerm^{TM}$ was seen after 32 weeks. The basement membrane of $SureDerm^{TM}$ changed into a form of pseudoperitoneum. In PROCEED$^{(R)}$, it seemed like pseudoepithelial lining was made from the fibrosis around the mesh. Conclusion: In our study, the $SureDerm^{TM}$ not only have less inflammatory reaction and presented more angiogenesis than the PROCEED$^{(R)}$, but also have pseudoperitoneum formation. It is expected that $SureDerm^{TM}$ is useful for abdominal wall reconstruction. However, a long-term study of its usage consequences are thought to be needed.

• 한국자원식물학회지
• /
• 제18권1호
• /
• pp.123-130
• /
• 2005

인삼포장에서 염류의 집적은 우량인삼의 생산에 많은 장애요인이 되고 있다. 본 연구는 인삼종자의 NaCl에 대한 반응정도를 조사하고, 또한 체세포배의 발생시 및 인삼모상근에서 사포닌의 생성에 미치는 반응을 조사하였다. 인삼 접합자 배를NaCl이 첨가되지 않은 배지에 접종한 결과 $84.5\%$가 발아되었으며 0.1M에서는 $3\%$ 만이 발아되었고, 0.2M이상의 처리구에서는 전혀 발아가 되지 않았다. 또한 체세포배 발생 은 미숙배를 이용할 경우 NaCl 무첨가배지에서 가장 양호하였으며 농도가 증가할수록 감소하는 경향을 보였다. 반면에 성숙배에서 는 NaCl 무첨가배지보다 0.05M첨가배지에서 더 양호한 경향을 보였다. 뿌리 상태인 인삼의 모상근의 경우에는 광상태에서 NaCl를 첨가한 배지에 배양시 0.04M에서부터 안토시안이 형성되기 시작하여 0.08M에서는 눈으로 확인이 가능할 정도의 많은 량이 형성되었다. 안토시안을 함유한 세포주는 다른 세포주에 비해 crude saponin뿐만 아니라 total ginsenoside의 함량도 높은 경향을 보였으며 panaxatriol보다 panaxadiol이 2배 이상 많았다.

• 방사성폐기물학회지
• /
• 제7권2호
• /
• pp.109-114
• /
• 2009

1.0m 길이의 광 경로를 가진 액체 광도파 모세관 셀(LWCC, Liquid Waveguide Capillary Cell)을 이용하여 악티나이드 원소 중 몰흡광계수가 작은 우라늄 6가 (U(VI)) 및 플루토늄 5가 (Pu(V)) 이온의 흡수스펙트럼을 측정하고, 검출한계를 조사하였다. 방사성 동위원소인 플루토늄을 분석하기 위하여 LWCC를 글로브 박스 내부에 설치하였고, 광섬유를 이용하여 상용의 분광광도계에 연결하였다. 이 분광장치를 이용하여 측정한 U(VI), Pu(V)의 몰흡광계수는 각각 8.14${\pm}$0.07 (414 nm), 17.00${\pm}$0.16 (569 nm) $M^{-1}cm^{-1}$이고, 검출한계는 각각 0.74, 0.35 ${\mu}$M이다. 측정한 검출한계는 분광광도계에 일반적으로 장착할 수 있는 1.0 cm 광 경로의 석영 셀을 이용하는 경우와 비교하여 30 배 이상 개선된 값이다. 이 분광장치를 Pu(VI)의 가수분해 반응 측정에 적용하여 Pu(VI)의 환원에 의해 생성되는 미량의 Pu(V)을 검출할 수 있었고, 미량으로 존재하는 Pu(V) 화학종이 Pu(VI) 가수분해 화학종의 형성상수를 측정할 때 오차의 원인으로 작용할 수 있음을 확인하였다.