• Korean Journal of Adult Nursing
• /
• v.16 no.1
• /
• pp.27-36
• /
• 2004

Purpose: The purpose of this study was to identify patterns and trends of hardiness studies and to suggest the direction of further research. Method : Forty-seven hardiness studies were collected through internet searching and were reviewed by some criteria. Result : The results showed that hardiness studies have increased rapidly since 1990's. Eighteen studies were thesis' for degrees and others were for non-degree research studies. All studies employed the non-experimental design, particularly correlational studies. In the sampling method, all studies used non-probability sampling. Most commonly used instrument for hardiness measurement was Pollock(1986)'s HRHS. In the majority of research, hardiness was treated both as a composite measure and 3 subscales. Hardiness-related concepts were 27 and classified into 5 categories such as health behavior, stress, adaptation, support, and others. Most common statistical technique was Pearson's correlation coefficient, followed by regression, ANOVA, path analysis. Conclusion : To be utilized as practical nursing knowledge, hardiness studies should be done with more empirical analysis such as experimental research, and Meta-analysis is needed to compare the effect size and significance of composit and 3 subscales of hardiness construct.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.1
• /
• pp.70-76
• /
• 2004

High-temperature cylindrical sodium/stainless-steel heat pipes were manufactured and tested for transient as well as steady states. Total length of the heat pipe was 1 m and the diameter was 25.4 mm. Screen meshes of 3 different sizes were used to estimate the effect of mesh size on the thermal performance of the heat pipe. The minimum thermal resistance achieved was as low as 0.02$^{\circ}C$/W for the maximum thormal load of 2 ㎾. The average heat transfer coefficient in the evaporator was about 2,000 ㎾/$m^2$K and those in the condenser region were up to 5 times higher.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2004.11a
• /
• pp.5-9
• /
• 2004

Garlic industries in Korea faced with a increasing difficulty because of the pressure of garlic importation from China is ever increasing than before. Therefore this study was conducted to produce low-cost garlics by mechanized cultivation and the results are as follows. A. By applying machinery(stem cutter and size separator, seeder, harvester) the labor was saved over 70% compare with the conventional cultivation B. Growth characteristics and yield showed no difference in mechanized and conventional cultivation of northern-type garlic. C. When scales were sown by seeder, the sowing-depth varied between 3 to 6cm and the rate of 2-plants emergence in one hole was 14.5%.

• Journal of Information Technology Services
• /
• v.3 no.1
• /
• pp.43-61
• /
• 2004

Recently It becomes a rapidly growing concern to find effective ways of managing IS development projects as the projects increase in many organization. This paper focuses on developing an integrative management framework for IS development project in contingent perspective. The framework is based upon contingent relationship between management dimensions of IS development project and the characteristics of the task replaced or supported by an IS. Management dimensions of IS development consist of mode, content and process. Task characteristics which are considered as contingent variables include project size, unstructuredness level, hierarchical level, interdependence level and system innovativeness level. The data used for validating this conceptual framework are collected from 119 IS development projects in 70 Korean business organizations. One-way ANOVA and T-test are employed to test the hypotheses.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.2
• /
• pp.135-141
• /
• 2004

The present paper concerns a smoke movement in a tunnel fire with a vertical shaft. The model tunnel measured 13.4m long, 0.4m wide and 0.4m high. The cross section is 1： 20 of a full scale tunnel. Ethanol was used as a fuel. The fire size in model tests varied from 1.35 kW to 13.37 kW, which corresponds to full scale fires of 2.41 to 23.91 MW. Smoke front velocity and temperatrue were decreased due to the vertical shaft install. Temperature was reduced maximum about 2$0^{\circ}C$ at ceiling and about 23$^{\circ}C$ at vertical position. CO concentration was reduced as the vent width widened. When vent width was more than 15 cm, CO concentration was not reached 100 ppm. Descent degree of the smoke layer was confirmed through the visualization.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.47-51
• /
• 2004

Facility layout for enterprise's competitive power strengthening and construction of offensive manufacture line and direction presentation for design of production management system that is new by operation improvement according to S company. In enterprise in JIT(Just in Time) system of leading persons affecting in productions among a lot of habitat factor analyze. It is that through equipment Layout among those factors enterprise my problem improve and serves enterprise's absolute ability cultivation. Even if it is JIT production main point that affect to apply the modular production to productive system among at equipment Layout, lot size, bottleneck session etc. worker's multi-function anger, change of demand factor and productive capacity add. 'S' Through enterprise's example, I wish to establish Korean medium and small enterprises' manufacturing industry style equipment Layout model by taken place effect interpretation.

