• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.232-237
• /
• 2008

CIS국가는 구소련국가연합을 지칭하는 말로써, 각 국의 설계 규준은 구소련의 규준인 SNiP을 기본으로 작성하여 서로 유사한 부분이 많이 존재한다. 내진 SNiP 규준은 강진지역인 카자흐스탄을 중심으로 정립되어 구소련의 기준으로 사용되었으며, 독립이후 각 국의 상황에 맞게 발전되었다. 일정규모 이상의 건물은 SNiP 이외 별도의 기술지침 (TU)을 발급받아야 하며, 건축 계획시부터 내진에 유리한 방향으로 설계를 진행한다. 본문에서 소개된 주거복합시설은 계획단계에서부터 내진 안정성을 우선적으로 고려하였으며, 해석프로그램 및 배근방법을 현지에 맞게 적용하였다. 또한 실제 도면 표기방법에서도 국내표기방식과 현지 표기방식을 절충하여 현지와 맞는 도면을 작성하였다.

• 한국멀티미디어학회논문지
• /
• 제23권3호
• /
• pp.430-439
• /
• 2020

The government of the Republic of Korea has introduced SNI blocking method since February 2019 to block illegal sites. Currently, this policy has been considered as a controversial policy in South Korea therefore, about 270,000 South Koreans have been calmed down by and the presidential office petition because people believe that blocking https by SNI would invasion of privacy and freedom of use of the Internet. As soon as the SNI blocking method was used, the bypass method was opened to the Internet, causing side effects. In this study, identifies the development of Internet blocking technology and the development of new technology that bypasses the technology. It also examines Internet censorship in other countries and identifies problems in blocking technology. Through this study would present policy suggestions and technical methodologies for sound Internet use.

• 한국방재학회 논문집
• /
• 제3권4호
• /
• pp.131-143
• /
• 2003

본 연구의 목적은 하천 관리자들에게 하천의 자연성 증진의 중요성을 이해시키고, 하천을 자연스러운 상태로 되돌리는 과정에서 하천이 처한 상황에 대한 진단과 처방을 위한 하천자연도 평가 방법을 개발하는 것이다. 본 연구에서는 하천의 자연도평가와 그 적용성의 확인을 위해 수로의 발달, 종방향, 횡방향, 하상구조, 저수로변 구조, 하천주변, 수질 등 7가지 자연도 평가기법의 항목을 제안하였다. 자연도평가를 위해 복하천을 대상하천으로 선정하였다. 복하천에서 자연도지수는 $2.2{\sim}3.8$정도였고, 평균지수는 3.1로 대부분이 3등급을 나타내었다. 7개 지수 중에서 횡단면이 가장 높은 등급이었고, 수로의 발달이 가장 낮은 등급이었다. 본 연구에서는 하천의 자연도 등급을 통해 하천의 자연성을 파악할 수 있었으며, 복원해야 할 하천의 선택과 훼손된 하천의 복원구간 및 방법을 결정할 수 있었다.

• 디지털산업정보학회논문지
• /
• 제15권1호
• /
• pp.53-59
• /
• 2019

As the number of harmful sites increases, many social problems are occurring. Therefore, in order to solve this problem, the government is carrying out activities to block access to web sites to harmful sites based on the law. However, due to the change from HTTP to HTTPS protocol, it has become difficult to block the harmful sites in the existing method. In the existing HTTP protocol, a method of blocking the site corresponding to the harmful site domain list by utilizing the DNS information was used. However, due to the generalization of HTTPS, it is difficult to block the harmful sites in the existing method. Therefore, the ISP uses the method of blocking the website using the SNI field in the TLS (Transport Layer Security) Handshake protocol used for HTTPS. However, since the method using SNI field raises the concern of monitoring Internet users or exposing information about connected sites, in this paper, we proposed method which can support anonymity to Internet users while blocking harmful sites. The suggested method also can support integrity and source authentication to the transmitted data.

• 전자공학회논문지B
• /
• 제30B권7호
• /
• pp.59-69
• /
• 1993

In this paper, a new matching strategy for 3-D object recognition, based on the Surface Normal Images (SNIs), is proposed. The matching strategy using the similarity decision function [9,10] lost the efficiency and the reliability of matching, because all features of models within model base must be compared with the scene object features, and the weights of the attributes of features is given by heuristic manner. However, the proposed matching strategy can solve these problems by using a new approach. In the approach, by searching the model base, a model object whose features are fully matched with the features of sceme object is selected. In this paper, the model base is constructed for the total 26 objects, and systhetic and real range images are used in the test of the system operation. Experimental result is performed to show the possibility that this strategy can be effectively used for the SNI based recognition.

