• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.3 s.18
• /
• pp.30-37
• /
• 2004

For a proper operation of portable air defense IR terminal homing missile to the rapid intruding target, the boresight of an IR seeker of the missile should be accurately aligned with the gunner's aiming sight. Before a gunner fires the missile, he tries to keep the target within the circle of ASU ensuring the seeker to lock on the target correctly. In this paper, using an electrical seeker caging loop and IR detector signal characteristics, a precise aligning method between the seeker boresight and the LOS(Line of Sight) of ASU(Aiming Sight Unit) was studied. Although every seeker has slightly different SLA (Signal of Look Angle) output, we can get negligible alignment error through a fine tuning method of electrical caging signal. This alignment procedure was also adopted in K-PSAM system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.834-840
• /
• 2001

A real time multibody vehicle dynamics model has been developed and implemented using a subsystem synthesis method based on recursive formulation. To verify real time simulation capability the developed model has been applied to HMMWV(High Mobility Multipurpose Wheeled Vehicle) with steering system. For the kinematically driven steering system, the coupled front suspension-steering subsystem can be decoupled into two SLA suspension subsystems, which improves the efficiency of simulation. To investigate theoretical efficiency, operational counting method has been also employed to compare the proposed model with the conventional recursive dynamics model. Various simulations such as unsymmetric bump run, step steering(J-turn) and sine steering input test have been carried out to verify the real time feasibility of the proposed model.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.4
• /
• pp.62-72
• /
• 2015

Interest in three-dimensional (3D) printing processes has grown significantly, and several types have been developed. These 3D printing processes are classified as Selective Laser Sintering (SLS), Stereo-Lithography Apparatus (SLA), and Fused Deposition Modeling (FDM). SLS can be applied to many materials, but because it uses a laser-based material removal process, it is expensive. SLA enables fast and precise manufacturing, but available materials are limited. FDM printing's benefits are its reasonable price and easy accessibility. However, metal printing using FDM can involve technical problems, such as suitable component supply or the thermal expansion of the heating part. Thus, FDM printing primarily uses materials with low melting points, such as acrylonitrile butadiene styrene (ABS) or polylactic acid (PLA) resin. In this study, an FDM process for enabling metal printing is suggested. Particularly, the nozzle and heatsink for this process are focused for stable printing. To design the nozzle and heatsink, multi-physical phenomena, including thermal expansion and heat transfer, had to be considered. Therefore, COMSOL Multiphysics, an FEM analysis program, was used to analyze the maximum temperature, thermal expansion, and principal stress. Finally, its performance was confirmed through an experiment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1245-1258
• /
• 2012

This study is about development of technology for electronic government of S. Korea with cloud computing analysed by the application of scenario planning. As a society of knowledge and information has been developed rapidly, because of changing from web environment to ubiquitous environment, a lot of countries across the world as well as S. Korea for e-Government have a variety of changes with cloud computing service. So this research focused on the strategy consulting of e-Government of S. Korea with development of cloud computing technology analysed by the application of 'scenario planning' as a foresight method. As a result, the future policy for development of cloud computing technology for electronic government of S. Korea is to further spur the development of technology for hard ware and internet data center as SLA(Service Level Agreement) and service provisioning, more improvement of level of technology with soft ware solution as resource virtualization, open API(Application Programming Interface).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.41 no.6
• /
• pp.317-321
• /
• 2015

Objectives: The purpose of this study is to evaluate five-year radiographic follow-up results of the Korean sandblasting with large grit, and acid etching (SLA)-treated implant system. Materials and Methods: The subjects of the study are 54 patients who have been followed-up to date, of the patients who underwent implant surgery from May 1, 2009 to April 30, 2011. In all, 176 implant placements were performed. Radiographs were taken before the first surgery, immediately after the first and second surgeries, immediately and six months after the final prosthesis installation, and every year after that. Bone loss was evaluated by the method suggested by Romanos and Nentwig. Results: A total of 176 implant placements were performed - 122 in men and 54 in women. These patients have been followed-up for an average of 4.9 years. In terms of prosthetic appliances, there were 156 bridges and 20 single prostheses. Nine implants installed in the maxillary molar area, three in the mandibular molar area and two in the maxillary premolar area were included in group M, with bone loss less than 2 mm at the crestal aspect of the implant. Of these, eight implants were single prostheses. In all, six implants failed - four in the mandible and two in the maxilla. All of these failures occurred in single-implant cases. The implant survival rate was 98.1% on the maxilla and 94.3% on the mandible, with an overall survival of 96.6%. Conclusion: Within the limitations of this study, implants with the SLA surface have a very superior survival rate in relatively poor bone environments such as the maxilla.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.7
• /
• pp.123-131
• /
• 2019

In this paper, related studies were investigated by dividing them into cost-benefit analysis, security continuity services, and SW-centric calculations. The case analysis was conducted on A institutions in the United States, Japan and South Korea. Based on this, an improvement model was prepared through comparison with the current system. The SCS(Security Continuity Service) performance evaluation system-based information protection service cost calculation model is proposed. This method applies a service level agreement(SLA) and NIST Cybersecurity framework that are highly effective through cost-effectiveness analysis and calculates consideration based on characteristics, performance criteria, and weights by information protection service. This model can be used as a tool to objectively calculate the cost of information protection services at public institutions. It is also expected that this system can be established by strengthening the current recommended statutory level to the enforceability level, improving the evaluation system of state agencies and public institutions, introducing a verification system of information protection services by national certification bodies, and expanding its scope to all systems.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.225-231
• /
• 2019

