• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.370-370
• /
• 2008

ITO 박막은 현재 차세대 디스플레이인 LCD, PDP, ELD 등의 평판 디스플레이의 화소전극 및 공통전극으로 가장 많이 적용되고 있는 소재이며, 최근에는 태양전지의 투명전극으로 그 용도가 더욱 증가되고 있다. 이러한 소자들의 투명 전도막으로 사용되기 위해서는 가시광선 영역에서 80% 이상의 높은 투과도와 낮은 면 저항을 가져야 한다. 광 투과도와 면 저항은 ITO 박막의 증착조건에 따라 변하게 되는데 본 연구에서는 DC 마그네트론 스퍼터링법을 이용하여 Indium-Tin Oxide (ITO) 박막을 제작하고, 제작된 ITO 박막의 전기적 특성과 광학적 특성을 측정하여 공정조건에 따른 박막의 특성 변화를 평가하였다. 증착 조건은 주로 기판 온도와 증착 시간을 변화시켰다. 본 실험에서는 $In_2O_3$ : $SnO_2$의 조성비가 9:1 비율의 순도 99.99% ITO 타겟을 사용하였으며, coming 1737 glass를 30$\times$30 mm 크기로 가공하여 기판온도와 증착시간을 변화시키면서 ITO 박막을 제조하였다. 예비실험을 통해 인가전력 50W, 초기 진공 $2\times10^{-6}$ Torr, 작업 진공 $3.5\times10^{-2}$ Torr, 기판과 타겟 사이의 거리를 10 cm로 고정하였다. 기판 온도는 히터를 가열하지 않은 상온 ($25^{\circ}C$)에서 $400^{\circ}C$까지의 범위에서 변화시켰고, 증착시간은 5분에서 30분까지의 범위에서 변화시켰다. 증착된 박막의 면 저항 촉정을 위해 4 point probe를 사용하였고, 홀 (hall) 계수 측정기 (HMS-300)를 이용하여 홀 계수를 측정하였으며, 또한 박막의 두께는 $\alpha$-step을 사용하여 측정하였다. ITO 박막의 상분석을 위해 XRD를 사용 하였고, SEM을 이용하여 미세구조를 관찰하였다. 실험 결과로는 기판온도 $400^{\circ}C$, 증착시간 15분 이상에서는 면 저항이 모두 $8\Omega$/$\Box$이하로 낮게 나왔으며, 투과율 또한 모두 80% 이상의 높은 투과도를 보였다. 또한 ITO박막의 전기 전도도는 캐리어 농도와 이동도의 측정을 통해 두 가지 인자들에 의해 비례되는 것을 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.187-191
• /
• 2006

Sputter deposition followed by surface treatment was studied using reactive RF plasma as a method for preparing titanium oxide $(TiO_2)$ films on the FTO $(SnO_2: F)$ substrate for dye-sensitized solar cells (DSCs). Anatase structure $TiO_2$ films deposited by reactive RF magnetron sputtering under the conditions of $Ar/O_2(5%)$ mixtures, RF power of 600W and substrate temperature of $400^{\circ}C$ were surface-treated by inductive coupled plasma (ICP) with $Ar/O_2$ mixtures at substrate temperature of $400^{\circ}C$, and thus the films were applied to the DSCs. We have chosen a solar cell width as a variable of a large-scaled DSCs and confirmed electric characteristics of an individual cell. As a result, the higher the internal resistance of DSC becomes, the wider the width gets. Internal resistance makes it difficult to collect photoelectron generated from dye. Ultimately up sizing DSC causes the increase of internal resistance and then has a bad effect on the cell characteristics.