• 한국전산구조공학회논문집
• /
• 제30권3호
• /
• pp.223-230
• /
• 2017

토목시설물 건설사업에 BIM(building information modeling)이 적극적으로 도입되면서 시설물의 생애주기 동안의 활용도를 극대화할 수 있는 방안이 모색되고 있으며, 그 중, 시설물 공사 중 건설장비의 동적 거동을 반영한 검토 사례는 드물고 관련 기술 수준도 낮은 상황이다. 본 연구에서는 BIM 기반으로 구성된 가상현장 내에서 동적인 가상건설 장비 모델을 이용하여 공사단계에서 발생하는 장비운용의 안전성과 효율성을 검토할 수 있는 시뮬레이션 시스템을 개발하고 이를 실제 토목 현장에 적용하여 그 효용성을 분석하였다. 개발된 시뮬레이션 시스템이 건설장비에 대한 효과적인 3D 라이브러리 구축을 통해 공사관리자가 최적의 장비를 선정하고 경제적인 공사를 실현하기 위한 계획수립을 지원할 뿐 아니라 안전한 공사가 수행되도록 다각도의 분석을 가능케 해준다는 것을 확인할 수 있었다.

• Structural Monitoring and Maintenance
• /
• 제10권1호
• /
• pp.87-105
• /
• 2023

Seismic regulations have been updated from time to time to accommodate an increase in seismic hazards. Comparison of seismic fragility of the existing bridges in Indonesia from different historical periods since the era before 1990 will be the basis for seismic assessment of the bridge stock in Indonesia, most of which are located in earthquake-prone areas, especially those built many years ago with outdated regulations. In this study, seismic fragility curves were developed using incremental non-linear time history analysis and more holistically according to the actual strength of concrete and steel material in Indonesia to determine the uncertainty factor of structural capacity, βc. From the research that has been carried out, based on the current seismic load in SNI 2833:2016/Seismic Map 2017 (7% probability of exceedance in 75 years), the performance level of the bridge in the era before SNI 2833:2016 was Operational-Life Safety whereas the performance level of the bridge designed with SNI 2833:2016 was Elastic - Operational. The potential for more severe damage occurs in greater earthquake intensity. Collapse condition occurs at As = F_PGA x PGA value of bridge Era I = 0.93 g; Era II = 1.03 g; Era III = 1.22 g; Era IV = 1.54 g. Furthermore, the fragility analysis was also developed with geometric variations in the same bridge class to see the effect of these variations on the fragility, which is the basis for making bridge risk maps in Indonesia.

• 대한의용생체공학회:의공학회지
• /
• 제33권4호
• /
• pp.207-212
• /
• 2012

It is widely known that sciatic nerve injury (SNI) can negatively affect the biomechanical characteristics of the musculoskeletal system. However, there were no studies that evaluated and compared denervated side with another side limb at the same time. In this study, sixteen male 12-week-old mice were allocated into two groups: HEMI (Right Sciatic nerve denervated) and CON (Control). Both limbs were scanned using micro-CT at 0 week and 4 weeks. There were significant differences in relative variation (RV) of BMD and all structural parameters compared CON and HEMI in right tibia (p < 0.05). Tb.Th and Tb.Sp distributions were differed CON with HEMI in right tibia. In left tibia, there were significant differences in RV of BMD (p < 0.05) and Tb.Sp distribution. These result means that SNI can induce bone loss in the both side tibiae. However, there was a different profile of bone loss between left and right tibiae.

• 방사성폐기물학회지
• /
• 제10권4호
• /
• pp.237-246
• /
• 2012

본 연구에서는 콜로이드와 핵종의 복합이동에 관한 수치모델을 개발하였다. 콜로이드와 핵종의 반응-이동 지배방정식을 풀기 위하여 Operator Splitting Method 중 Strang의 분리 SNI 방식을 수치해석 방법으로 채택하였고 이는 MATLAB을 이용하여 코드화 되었다. 개발된 수치모델은 용질의 이동 및 분산만을 고려한 해석해를 통한 검증과정에서 피어슨 상관계수의 제곱값($r^2$)이 0.99 이상으로 나타나 모델의 정확성이 입증되었다.

• Structural Engineering and Mechanics
• /
• 제89권4호
• /
• pp.363-374
• /
• 2024

Significant changes have been made to estimate the punching shear capacity for edge column-slab joints in the latest editions of most current codes. The revised equations account for axial forces as well as moments conveyed to columns from slabs, which have a substantial impact on the punching resistance of such joints. Many key design parameters, such as reinforcement-ratio, concrete strength, size-effect, and critical-section perimeter, were treated differently or even ignored in various code provisions. Consequently, wide ranges of predicted punching shear strength were detected by applying different code formulas. Therefore, it is essential to assess the various current Codes' design-equations. Because of the similarity in estimated outcomes, only the ACI, EC, and SNiP are used in this study to cover a wide range of estimation ranges from highly conservative to unconservative. This paper is devoted to analyzing the techniques in these code provisions, comparing the estimated punching resistance with available experimental data, and finally developing efficient models predicting the punching capacity of edge column-slab connections. 63 samples from past investigations were chosen for validation. To appropriately predict the punching shear, newly updated equations for ACI and SNiP are provided based on nonlinear regression analysis. The proposed equations'results match the experimental data quite well.