• Fashion & Textile Research Journal
• /
• v.17 no.3
• /
• pp.447-461
• /
• 2015

The purpose of this study is to develop a torso pattern that is highly representative for the proper body shape of women in their thirties. Size data of the women with age of 30 through 39 from the database of Size Korea 2004 were used for the study. In order to develop a master pattern which will be used as the benchmark for grading of research group, 4 existing torso block drafting methods were compared based on the data gathered and the block with the highest evaluation score was utilized as a reference point. For the analysis, data was divided into four types, only the data of 138 subjects which were evaluated at least by four or more experts as valid were used for the study. The major results can be summarized as follow. The women of bust girth of 91cm and height of 160cm which was turned out to be representative type of research group were used as standard measurement for the purpose of reflecting not only curve length of the 3D analysis measurement but also the difference between front and back thickness to the pattern. Dart locations were set based on front and back torso ease, shoulder area revisions, front sagging length 1.5cm and cross section crevice length analysis. According to the experts' appearance evaluation of the pattern was found to be better than the control pattern which was regarded as the best among 4 patterns created based on existing torso block drafting methods.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.3 s.162
• /
• pp.463-474
• /
• 2007

With rapid expansion in e-retailing of apparel business, personalized fitting model service shows the possibility as the differentiated marketing strategy in cyber shopping. According as necessity of personalized fitting model construction rises, it is tried personalized fitting model creation in several fields such as computer engineering, mechanical engineering, information engineering. But, because existent study was concentrated only on human body modeling, it does not reflect average morphological characteristics of human body properly. In this study, we wish to examine if morphing is fit for expressing characteristic of average human body shape and suggest desirable morphing. We used 3-D scan data of 254 Korean middle aged men collected by Size Korea 2004. The result of this study are as follows: Lower body types were categorized by height hip girth and lower drop(hip girth-navel girth) which were main factors of lower body shape. Then each factor was divided into 3 groups respectively, 30% in the middle, over 30%, under 30%. In 27 groups, the group which belonged to 30% in the middle of height, 30% in the middle of hip girth, 30% in the middle of lower drop was selected as a representative group. We tested geometrical figure by differ volume, tilt, position of point. And we created a representative type of men's lower bodies by morphing the representative group and analyzed it's horizontal, vertical sections. A representative type which was created by morphing reflected a real body and changed realistically at the part of hip, crotch, calf muscle and so on. A cross sections of a representative type were similar to average cross sections of the representative group in size and shape. So it was proved that morphing was successful.

• Journal of Fashion Business
• /
• v.12 no.2
• /
• pp.87-99
• /
• 2008

This study aims to classify lower trunk body types of Chinese men in their middle age (30s and 40s) and suggest the standard for them to design slacks pattern. Mollison's relation deviations were used to analyze the direct measurement items in this research compared to those of Size Korea 2004. Though Korean middle-aged men were higher in most items than Chinese counterparts, all items except mid-thigh circumference and side hip length were merely within the range of ${\pm}1\sigma$. According to the results of size classification by absolute values, factor analysis extracted to 2 factors(horizontal size of lower body and vertical size of lower body), and cluster analysis brought about 3 types(type1: tall and thin trunk (36.9%), type 2 : normal height and thick trunk(45.5%), and type 3 : short and normal trunk(17.6%) with some significant differences among them. Also, the results of shape classification by index values, they were extracted 4 factors (waist-hip flatness, waist-hip cross section, vertical waist-groin and hip-surface length) by factor analysis and revealed 3 types(type 1: different waist-hip width, thick, long waist, long upper hip, and short hip-surface length(27.8%), type 2 : different waist-hip width, flat, short upper hip, high hip and groin, and average hip-surface length(29.4%), and type 3: small waist-hip width, thick, average upper hip, and short hip-surface length (42.8%)) with significant differences among them by cluster analysis. The results of standard body types by shape-size combination, 19subjects(10.16%) under these values are regarded as standard body types. Significance was not seen in all items in the t-test results between the total group and the standard group. The latter had lower variation coefficients and smaller individual differences than the former. However, in-depth research is required for generalization since this research is limited to a small number of subjects in Ningbo of Zhejiang.

• The Korean Journal of Applied Statistics
• /
• v.20 no.2
• /
• pp.245-255
• /
• 2007

In playing Baduk, Black plays first and, thus, can control the pace of a game. Usually a player with black stones plays conservatively to maintain the advantage of playing first. The purpose of dum is to compensate for Black having the first move. Currently, 6.5-point dum is applied in Korea and Japan, while 8-point dum is applied in Taiwan and China. In this study we investigated whether the current size of dum(6.5 points) is optimal, by statistically analyzing and comparing the advantage of taking Black across two data sets with different dun rules. Under the 5.5-point handicap, Blacks won significantly more games than Whites, revealing the advantage of playing first. However, with 6.5-point dum, Black's advantage of playing first was not significant. In Conclusion, implications and future research areas are discussed.