• 제목/요약/키워드: SIZE KOREA 2004

검색결과 1,145건 처리시간 0.037초

Fruit Soft Rot of Sweet Persimmon Caused by Mucor piriformis in Korea

  • Kwon, Jin-Hyeuk;Ahn, Gwang-Hwan;Park, Chang-Seuk
    • Mycobiology
    • /
    • 제32권2호
    • /
    • pp.98-101
    • /
    • 2004
  • A fruit soft rot caused by Mucor piriformis occurred on sweet persimmon storages in Jinju, Changwon and Gimhae, Gyeongnam province, Korea, 2003. The disease infection usually started from wounding after cracking of fruits. At first, the lesions started with water soaked and rapidly softened and diseased lesion gradually expanded. Colonies on potato dextrose agar at $20^{\circ}C$ were whitish to olivaceous-buff Sporangia were globose, black and $96{\sim}153{\mu}m$ in size. Sporangiophores were $26{\sim}42{\mu}m$ in width. Sporangiospores were ellipsoid and $5.8{\sim}10.6{\times}4.3{\sim}7.6{\mu}m$ in size. Columella was obovoid, cylindrical-ellipsoidal, pyriform, subglobose and $80{\sim}125{\mu}m$ in size. Optimal temperature for mycelial growth was $20^{\circ}C$ on PDA. The causal organism was identified as M. piriformis. This is the first report of fruit soft rot on sweet persimmon caused by M. piriformis in Korea.

주기적으로 분리된 광도파로로 구성된 모드 크기 변환기의 설계 및 분석 (Design and analysis of a mode size converter composed of periodically segmented taper waveguide)

  • 박보근;정영철
    • 한국광학회지
    • /
    • 제15권1호
    • /
    • pp.22-27
    • /
    • 2004
  • 본 논문에서는 광도파로와 광섬유사이에서 광손실을 줄이기 위한 모드 크기 변환기를 설계하였다. 설계된 모드 크기 변환기는 주기적으로 분리된 테이퍼 광도파로로 구성된 모드 크기 변환기이며, 공정상의 적용이 용이한 수평 테이퍼 구조를 선택하였다. 높이와 폭이 3$\mu\textrm{m}$${\times}$3$\mu\textrm{m}$이며 1.5%실리카 광도파로의 경우 파장이 1550nm 파장에서 최적의 모드 크기 변환기 설계 파라미터는 테이퍼 영역의 길이가 500$\mu\textrm{m}$이고, 분리된 광도파로의 길이는 5$\mu\textrm{m}$이며, 주기의 Duty-Cycle은 0.95, 광도파로와 광섬유의 접속면에서의 폭은 1.3$\mu\textrm{m}$이였다. 이 때 결합손실은 0.33㏈/point로 광섬유와 광도파로를 직접 연결할 때 보다 1.27 ㏈/point가 감소하였다.

Feeding Habits of Rudarius ercodes in a Zostera marina Bed

  • Kwak Seok Nam;Huh Sung-Hoi
    • Fisheries and Aquatic Sciences
    • /
    • 제7권1호
    • /
    • pp.46-50
    • /
    • 2004
  • Feeding habits of Rudarius ercodes collected from a Zostera marina bed in Jindong Bay, Korea were studied. R. ercodes was a omnivore which consumed mainly gammarid amphipods, polychaetes and eelgrass (z. marina). Its diets also included a small amount of copepods, urochordates and caprellid amphipods. R. ercodes showed ontogenetic changes in feeding habits. Small individuals less than 2cm SL fed mainly on copepods, however, gammarid amphipods and polychaetes were heavily selected with increasing fish size. The consumption of eelgrass by R. ercodes was $10-20\%$ all size classes. The dietary breadth of R. ercodes were varied with fish size

IT제조업의 총요소생산성 추정 및 결정요인 분석 (A Study on Measurement of TFP and Determinant factor)

