• Fibers and Polymers
• /
• v.5 no.2
• /
• pp.117-121
• /
• 2004

Optimum condition concerning the content of pretreatment print paste and steaming time for ink-jet printing was newly developed through the orthogonal analysis. The cotton fabric treated under the newly developed optimum condition could achieve a high level of colour yield similar to that of the commercially pretreated cotton fabric available in the market for ink-jet printing. The results were discussed thoroughly in this paper.

• KSBB Journal
• /
• v.6 no.4
• /
• pp.351-361
• /
• 1991

This study is on the investigation of hydrogen production and substrate removal by photosynthetic bacteria. After using of Rhodospillum rubrum KS-301 and IFO 3986, which are photosynthetic bacteria as strains, R. rubrum KS-301 was turned out a better strain. And result of experiment in which glucose and sodium lactate, components of wastewater, were used limiting substrates, showed that the productivity of hydrogen was indifferent with the kind of substrates. In batch experiments using free cells and immobilized whole cells, the decrease in hydrogen productivity was observed in the latter case. From the results of these experiments, specific growth rate of cells, specific utilization rate of glucose, and specific production rate of hydrogen were calculated. And each rate was expressed in the form of Monod equation of which parameters were estimated. Also the optimum condition of hydrogen production for free cells was $30^{\circ}C$, pH 7, and 12,000 Lux, and the optimum immobilized condition was as follows: initial immobilized cell concentration 1.0g/L, sodium alginate concentration 2% and light intensity 12,000 Lux.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.2
• /
• pp.358-369
• /
• 1997

Hypercholesterolemia is a main risk factor to develop cardiovascular disease, a major cause of death in Korea currently. Dietary factors which shows hypocholesterolemic effect have been reported, which includes plant proteins, unsaturated fatty acids, milk, calcium, flavonoids. Numerous animal and human studies confirmed the pronounced hypocholesterolemic effects of soluble dietary fiber, such as psyllium husk, pectin, sodium alginate, guar gum. Several hypotheses have been proposed to explain the hypocholesterolemic effect of dietary fiber, including binding of bile acids by fiber, interference of lipid absorption and reduced hepatic cholesterol synthesis by propionate, a product of soluble dietary fiber fermentation. Several other hypotheses have been proposed, and these hypotheses are not mutually exclusive.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.4
• /
• pp.289-295
• /
• 2003

This is a part of study on the hydrolysis of seaweed using microorganisms. A microflora sample obtained from a decayed pine tree was purified by pure culture of 4 times. As the result, 16 isolated strains were obtained from the microflora sample and then each strain was incubated in a liquid medium with sea tangle powder for 3 weeks. Ratios of reduced sugar to total sugar of 08A211, 08C221 and 08B121 strains were highest. Accordingly, these three strains were incubated in 3 different liquid media of sodium alginate, sea tangle powder, and sea mustard powder for 3 or 4 weeks. The ratios of reduced sugar to total sugar and cell growth were measured once a week. Cell growth and ratios of reduced sugar to total sugar was highest for 08B121 in all the liquid media.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.6
• /
• pp.492-498
• /
• 1984

We have reported the seasonal and portional variation in the composition of uronic acid of alginic acid from Ecklonia cava in the previous study. In the present paper, uronic acid block structure of alginic acid from Ecklonia cave was investigated, and some related properties such as viscosity, the dependence on temperature and substitution of metallic ion were also discussed. The proportion M block was highest amnog three blocks in both of frond and stipe. The average values of M and G block ratios were $51.6|%\;and\;32.3\%$ in the frond, whereas $45.7\%\;and\;38.6\%$ in the stipe, respectively. The proportions of alternating blocks in the frond and stipe were similar, and the values were $16.1\%$ in the frond and $15.6\%$ in the stipe. The viscosity of $1\%$ sodium alginate solution was almost inversely proportional to the M/G and/or M block ratio. Viscosities were marked maximum from summer to autumn and minimum winter to spring. In the value of lower M/G and M block ratio, the viscosity seemed to have a considerable dependence on temperature. The temperature dependence was more appearant in the alginic acid from the frond (M/G ratio, 0.95; M block, $54.2\%$) collected in July and the stipe (M/G ratio, 1.61; M block $47.6\%$) in April. The affinity with metallic ion appeared higher in order of $Pb^{2+}>Cu^{2+}>Co^{2+}>Zn^{2+}$. The amounts of metallic ion exchange of the $Pb^{2+},\;Cu^{2+},\;Co^{2+}\;and\;Zn^{2+}$ were ranged from 3.4. to 4.7, 2.5 to 3.2, 1.8 to 2.2 and 1.6 to 1.7 meq/(g. sodium alginate), respectively.

• Microbiology and Biotechnology Letters
• /
• v.17 no.2
• /
• pp.165-169
• /
• 1989

To achieve higher ethanol productivity in the fermentation system, a continuous ethanol production has been investigated with the air-supplement in a packed-bed immobilized cell reactor system. Yeast cells were immobilized using sodium alginate gel. The results showed that, when the feed medium was saturated with oxygen through aeration into the medium reservoir, the maximum ethanol productivity of the reactor was enhanced from 35 g/$\ell$-gel-hr to 55 g/$\ell$-gel-hr at the residence time of 10-20 min. and the residence time for the 90% conversion of substrate to ethanol was reduced from 40 min. to 25 min. In case of 18% glucose medium, the maximum productivity was increased from 35 g/$\ell$-gel-hr to 45 g/$\ell$-gel-hr and time required for 90% conversion was from 90 min to 70 min. This behavior of air-supplemented reactor system might be due to the fact that both growth and viable fraction of yeast within the Eel were increased during reactor operation.

