• 정보저장시스템학회논문집
• /
• 제5권1호
• /
• pp.1-7
• /
• 2009

Recently, the growing market demand for small and slim mobile phone cameras requires the size reduction of the camera module. In this paper, an auto-focusing actuator for camera phones is proposed by converting the rotational motion by a rotary VCM actuator into the linear motion using a novel cam structure. This new concept for auto-focusing module enables the reduction of the module thickness and low power consumption. This paper presents the theoretical analysis and optimal design for VCM actuator, cam structure and preload spring. Finally, the experimental results using a prototype with the size of $9.9{\times}9.9{\times}5.9\;mm^3$ are compared with the theoretical predictions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.891-892
• /
• 2006

An obstacle is an element for power to small and slim the existing portable communication set. Developed Inductor for Chip-type electric power in needs to solve this. Stack applied Process, and used gap of a magnetic path, and made a height of an element to 1.0T or below, and this development commodity did product for saturation prevention to materials of silver. Saturation current characteristic of Chip-type inductor was low compare with winding-type inductors, but bulk against performance were had superior excellence. Chip-type inductor can raise performance per unit volume compared with the existing inductors at these papers. Therefore, acceleration can get growth of small and slim of a mobile product done, and expect.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.770-774
• /
• 2003

We propose the re-design method of modal parameters to depress the 2nd resonance peak of the ultra-slim-height optical pick-up actuator. With the addition of tile counter mode near the 2nd resonance frequency, we can achieve the gain margin which is sufficient to meet the system requirement. It would alleviate the burden of the additional filter for a high-speed drive.

• 설비공학논문집
• /
• 제14권2호
• /
• pp.116-126
• /
• 2002

A three dimensional numerical analysis of the corrugated louver fin for a vehicle heat exchanger was performed. The heat transfer rate and the air pressure drop of the corrugated louver fins for a slim heater were compared with experimental results at the same operating conditions. As for the slim heater fin, we found an optimum fin pitch at certain operating conditions. As the fin pitch increased, the air pressure drop decreased. The vertical or flat top fin was superior to the common declined fin in the aspect of heat transfer performance. As the louver length increased, both the heat transfer rate and the air pressure drop increased.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제12권1호
• /
• pp.25-33
• /
• 2012

As to display products are made slim, the diameter of aluminum electrolytic capacitor is smaller and the length is longer to be fitted in. These small diameter and long length are pointed as the disadvantageous design factors of the capacitor's life cycle. So, the most electronic makers want to use proven capacitors (or well-known) to secure reliability of the electric products. In this study, we carried out the comparison analysis with two domestic capacitors and one foreign made capacitor. We designated separators, rubber breather and debris as the main factors that effect on the lifetime of capacitors. From the comparison results, we suggested the improvement points of the aluminum electrolytic capacitor.

• Steel and Composite Structures
• /
• 제13권2호
• /
• pp.171-185
• /
• 2012

The calculation of fire resistance for a composite structural element comprises the calculation of the temperature within its cross-section and of the load bearing capacity, considering the evolution of the steel and concrete mechanical properties, function of the temperature. The paper proposes a method to calculate the bending capacity under ISO fire, for Slim Floor systems using asymmetric steel beams, with a wider lower flange or a narrow upper flange welded onto a half hot-rolled profile. The temperatures in the cross-section are evaluated by means of empirical formulas determined through a parametrical analysis, performed with the special purpose non-linear finite element program SAFIR. Considering these formulas, the bending capacity may be calculated, using an analytical approach to determine the plastic bending moment, for different fire resistance demands. The results obtained with this simplified method are validated through numerical analysis.

• 패션비즈니스
• /
• 제16권6호
• /
• pp.52-62
• /
• 2012

This study researched the jeans street fashion for young men looked like 20s and 30s in Seoul, and analyzed jeans by silhouette by fit and color by washing. The photos were of jeans from the waist to the bottom; and among a total of 1,159 images, 847 images that could be analyzed were selected and used for the analysis. From the images used in the analysis, the jeans fits were categorized according to silhouette and color that were used for the visual selection. As a result, young men preferred fashion jeans like slim or skinny jeans. Most of the tight fitting skinny and slim jeans were slim baggy style jeans, like low waist & long rise with a low back york, which was a key trendy pants style. The jeans color analysis by washing finish showed that dark jeans were most frequently, most of the dark jeans had the original denim color based on the non or normal wash techniques. It is hoped that the results of this study can be used as basic data for the development of designs for jeans brands.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.283-285
• /
• 2007

이동 PC 및 기타 여러 가지 전자기기의 휴대화가 급속도로 증가함에 따라 저가형 Adapter의 소형화와 고효율화가 지속적으로 요구되고 있다. 이를 위해 본 논문에서는 기존의 다양한 토폴로지 중 구성소자의 개수가 적고, 스위칭 손실을 저감할 수 있는 준-공진형 플라이백 컨버터에 대한 최적 설계 방법을 제시하고 이론적 및 실험적 검증을 통해 Slim type 65W급의 고효율 Adapter를 구현한다.

• 정보저장시스템학회논문집
• /
• 제7권1호
• /
• pp.13-18
• /
• 2011

As a standard of optical disk drive (ODD) was determined to Blu-ray diks (BD), researches for securing slim drive thickness, high data transfer rate and high capacity have been progressed. The actuator for applying BD is also required to have high performances, such as compatibility, slim thickness and 3-axis motion. In this paper, an asymmetric dual lens actuator is proposed to satisfy abovementioned performances. To design the actuator in a limited space, stress analysis and design of experiment (DOE) are performed to reduce weight of moving part and increase driving force and flexible mode frequency. Consequently, the final model, which is satisfied with specifications, is secured.

• 설비공학논문집
• /
• 제18권4호
• /
• pp.370-376
• /
• 2006

The paper concerns an experimental study of fully developed laminar flow of a Newtonian and non-Newtonian liquid in concentric annuli with combined bulk axial flow and inner cylinder rotation. Pressure losses and skin friction coefficients have been measured for Newtonian fluid, water and non-Newtonian fluids, 0.2% aqueous of sodium carboxymethyl cellulose (CMC) and 5% bentonite solutions, when the inner cylinder rotates at the speed of $0{\sim}500$ rpm. The influences of rotation, radius ratio and working fluid on the annular flow field are investigated. And the new correlations among the skin friction coefficient, the Reynolds number and the Rossby number are presented with reasonable limits of accuracy in laminar flow regime.