• Nuclear Engineering and Technology
• /
• v.41 no.2
• /
• pp.149-154
• /
• 2009

The microstructure, the corrosion behavior and the oxide properties were examined for Zr-1.5Nb-0.4Sn-0.2Fe-0.1Cr (HANA-4) alloys which were subjected to two different final annealing temperatures: $470^{\circ}C$ and $570^{\circ}C$. HANA-4 was shown to have $\ss$-enriched phase with a bcc crystal structure and Zr(Nb,Fe,Cr)$_2$ with a hcp crystal structure with $\ss$-enriched phase being more frequently observed compared with Zr(Nb,Fe,Cr)$_2$. The corrosion rate of HANA-4 was increased with an increase of the final annealing temperature in the PWR-simulating loop, $360^{\circ}C$ pure water and $400^{\circ}C$ steam conditions, which was correlated well with a reduction in the size of the columnar grains in the oxide/metal interface region. The oxide growth rate of HANA-4 was considerably affected by the alloy microstructure determined by the final annealing temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.203-204
• /
• 2009

The Indium Zinc Tin Oxide (IZTO) thin films for flexible display electrode were deposited on poly carbonate (PC) and polyethersulfone(PES) and glass substrates at room temperature by facing targets sputtering (FTS). Two different kinds of targets were installed on FTS system. One is ITO ($In_2O_3$ 90 wt.%, $SnO_2$ 10 wt.%), the other is IZO ($In_2O_3$ 90 wt.%, ZnO 10 wt.%). As-deposited IZTO thin films were investigated by a UV/VIS spectrometer, an X-ray diffractometer (XRD), an atomic force microscope (AFM) and a Hall Effect measurement system. As a result, we could prepare the IZTO thin films with the resistivity of under $10^{-4}\;[{\Omega}{\cdot}cm]$ and IZTO thin films deposited on glass substrate showed an average transmittance over 80% in visible range (400~800 nm) in all IZTO thin films except in IZTO thin film deposited at $O_2$ gas flow rate of 0.1[sccm].

• Korean Journal of Human Ecology
• /
• v.11 no.4
• /
• pp.391-400
• /
• 2002

This study was intended to research the dyeing with natural walnut hull extracts over cotton, flax, rayon, wool, nylon and silk. We studied the dyeing conditions and mordant effect, and observed dyeability. The result are as follows: 1. In the dyeability with natural walnut hull extracts, protein and polyamide fiber has more dye uptake rather than cellulose fiber. 2. The optimum condition in the dyeing with natural walnut hull extracts was at $90^{\circ}C$, 12%(o.w.b) concentration in 90 mins. 3. In the case of the dyeability by repeated dyeing number, the dyeability of good dyeability fiber is improved in the first or second dyeing, but that of bad dyebality fiber is improved when it is dyed more repeatedly. 4. In the dyeablity treated with mordants, Al, Sn, and Mg don't have any differences, but Cu and Fe have some difference. The color of Fe mordant is green and the color of Cu mordant is blue. 5. In the case of the color fastness with mordant treatment, nylon is better than silk and wool in color fastness to washing but silk is better than nylon and wool in color fastness to light.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.857-860
• /
• 2002

The material that is both conductive in electricity and transparent to the visible-ray is called transparent conducting thin film. It has many field of application such as solar cell, liquid crystal display, transparent electrical heater, selective optical filter, and a optical electric device. In this study, indium tin oxide (ITO ; Sn-doped $In_2O_3$) thin films were deposited on $SiO_2$/soda-lime glass plates by a dc magnetron sputtering technique. The crystallinity and electrical properties of the films were investigated by X-ray diffraction(XRD), atomic force microscopy (AFM) scanning and 4-point probe. The optical transmittance of ITO films in the range of 300-1000nm were measured with a spectrophotometer. As a result, we obtained polycrystalline structured ITO films with (222), (400), and (440) peak. Transmittance of all the films were higher than 90% in the visible range.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.307-310
• /
• 2000

Antimony doped tin oxide (ATO) thin films were deposited at room temperature by ion-beam sputter deposition (IBSD) technique in oxidizing atmosphere utilizing Sb and Sn metal targets. Effect of Sb doping concentration, film thickness and heat treatment on electrical and optical properties was investigated. The thickness of as-deposited films was controlled approximately to $1500{\AA}$ or $2000{\AA}$, and Sb concentration to 10.8 and 14.9 wt%, as determined by SEM and XPS analyses. Heat treatment was performed at the temperature from $400^{\circ}C$ to $600^{\circ}C$ in flowing $O_2$ or forming gas. The resulting ATO films showed widely changing electrical resistivity and optical transmittance values in the visible spectrum depending on the composition, thickness and firing condition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.439-440
• /
• 2008

