• 소성∙가공
• /
• 제27권2호
• /
• pp.107-114
• /
• 2018

Although the application of high strength steel is increasing to cope with the various updated regulations of automobiles, high strength steel sheets are difficult to formulate due to the high tensile strength and low elongation of those materials. In this study, the slide motion was controlled using a servo press in order to improve the formability of the process of manufacturing ultra-high strength steel of above 1.2GPa. Also, the friction characteristics of the slid motion were investigated through a high speed friction test. The slide motion was optimized by adjusting the number of steps, the rising start position and the rise height of the slide. At the same time, it is noted that the optimal slide motion increased the forming depth by about 40%. From the results of the high speed friction test, the application of the slide motion reduces friction resistance, thereby improving friction characteristics and improving formability.

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.502-508
• /
• 2011

In this paper, we proposed vertical feeding mechanism for a slide parts feeder using the slide type method. This parts feeder of the slide type method have been proposed to suppress the dust generation from the feeding objects. The proposed parts feeder mechanism is composed with the casing hopper, the vertical feeding unit, the in-line feeder and linear shooter unit. And, these mechanisms did modularity through optimum design by means of mechanical and dynamical analysis using the RecurDyn(multi-body dynamics) analysis module. Also were carried out the virtual prototype using the 3-D CAD program. And it had been manufactured as the prototype of the slide parts feeder. The field test for validation of performance was performed directly at the inspection line of bolt and screw. In the field test, this slide parts feeder showed an efficiency of about 1.2 times the bowl feeder. It also showed an epoch reduction in the dust generation compared to the vibration bowl feeder. So this slide parts feeder will be applied useful in the vision inspection system for a screw and bolt.

• 해양환경안전학회지
• /
• 제15권3호
• /
• pp.251-256
• /
• 2009

이 연구에서는 전 유동장의 순간속도를 계측 할 수 있는 PIV계측기법을 슬라이딩 밸브의 폐쇄 직후에 적용하고 짧은 시간에 발생하는 디스크 주위의 비정상 속도를 계측하여 유동특성을 실험적으로 고찰하였다. 순간유동장을 분석한 결과를 기존의 압력변동을 측정한 연구 결과에 비교 검토한 결과 슬라이드 밸브 급폐쇄에 따른 속도변동이 크게 나타나는 시간구간은 0.1초 이내이고 주기는 0.12초로 추정되었다. 또한 원관 내부의 디스크 주위유동은 상부부터 폐쇄되면서 유로가 좁아져 순간적으로 빠르게 하류로 진행하였으며 폐쇄직후에 역류하는 속도의 크기는 4/120초까지 감소하다가 다시 증가하는 경향을 보였다. 그리고 완전 폐쇄 후 상류 측으로 역류하는 흐름의 영향으로 y/D=0.2 하부 영역에 역류하는 속도성분이 나타났으며, y/D=0.7, x/D=-0.3의 근방에서 0.2D 크기의 회전와류가 관찰되었다.

• 동력기계공학회지
• /
• 제16권6호
• /
• pp.52-58
• /
• 2012

Roll forming process is one of the most widely used processes in the world for forming metals such as a furniture drawer guide or an up and down slide guide. It can manufacture goods of the uniform cross section on a large scale throughout the continuous processing. In the domestic design and manufacture, roll forming process for production is taking most of the method of 2-point under rail slide. However, this method is vulnerable to the structural strength and stiffness is not suitable for high load conditions. Therefore, through systematic study of high load, low noise 3-point ball type of under rail slide its own design and manufacturing technology is the need to build. In this paper, to make center member of 3-point ball-type under rail slide for the refrigerator doors, the roll forming modeling and simulation are performed. Tensile test is performed about SCP-1 1/2H for determine the mechanical properties of materials. Modeling and simulation of roll forming is used MSC.MARC software of a dedicated analysis program used by rigid plastic finite element method. Interference between the roll and the final shape are predicted from the results of the simulation.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 봄 학술발표논문집 Vol.29 No.1 (A)
• /
• pp.430-432
• /
• 2002

가상현실 기반 실시간 원격교육 시스템에서는 오디오와 비디오 그리고 Presentation Slide외에 3D VRML Data를 이용하여 강의를 구성한다. 강사의 음성과 화상 외에 텍스트와 2D, 3D Graphics를 이용함으로써 강의의 효율을 높이고 있다. 이러한 실시간 강의 시스템에서 발생하는 각 미디어간의 동기화를 위해 본 논문에서는 Synchronization Event Model(SEM)을 정의하고, 이것을 기반으로 한 가상현실 기반 실시간 원격 교육 시스템에서의 멀티미디어 통합 브라우저를 설계하고 있다.

• Korea-Australia Rheology Journal
• /
• 제18권4호
• /
• pp.209-215
• /
• 2006

Recent research results on viscocapillary models of various pre-metered coating flows such as curtain, slide, and slot coatings have been reviewed in this paper. Such one-dimensional models have been simplified from two-dimensional Navier-Stokes equations for viscous coating flows with free surfaces, using integral momentum balances and lubrication approximation. It has been found that these viscocapillary models is capable of predicting flow dynamics in various coating systems, providing the good agreement with results by 2-D models.