  • 이영수;김정언;정현준
    • 한국산업정보학회논문지
    • /
    • 제13권1호
    • /
    • pp.76-86
    • /
    • 2008
  • 본 연구는 IT제조업 사업체 규모별 총요소생산성을 추정하고, 총요소생산성 결정요인을 분석한다. 분석 자료로는 $1990{\sim}2004$년 기간의 시계열 자료와 4개 그룹으로 구분된 사업체 규모의 횡단면 자료를 결합한 패널자료 등을 사용하였다. $1991{\sim}1997$년 총요소생산성 증가율은 사업체 규모에 상관없이 정(+)의 값을 보였으나, $1998{\sim}2004$년에는 300인 이상 사업체를 제외하고는 음(-)의 값으로 전환되었다. IT제조업의 총요소생산성 결정변수로 거시변수와 정책변수를 고려하였는데 전체 사업체를 대상으로 분석한 결과, 매출액 증가율은 7개 모형 모두에서 유의하게 정(+)의 값을 나타내 실행에 의한 학습 대량생산 등 규모의 경제 효과가 존재함을 나타냈다. 하지만 IT자본스톡, 정책금융지원 개방도 등 변수는 일부 모형에서만 유의하게 나타나 사업체 규모별로 총요소생산성에 미치는 효과가 다를 여지를 남겼다. 이에 사업체 규모별 총요소생산성 증가율 결정요인 분석을 한 결과 정책금융지원과 개방도가 총요소생산성 증가율에 정(+)의 효과를 가지고, 사업체 규모가 클수록 매출액 증가로 인한 비용절감, 표준화 등 규모의 경제 효과를 보는 것으로 나타났다. 또한 300인 이상 대규모 사업체의 경우 IT자본스톡이 생산성 향상에 도움을 주는 것으로 분석되었다.

  • PDF

배의 크기 단위에 관한 역사지리학적 연구 (A Geo-Historical Research on the Unit of the Ship′s Size)

  • 김성준;허일;최운봉
    • 한국항해항만학회지
    • /
    • 제28권5호
    • /
    • pp.339-345
    • /
    • 2004
  • 오늘날 배의 크기를 나타내는 단위로 톤(ton)을 사용하고 있다. 톤이란 용어가 배의 크기를 나타내는 일반명사가 되기 이전에 세계 여러 지역에서는 고유한 단위로 배의 크기를 나타내었다. 이를테면 서유럽에서는 포도주 통인 ton, 북유럽에서는 곡량 단위인 last, 제노바에서 는 cantara, 베네치아에서는 milliaria, 나폴리에서는 carra를 각각 사용했다. 동양권에서는 가장 중요한 화물이 쌀이었기 때문에 한중일 모두 미량 단위인 을 사용하여 배의 크기를 나타냈다. 특히 중국인들은 싸라는 독특한 단위를 사용하기도 하였다. 이처럼 각 지역과 시기에 따라 다른 단위를 사용하여 배의 크기를 나타냈으나, 19세기 중반 Moorsom 방식에 의한 톤수 측정법이 도입되고, 이것이 전세계적으로 보급됨에 따라 톤이 배의 크기를 나타내는 단위로 정착하게 되었다.

연소합성법에 의한 발열성 다공질 MoSi2계 재료의 제조 (Fabrication of Porous MoSi2 material for Heating Element through Self-propagating High Temperature Synthesis Process)

  • 송인혁;윤중열;김해두
    • 한국세라믹학회지
    • /
    • 제41권1호
    • /
    • pp.62-68
    • /
    • 2004
  • 본 연구에서는 SHS 공정에 의하여 기공의 크기를 조절함으로서 전기저항 발열 특성을 가지는 다공성 $MoSi_2$를 제조하는 공정에 관하여 연구하였다. 결함이 억제된 다공질 재료를 제조하기 위하여 Si 함량 변화 및 예열 공정을 실시하였으며, 성형체 제조에 사용되는 Mo 분말의 크기 변화에 따른 가공 형성 거동에 대하여 연구하였다. 실험 결과 합성된 $MoSi_2$ 입자의 크기는 Mo 입자의 크기와는 관계없이 연소 합성시 발열되는 발열양에 의해 좌우되었으며, 기공의 크기는 Mo 입자의 크기에 따라 결정되었다. 또한 가공 경사 $MoSi_2$ 다공질 재료를 만들기 위하여 150-300${\mu}m$ Mo 분말과 4-5${\mu}m$ Mo 분말을 단계별로 5층으로 혼합하여 합성한 결과 거시적으로 순차적인 기공 크기 분포를 나타내었으며, 이를 통하여 포집 효율등이 우수한 다공성 발열체 재료의 제조가 가능하였다.

