• 공업화학
• /
• 제7권1호
• /
• pp.203-213
• /
• 1996

평형 추출장치를 사용하여 유기산의 물리추출과 반응추출에서 추출도에 미치는 추출제의 종류와 농도, 용매의 영향을 조사하였다. 사용된 유기산은 아크릴산과 메타크릴산이었고, 추출제로는 n-octylamine(OA)과 di-n-octylamine(DOA), tri-n-octylamine(TOA)및 tri-octylmetyl ammonium chloride(TOMAC ; Aliquat 336)을 사용하였다. 실험결과 반응추출에서 추출도는 물리추출의 경우보다 2~9배 정도 증가 되었으며, 유기산의 추출도에 미치는 추출제의 영향은 OA, TOMAC, DOA 및 TOA의 순서로 추출도가 증가하였으며, 또한 추출제의 농도가 증가할수록 추출도가 증가하였다. 용매의 영향은 종래의 용매의 유전상수보다는 용해도인자에 의한 용매선택 방법이 신뢰성이 있었고, 용질과 용매의 용해도인자의 차이가 작을수록 추출도가 증가하여 케로진, 크실렌, 클로로포롬, MIBK 및 n-BAc의 순서로 좋아졌다.

• 멤브레인
• /
• 제6권1호
• /
• pp.53-57
• /
• 1996

본 연구는 독성이 매우 강하여 체내에 미량이 흡수되어도 큰 영향을 미치며, 난분해성 물질로서 재래식 방법으로는 잘 제거가 되지 않고 있는 염소계 유기화학물들인 트리클로로에틸렌(TCE)과 퍼클로로에틸렌(PCE)의 효과적인 분리 제거를 위하여 고분자 복합막을 이용한 투과증발법을 적용하여 검토하여 보았다. 고분자 복합막은 염소계 유기화합물에 대한 선택층으로써 폴리이소부틸렌(PIB), 기계적 강도를 높이기 위하여 지지층으로써 부직포위에 코팅된 다공성 폴리에테르술폰으로 구성되었다. 용해도 파라미터차($\Delta{ps}$)를 구한 결과, TCE 및 PCE에 대한 용해도 파라미터차가 물과의 용해도 파라미터차에 비해 훨씬 작음을 알 수 있으며, 이를 통해 폴리이소부틸렌은 염소계 유기화합물에 대한 복합막의 선택층 소재로 사용하기에 적합함을 알 수 있다. 투과증발법을 이용하여 TCE 및 PCE의 분리를 실시한 결과, 폴리이소부틸렌 복합막의 경우 TCE 및 PCE의 선택적 분리에 적합함을 알 수 있으며, TCE 보다 PCE의 선택적 제거에 더 적합함을 알 수 있었다.

• 한국음향학회지
• /
• 제19권4호
• /
• pp.101-106
• /
• 2000

광대역 고분자 초음파 변환기를 이용한 초음파 비선형 파라메타 B/A 측정장치를 이용하여 생체조직에서 지방질의 농도에 대한 B/A의 의존성을 알아보기 위하여 계란의 흰자와 노른자의 혼합에 대하여 조사하였다. 이들 두 성분에 대한 음속과 밀도가 서로 1% 정도임에도 불구하고 yoshizuni등에 의해 제시된 선형성보다 이차적 의존성이 더 있음을 확인하였다. 이것은 생체조직을 fat과 nonfat의 두 부분으로 나누어 지방질의 농도에 대한 초음파 비선형 파라메타 B/A와 음속의 크기에 대하여 본 연구에서 제시한 이론식과 잘 일치하였다. 또한 지방질이 없는 skim milk의 다양한 용해도 성분에 대한 B/A와 음속을 측정한 결과 용해도의 농도가 클수록 B/A와 음속의 값이 커짐을 알 수 있었으며, 이들에 영향을 주는 것은 단백질 등으로 예상된다.

• Bulletin of the Korean Chemical Society
• /
• 제26권1호
• /
• pp.139-145
• /
• 2005

Artificial neural networks (ANNs), for a first time, were successfully developed for the modeling and prediction of solvent effects on rate constant of [2+2] cycloaddition reaction of diethyl azodicarboxylate with ethyl vinyl ether in various solvents with diverse chemical structures using quantitative structure-activity relationship. The most positive charge of hydrogen atom (q$^+$), dipole moment ($\mu$), the Hildebrand solubility parameter (${\delta}_H^2$) and total charges in molecule (q$_t$) are inputs and output of ANN is log k$_2$ . For evaluation of the predictive power of the generated ANN, the optimized network with 68 various solvents as training set was used to predict log k$_2$ of the reaction in 16 solvents in the prediction set. The results obtained using ANN was compared with the experimental values as well as with those obtained using multi-parameter linear regression (MLR) model and showed superiority of the ANN model over the regression model. Mean square error (MSE) of 0.0806 for the prediction set by MLR model should be compared with the value of 0.0275 for ANN model. These improvements are due to the fact that the reaction rate constant shows non-linear correlations with the descriptors.