• 대한수의학회지
• /
• 제10권1호
• /
• pp.11-23
• /
• 1970

Recently Carter(1952) reported the capsule antigens of Pasteurella multocida could be divided into four serological types A,B,C and D by means of precipitation tests. Subsequently he showed that the most sensitive for identification of these types involved the use of capsule substance adsorbed by erythrocytes in hemagglutination test. It may be somewhat difficult to conduct the hemagglutination test in small laboratory, because relatively large amounts of antisera and erythrocytes of the human O type are required for the test. A simple method for serological typing of P. multocida was the slide agglutination test employed by Little et al. (1943) and Namioka et al. (1962), but this method is still in controversy. The author tried adapting Carter's hemagglutination method to the slide method so called "micromethod technique", and studied on the stabilization of erythrocytes for use of slide hemagglutination to P. multocida although many invesigators reported the stabilization of erythrocytes. The results obtained are summarized as follows: 1. A simplified method (slide method) for capsule typing of the organism was developed by adapting Carter's hemagglutination reaction(tube method). Antibody-containing serum can be diluted serially on Boerner's microtest slide with capillary or serological pipetts with a considerable accuracy. The slide reaction can be carried out with case on the slide by adding $0.05m{\ell}$ of antigen-sensitized erythrocytes suspension diluted to one percent on $0.05m{\ell}$ of serially diluted antibody-containing sera, and the final result can be read after 60 minutes at the room temperature ($15^{\circ}C$). 2. It is difficult to determine superiority of inferiority between the slide method and the tube method on the pattern of the reaction of hemagglutination. 3. The pH range of 6.6 to 8.3 is optimal for the slide hemagglutination reaction. 4. The antigen-sensitization against erythrocytes at $37^{\circ}C$ is optimal for the slide hemagglutination. 5. Both the doses and concentration of antigen do not influence the antigen-adsorbing capacity of erythrocytes. 6. The reduction of antigen-sensitizing hours does not influence the antigen-adsorbing capacity of erythrocytes even 30 minutes. 7. The tannic acid treatment against formalinized and non-formalinized erythrocytes showed no effect on the reaction of hemagglutination. 8. The erythrocytes preserved at $4^{\circ}C$ in the ACD solution do not decrease the reactivity on the reaction of hemagglutination for 60 days, while they begin slight hemolysis 30 days after preserving. 9. The stable preparation of erythrocytes can be obtained by treating the cells at $37^{\circ}C$ for 20 hours with from 4 to 8 percent of formalin in saline or buffer. These cells can be preserved at $4^{\circ}C$ for more than 8 months experimented without hemolysis. With low concentration of formalin, the cells were not sufficiently stabilized resulting in the hemolysis after short period of preservation at $4^{\circ}C$. 10. The erythrocytes treated with 16 percent of formalin remain constantly or increase the reactivity for the reaction of hemagglutination. On the contrary, the cells treated with I to 8 percent of formalin decrease the reactivity. 11. There is no difference between nontreated fresh erythrocytes and the erythrocytes preserved in the ACD solution on the reactivity against the hemagglutination, and the erythrocytes treated with 16 percent of formalin showed the reactivity of higher level than that of the above two kinds of erythrocytes. 12. There is no difference between the saline and the isotonic buffer solution on the reaction of hemagglutination.

• 지질공학
• /
• 제17권2호
• /
• pp.289-297
• /
• 2007

매년 강우로 인해 발생되는 사면파괴는 많은 재산피해와 인명피해를 발생시키고 있다. 사면재해로부터의 피해저감을 위해 인간의 생활권과 인접한 사면에 대한 지속적인 관리를 통해 이들의 안정성 검토와 보강 대책이 요구된다. 연구지역은 편마암으로 이루어진 암반사면으로써 단층작용으로 인해 대규모 절리군이 형성되어 있는 풍화암 내지 연암의 풍화 특성을 보여준다. 조사사면을 자연사면과 절취사면으로 구분하여 현장자료를 검토한 결과, 자연사면에서는 주 절리군이 형성된 4개 지점에서 평면파괴와 쐐기파괴 가능성이 우세하였으며, 절취사면의 경우 8개 지점에서 쐐기파괴 발생 가능성이 높게 나타났다. 또한 SLIDE 2D에 적용해 이들 사면의 최소안전율에 대한 수치해석 결과에서는 자연사면보다 절취사면의 안정성이 비교적 취약한 것으로 분석되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.91.1-91
• /
• 2002

1. Introduction Present study presents the basic concept of a Solid Freeform Fabrication System using a rapid prototyping procedure and optimal control for a transferring and accumulating system. And it developed a novel rapid prototyping process that can use ceramic or metal as well as polymer as a basic material. 2. Solid Freeform Fabrication System 2.1 Basic Theory A 3D CAD data of the model is converted to the 2D cross-section data of the slides. A ceramic or metal tape of thickness 0.5-1.5mm is cut by a laser beam with the cross-section data of the slide. A 3D model was obtained by transferring and accumulating the slides. The final product is manufactured by sin...

• 전기의세계
• /
• 제22권3호
• /
• pp.79-80
• /
• 1973

This is the abstract of lecture on Electro-optic characteristics of D-KDP crystal and its application for high speed shutter made by Dr. Naomi Furuya; The professor of Yamanashi University in Kofu Japan on March 31, 1973 for KEEI in the auditorium of Korea Electric Company. His lecture is listened by KEEI members that KDP Z-cut crystal can be utilized as a high speed shutter of 10$^{-6}$ second, combining special camera and 2-3KV electrical impulse generator and also recording slide photographs on tungoten lamp crystal voltage and melting fuse phenomena due to over-current taken by this special equipment had been demonstrated.