고강도 철근콘크리트 연속 깊은 보의 크기효과에 대한 실험적 연구 (An Experimental Study on the Size Effect of Reinforced Concrete Continuous Deep Beams)

  • 양근혁;정헌수
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
    • /
    • pp.385-388
    • /
    • 2004
  • To understand of size effect in high-strength reinforced concrete continuous deep beams, 6 specimens with section overall depth ranging from 400 to 720mm were tested. Test results indicated that the size effect of continuous deep beams is slightly greater than in simply supported deep beams.

  • PDF

굵은골재 최대치수별 굵은골재/잔골재 용적비에 따른 콘크리트의 특성에 관한 실험적 연구 (An Experimental Study on the Properties of Concrete according to G/S ratio classified by Maximum Size of Coarse Aggregate)

  • 김덕현;이상수;송하영;김을용
    • 한국건축시공학회지
    • /
    • 제4권2호
    • /
    • pp.97-103
    • /
    • 2004
  • In this study, the experiment was carried out to investigate and analyze the influence of coarse aggregate's mix ratio and maximum size on the properties of concrete. The main experimental variables were water/cement ratio 45% and 65%, coarse aggregate/fine aggregate ratio 90%, 130% and 170%, maximum size of coarse aggregate 15mm, 25mm and 40mm. According to the test results, the principal conclusions are summarized as follows. 1) The slump and flow of fresh concrete were found to be higher in the order of G/S ratio 170%, 130%, 90%, also in the order of maximum size 40mm, 25mm, 15mm. 2) The compressive strength of hardened concrete were found to be higher in the order of G/S ratio 170%, 130%, 90%, also in the order of maximum size 15mm, 25mm, 40mm.

Gaussian 액적 크기 분포 함수를 이용한 분무형 화재 현상 해석 (Analysis of Sodium Spray Fire Using Gaussian Droplet Size Distribution)

  • 김병호;한도희;서숭혁
    • 한국수소및신에너지학회논문집
    • /
    • 제15권1호
    • /
    • pp.72-81
    • /
    • 2004
  • Study on the analysis of sodium spray fire using Gaussian drop size distribution, which redistributes a droplet spectrum with given mean diameter if its size classes with critical diameter(D>8mm) occur, was carried out. In this case, the oversized droplets were reduced to a stable diameter. Results calculated by the code using Gaussian drop size distribution were in better agreement with AI experimental results than those of NACOM and SPRAY code. The effect of variance on pressure in the test cell appeared greatly by introducing Gaussian function, which could represent various sodium droplet size distribution. The increase of the variance with mean droplet size resulted had an important effect upon the pressure in the test cell.

팬티스타킹의 치수규격에 관한 연구 (A Study on the Size Designation of Pantyhose)

  • 이준옥;성화경;최혜선;이경화
    • 한국의류학회지
    • /
    • 제30권5호
    • /
    • pp.779-787
    • /
    • 2006
  • Pantyhose is a close-fitting garment. Consumers are highly sensitive to any progress done in fitting their lower body and increasing comfort. However, pantyhose manufactured in Korea are only one-sized. The purpose of this study is to suggest the size designation of pantyhose, using new human body measurement data which were gained from the Year 2004 SIZE KOREA project. For the purpose of this study, the ISO standards and JIS standards were reviewed and questionnaire was carried out to manufacturers and distribution companies. The results are as follows: First, for a difference with size standards established in 2002, applicable age range was expanded from 15 to 70 year-old women to entirely include persons who wear panty hose. Secondly considering the actual condition that panty hose is producing in single size in most companies due to its elasticity of material, number of size was reduced from five to four. Thirdly basic parts of body which were applied to panty hose are height and hip girth. And size of panty hose is decided by a chart which is composed of height-axis and hip-axis.