• Journal of Pharmaceutical Investigation
• /
• 제41권4호
• /
• pp.217-225
• /
• 2011

The aim of this work was to prepare porous osmotic pump tablets for controlled delivery of Aceclofenac. Aceclofenac solid dispersion was prepared to improve the solubility by using the drug - carrier (Mannitol) ratio of 1:1. The osmotic pump tablets were prepared using the solid dispersed product of Aceclofenac. The formulation contains potassium chloride as osmotic agent, cellulose acetate as semipermeable membrane, poly ethylene glycol (PEG 4000) as pore former and sodium lauryl sulphate (SLS) as solubility enhancer. The formulations were designed by the general factors such as osmotic agent and pore former. All formulations were evaluated for various physical parameters and, the in vitro release studies were conducted as per USP. The drug release kinetic studies such as zero order, first order, and Higuchi and Korsmeyer peppas were determined and compared. All the formulations gave more controlled release compared to the marketed tablet studied. Numerical optimization techniques were applied to found out the best formulation by considering the parameter of in vitro drug release kinetics and dissolution profile standards. It was concluded that the porous osmotic pump tablets (F7) composed of Aceclofenac solid dispersion/Potassium chloride/Lactose/Sodium lauryl sulphate/Magnesium Stearate (400/40/95/10/5, mg/tab) and coating composition with Cellulose acetate/ PEG 4000 (60/40 %w/w) is the most satisfactory formulation. The porous osmotic pump tablets provide prolonged, controlled, and gastrointestinal environment-independent drug release.

• 한국의류산업학회지
• /
• 제5권5호
• /
• pp.520-528
• /
• 2003

Chitosan was depolymerized by oxidizing agent, hydrogen peroxide ($H_2O_2$) and general properties of resulting low molecular weight chitosan(LMWC) were studied. Effect of amount of $H_2O_2$, ratio of $H_2O_2$/chitosan, and reaction temperature were investigated in preparing LMWC. In addition, the reduction of molecular weight of prepared LMWC were measured after a certain time passage. Pre-swelling treatment of starting chitosan affected uniform and mild reaction of depolymerization and increased the solubility of resulting LMWC. Prepared LMWC (Mw 100,000) showed a decrease in Mw by 25-35%. Prepared LMWC(Mw 60,000-70,000) showed a decrease in Mw by 10-15% after 7 months. Therefore, this depolymerizing process can be concluded desirable in terms of stability. In addition, yellowing of pre-swelling treated chitosan upon time passage was insignificant compared with that of untreated chitosan. Therefore, pre-swelling treatment of chitosan before depolymerization would be beneficial in terms of stability of physical state.

• 한국세라믹학회지
• /
• 제32권9호
• /
• pp.1056-1064
• /
• 1995

95Pb(Mg1/3Nb2/3)O3-5PbTiO3 (hereinafter designated as 95PMN-5PT) system was prepared by the columbite-precursor method with 2 mol% excess PbO to compensate the PbO loss during thermal process. The amount of CuO was 1~10 mol%, and the effects of CuO addition on the dielectric properties of this system have been investigated. From the microstructures, XRD analysis and dielectric measurements, the solubility limit of CuO in 95PMN-5PT was found to be around 3 mol%. Lattice parameter and Curie temperature were found to be decreased as the amount of CuO increased up to the solubility limit. This result confirmed that the Cu2+-ions substituted the Pb2+-ions. It was revealed that the addition of CuO on 95PMN-5PT promoted the sinterability and properties. The room temperature dielectric constant, the loss factor and the specific resistivity of the specimens processed with optimum conditions were 23000, 1%, and 8$\times$1011Ω.cm, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제21권10호
• /
• pp.951-952
• /
• 2000