Indium Zinc Tin Oxide (IZTO) thin films for transparent thin film transistor (TTFT) were deposited on glass substrate at room temperature by facing targets sputtering (FTS). The FTS system was designed to array two targets facing each other and forms the high- density plasma between. Two different kinds of targets were installed on FTS system. One is ITO ($In_2O_3$ 90wt.%, $SnO_2$ 10wt.%), the other is IZO($In_2O_3$ 90wt%, ZnO 10wt%). The conductive and optical properties of IZTO thin film is determined depending on variation of DC power and working pressure. Therefore, IZTO thin films were prepared with different DC power and working pressure. As-deposited IZTO thin films were investigated by a UV/VIS spectrometer, an X-ray diffractometer (XRD), a scanning electron microscopy (SEM), a Hall Effect measurement system. As a result, all IZTO thin films deposited on glass substrate showed over 80% of transmittance in visible range (400~800 nm) at $O_2$ gas flow rate. We could obtain IZTO thin films with the lowest resistivity $5.67\times10^{-4}$ [$\Omega{\cdot}cm$] at $O_2$ gas flow rate 0.4 [sccm).

• Macromolecular Research
• /
• v.17 no.8
• /
• pp.575-579
• /
• 2009

Copolymerization of L-lactide and s-caprolactone initiated by tin (II) octoate (Sn(Oct)$_2$) was carried out in supercritical chlorodifluoromethane (R22) with varying reaction conditions (time and temperature) and amounts of monomer and catalyst, under a pressure of 250 bar. The optimum conditions were a reaction time of 10 h and a temperature of 130 $^{\circ}C$, which is similar to the temperature used in bulk copolymerization system. The conversion increased from 56% to 76% by increasing the reaction time from 1 to 10 h. The molecular weight also increased to 75,900 g.mol$^{-1}$ over the same period, while the increased monomer concentration resulted in a high molecular weight of 86,400 g.mol$^{-1}$ and a monomer conversion of 84%. Raising the reaction temperature from 90 to 130 $^{\circ}C$ increased the monomer conversion as well as the poly-L-lactide-co-${\varepsilon}$-caprolactone (PLCL) molecular weight. The variation on the stannous octoate catalyst suggested that less catalyst would decrease the caprolactone content of the polymer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.214-214
• /
• 2010

Indium-tin-oxide(ITO)는 평판디스플레이 산업이 성장함에 따라 그 수요는 계속 늘고 있지만 세계적으로 In의 매장량의 한계로 그 단가가 매우 높다. 또한 ITO는 플렉시블 디스플레이에 적용함에 있어서 고온 공정으로 인해 많은 단점을 보이고 있어 이를 대체할 새로운 투명전극의 개발이 활발히 진행되고 있다. 본 연구에서는 IZTO($In_2O_3$:ZnO:$SnO_2$=80:10:10 wt.%)의 In 량을 절감한 조성의 타겟을 제조하였다. 그리고 유리기판 위에 IZTO 박막을 펄스 DC 마그네트론 스퍼터링을 이용하여 증착압력과 활성 산소의 분압을 변화시키며 증착하였다. 증착압력의 변화는 3mTorr~8mTorr 범위에서 제어하였고 활성 산소의 분압은 0%~3% 범위에서 제어하였으며 기판의 온도의 제어 없이 상온에서 증착하였다. 증착한 박막은 전기적, 광학적 및 구조적 특성 등을 조사하였다. 증착압력 6mTorr와 산소분압 2%의 조건에서 비저항은 $5.07{\times}10^{-4}\;({\Omega}{\cdot}cm)$, 캐리어 농도는 $2.96{\times}10^{20}(cm^{-3})$, 이동도는 $41.6(cm^{-2}/Vs)$로 가장 좋은 전기적 특성을 보였다. 박막의 투과율을 측정한 결과 평균 85% (400nm~800nm)이상의 우수한 광학적 특성을 보였다. 또한 이 IZTO 박막을 이용하여 OLED 소자를 제작하여 그 특성을 조사하였다. 조사 결과 플렉시블 디스플레이 분야에서 IZTO 박막은 In 절감효과와 상온 공정에서 우수한 투명전극 특성을 보여 ITO를 대체할 물질로 가능성을 보여주었다.