Purpose: This study was undertaken to compare fracture and flexural strength of provisional restorative resins fabricated by additive manufacturing, subtractive manufacturing, and conventional direct technique. Materials and methods: Five types of provisional restorative resin made with different methods were investigated: Stereolithography apparatus (SLA) 3D printer (S3Z), two digital light processing (DLP) 3D printer (D3Z, D3P), milling method (MIL), conventional method (CON). For fracture strength test, premolar shaped specimens were prepared by each method and stored in distilled water at $37^{\circ}C$ for 24 hours. Compressive load was measured using a universal testing machine (UTM). For flexural strength test, rectangular bar specimens ($25{\times}2{\times}2mm$) were prepared by each method according to ISO 10477 and flexural strength was measured by UTM. Results: Fracture strengths of the S3Z, D3Z, and D3P groups fabricated by additive manufacturing were not significantly different from those of MIL and CON groups (P>.05/10=.005). On the other hand, the flexural strengths of S3Z, D3P, and MIL groups were significantly higher than that of CON group (P<.05), but the flexural strength of D3Z group was significantly lower than that of CON group (P<.05). Conclusion: Within the limitation of our study, provisional restorative resins made from additive manufacturing showed clinically comparable fracture and flexural strength as those made by subtractive manufacturing and conventional method.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.556-571
• /
• 2004

Statement of problem: Surface texture of the implant is one of the important factors of the implant success, especially in the immediate implant loading. Many methods of the surface treatment of implant have developed and introduced. Purpose : This study was to evaluate the effects of the Ca-P coating implant crystallized the hydroxyapatite on the surface by the removal torque test and the histomorphometric analysis in vivo. Material and methods: 135 screw type implants, 4.0mm in length and 3.75mm in diameter were used in this study. Implants were divided into 3 groups and treated in the different mothods. Group I was not treated, Group II was treated in the SLA method, and Group III was treated in the Ca-P coating with the anodizing method and the hydroxyapatite was crystallized on the surface with the hydrothermal treatment. Firstly, the surface roughness of each group was measured, 45 rabbits were used in this experiment. Two implants were inserted on right tibial metaphysis and one implant was inserted on left side with the alternating order. After the healing periods of 3, 5, and 12 weeks, the rabbits were sacrificed to evaluate the osseointergration by the removal torque test and the histomorphometric analysis. Results : 1. In the analysis for the surface roughness, Group II showed the highest roughness. And Group III showed higher secondly. There was a significant difference one another statistically 2. In the removal torque test, Group III and II were significantly higher than Group I. There was no statistical difference between Group III and Group II. 3. For all Groups, the removal torque values at 12th week were significantly higher than at 3rd and 5th week. 4. In histomorphometric analysis, the bone implant contact rates of Group III and II were higher than that of Group I at 3rd and 5th week. There was a significant difference at 5th week. 5. In histomorphometric analysis, the bone implant contact rate of Group III and II increased from 3rd week to 5th week, but decreased at 12th week. In Group I, the contact rate at 12th week was significantly higher than at 3rd week and 5th week.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.469-471
• /
• 2005

최근 인터넷에서는 인터넷 방송, 화상 회의, VoIP 등 QoS 보장을 요구하는 새로운 응용 서비스들의 출현과 함께 IP QoS의 문제는 인터넷에서 가장 주요한 과제 중 하나로 등장하고 있다. 이러한 QoS의 적용은 가장 상용화 되어 있는 이더넷 망에서도 마찬가지로 적용되어야 하는 문제이다. 또한 사용자들은 SLA(Sonics Level Agreement)내에서 최선의 QoS 요구하게 되었다. QoS 보장을 위해 기존에는 통합 서비스(Integrated Service)나 차별화 서비스(Differentiated Service) 방식만을 사용하였으나 실제 적용하는데 구현상의 여러 문제점이 발견되었고, 대역폭 할당 방식에 있어서도 토큰 버킷(Token Bucket)과 같은 복잡한 방식을 사용하였다. 본 논문에서는 간단하면서 적용하기 쉬운 QoS 보장을 위한 멀티큐에서의 속도 계산(Rate Calculation)방식을 제안하며 OPNET을 통해 제안된 방식을 검증하도록 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.553-556
• /
• 2006

IT 아웃소싱은 기업의 전략적 선택으로 서비스 공급자와 수요자 사이에 SLA를 통해 제공된 서비스를 측정하고 평가 받게 된다. 대표적인 지표인 애플리케이션 가용성은 서비스의 중단 또는 오류없이 사용자에게 시스템을 이용하게 하는 지원능력이며, 애플리케이션 서비스 중단은 비즈니스의 중단을 동반하게 된다. 그런데, 기존의 측정방법은 중단시간을 모두 일괄적으로 평가하여 측정된 서비스 수준의 신뢰성이 하락하게 되는 문제점이 있다. 따라서, 본 논문에서는 애플리케이션 서비스를 이용하는 사용자의 생산성, 시간 및 시스템별 중요도 가중치를 반영하여 측정된 서비스 수준의 신뢰성을 확보할 수 있는 기법을 제안하였다. 이를 통하여 서비스 수준에 대한 사용자의 체감만족도와 객관성을 높일 수 있었다.