• Textile Coloration and Finishing
• /
• v.19 no.6
• /
• pp.21-27
• /
• 2007

The factors which affect the absorption and diffusion of disperse dye in print paste for polyester film were investigated using film roll method. When Emvatex print paste of different disperse dye concentrations were fixed by high temperature steaming(HTS) for 2 hr at $190^{\circ}C$, the dye uptake and diffusion distance of 50g/kg dye concentration for PET film were very low, but those of 100$\sim$300g/kg were increased with increasing dye concentration. It was found that sodium alginate(5%) was more effective for the absorption and diffusion of disperse dye to PET film than CMC(3%) and Emvatex(18%), and Emvatex showed comparatively low absorption in three thickeners used. The dye uptake and diffusion distance of disperse dye in sodium alginate paste for PET film were increased with increasing paste thickness to $160\sim180{\mu}m$, but were decreased at $200\sim220{\mu}m$ in both fixations of baking and HTS for 2 hr at $190^{\circ}C$, and were far more largely increased by fixation of HTS than baking because steam was very important for fixation. Also it was confirmed that dye uptake was slightly increased as steam supply pressure was raised from 1 $kg/cm^2$ to 2 $kg/cm^2$, andthe dye uptake and diffusion distance of disperse dye were outstandingly increased with raising fixing temperature from $170^{\circ}C$ to $190^{\circ}C$ and fixing time from 0.5 hr to 3 hr in the fixation of HTS.

• Food Science and Biotechnology
• /
• v.18 no.5
• /
• pp.1230-1236
• /
• 2009

Optimum conditions for the freeze-thaw stability (FTS) of mung bean starch (MBS) paste as a main ingredient in omija-eui were investigated. For the optimization of the paste preparation condition, the FTS of MBS prepared by boiling in a shaking water bath (BMSW) or by pressure-cooking in an autoclave (PCMA) were analyzed using a response surface methodology (RSM). In addition, the effects of various additives such as gums, sugars, and emulsifier were evaluated on the FTS of MBS paste prepared under optimal conditions. The predicted maximal FTS of MBS paste prepared by the PCMA method (73%) was higher than that of the paste prepared by the BMSW method (36%). In case of additives, gellan gum and sodium alginate effectively prevented the syneresis of MBS paste in the BMSW method and in the PCMA method, respectively. The use of a fructose fatty acid ester as an emulsifier decreased syneresis in a dose-dependent, while the addition of sugars accelerated syneresis. Consequently, MBS paste for omija-eui preparation may be efficiently prepared by adding sodium alginate and fructose fatty acid ester under the optimal conditions of 4.3% MBS content, $121^{\circ}C$ heating temperature, and $89^{\circ}C$ cooling temperature by pressure-cooking in an autoclave.

• Korean Journal of Food Science and Technology
• /
• v.24 no.5
• /
• pp.456-462
• /
• 1992

This study was performed to rapid fermentation from sardine hydrolyzate by using column reactor. The column reactor was constructed from three glass columns $(30cm{\times}5cm)$ and each column was packed with colloidal silica and sodium alginate (1:5) on which Pediococcus halophilus R-22, Saccharomyces rouxii R-60 and Candida etchellsii H-50, respectively, was previously fixed. At that time, optimal conditions for rapid fermentation were found the pH of 5.2, temperature of $30^{\circ}C$ and 10% NaCl. For rapid fermentation, immobilized whole cells of P. halophilus R-22, S. ruoxii R-60 and C. etchellsii H-50 packed the each column reactor were produced 0.75% lactic acid, 2.5% ethylalcohol and 18 mg/l 4-ethylguaiacol under the optimal conditions.

• Korean Journal of Medicinal Crop Science
• /
• v.28 no.2
• /
• pp.128-135
• /
• 2020

Background: Sowing seeds of Adenophora triphylla is known to be difficult owing to their small size and irregular seed shape. Therefore, this study was conducted to develop a seed pelleting technique to save labor during sowing. Methods and Results: To identify the optimal germination temperature for A. triphylla seeds, the temperature range was set from 17℃ to 32℃. Germination surveys were conducted in plastic greenhouse conditions in March, April, and May to determine the appropriate sowing time. The optimal germination temperature for A. triphylla seeds was 29℃ and May was the optimal sowing time in plastic greenhouse conditions. Covering materials for seed pelleting used talc (T), kaolin (K), calcium carbonate (C), and vermiculite (V). The pellet binder used agar (A), pectin, xanthan gum, polyvinyl alcohol (PVA), and sodium alginate (S). The best suited treatment mixture were the best suited in kaolin / calcium carbonate / vermiculite (KCV), talc / calcium carbonate / vermiculite (TCV) mixture treatment for covering material, and sodium alginate (S), agar (A) as pellet binder, respectively. The germination rate was the best in TCV mixed with S. Conclusion: The mixture of TCV (2 : 1 : 3) + 1.5% S (TCVS), was found to be the best pelleting materials for A. triphylla seeds, and seed pelleting can be labor-saving during sowing.