Acylation of an intermediate tetrahydroxoplatinum(IV) complex, $[Pt(OH)_4(dach)]$ (dach = $trans-(\pm)-12-di-aminocyclohexane)$, with one or two kinds of carboxylic anhydrides in stepwise manner afforded various car-boxylatoplatinum(IV) complexes, $[Pt(O_2CR)\chi(OR’)4-\chi(dach)]$ (R = $(CH_2)_3CH_3$ or $C(CH_3)_3$, R’ = H or $OCCH_3$, and $\chi$ = 1-4) with a wide range of lipophilicity. The title complexes were subjected to bioassay using the murine leukemia L1210 cell line, and in particular, their in vivo oral antitumor activity was attempted to correlate with their lipophilicity and water solubility. The most orally active complex exhibited intermediate lipophilicity and water solubility, but it has been found that an exact relationship between the lipophilicity and oral anticancer activity could not be established, since the lipophilicity of the complexes is not the sole parameter to determine the oral activity. One of the important intermediate complexes partially substituted was subjected to X-ray anal-ysis for positit of the substituted group: $[Pt(OPiv)_3(OH)(dach)]$ crystallizes in the tetragonal sys-tem, space group $P42_1c$ with a = 21.161(3) $\AA$, b = 21.161(6) $\AA$, c = 12.816(3) $\AA$, $\alpha=\beta=$ r $=90^{\circ}$, V = 5739(2) $\AA^3$ and Z = 8.

• 멤브레인
• /
• 제28권5호
• /
• pp.320-325
• /
• 2018

FASs (fluoroalkylsilanes)로 표면 개질한 소수성 막에 대한 부탄올/물, 이소프로판올/물 용액의 수착(sorption)량을 측정하였으며 이들 수착 특성을 Hansen 용해도 파라미터를 이용하여 해석하였다. 부탄올의 수착량이 이소프토판올보다 많았으며, 이는 부탄올의 용해도 파라미터(${\delta}_t=20.4$)와 FASs 소수성 막의 용해도 파라미터(${\delta}_t=16.9$)와의 차이가 이소프로판올 (${\delta}_t=24.6$)과의 차이보다 작기 때문인 것으로 설명할 수 있다. 극성력(${\delta}_p$) 측면에서 살펴보면, FASs 극성력(${\delta}_p=4.6$)과 부탄올의 극성력(${\delta}_p=6.3$)과의 차이가 FASs 극성력(${\delta}_p=4.6$)과 이소프로판올의 극성력(${\delta}_p=9.0$)과의 차이보다 작다. 이는 부탄올-FASs 간의 극성력 차이가 이소프로판올-FASs 간의 극성력 차이보다 작아서 부탄올-FASs 간의 상호인력이 크다는 것을 의미하며, 수착량이 크게 나타나는 결과를 설명할 수 있다. 본 실험결과로부터 막에 대한 알코올의 수착특성, 용매에 대한 용질의 용해도 등을 분석하는데 용해도 파라미터를 이용할 수 있음을 알 수 있다.

• Restorative Dentistry and Endodontics
• /
• 제42권1호
• /
• pp.9-18
• /
• 2017

Objectives: This study evaluated color differences (${\Delta}Es$) and translucency parameter changes (${\Delta}TPs$) of various computer-aided design/computer-aided manufacturing (CAD/CAM) blocks after immersion in coffee. Materials and Methods: Eight CAD/CAM blocks and four restorative composite resins were evaluated. The CIE $L^{\ast}a^{\ast}b^{\ast}$ values of 2.0 mm thick disk-shaped specimens were measured using the spectrophotometer on white and black backgrounds (n = 6). The ${\Delta}Es$ and ${\Delta}TPs$ of one day, one week, and one month immersion in coffee or water were calculated. The values of each material were analyzed by two-way ANOVA and Tukey's multiple comparisons (${\alpha}=0.05$). The ${\Delta}Es$ after prophylaxis paste polishing of 1 month coffee immersion specimens, water sorption and solubility were also evaluated. Results: After one month in coffee, ${\Delta}Es$ of CAD/CAM composite resin blocks and restorative composites ranged from 1.6 to 3.7 and from 2.1 to 7.9, respectively, and ${\Delta}TPs$ decreased. The ANOVA of ${\Delta}Es$ and ${\Delta}TPs$ revealed significant differences in two main factors, immersion periods and media, and their interaction except for ${\Delta}Es$ of TEL (Telio CAD, Ivoclar Vivadent). The ${\Delta}Es$ significantly decreased after prophylaxis polishing except GRA (Gradia Block, GC). There was no significant correlation between ${\Delta}Es$ and water sorption or solubility in water. Conclusions: The ${\Delta}Es$ of CAD/CAM blocks after immersion in coffee varied among products and were comparable to those of restorative composite resins. The discoloration of CAD/CAM composite resin blocks could be effectively removed with prophylaxis paste polishing, while that of some restorative composites could not be removed.