• Journal of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.97-103
• /
• 2002

We have mapped 1 $deg^2$ region toward a high latitude cloud MBM 40 in the J = 1 - 0 transition of $^{12}CO$ and $^{13}CO$, using the 3 mm SIS receiver on the 14 m telescope at Taeduk Radio Astronomy Observatory. We used a high resolution autocorrelator to resolve extremely narrow CO linewidths of the molecular gas. Though the linewidth of the molecular gas is very narrow (FWHP < 1 km $s^{-1}$ ), it is found that there is an evident velocity difference between the middle upper part and the lower part of the cloud. Their spectra for both of $^{12}CO$ and $^{13}CO$ show blue wings, and the position-velocity map shows clear velocity difference of 0.4 km $s^{-1}$ between two parts. The mean velocity of the cloud is 3.1 km $s^{-1}$. It is also found that the linewidths at the blueshifted region are broader than those of the rest of the cloud. We confirmed that the visual extinction is less than 3 magnitude, and the molecular gas is translucent. We discussed three mass estimates, and took a mass of 17 solar masses from CO integrated intensity using a conversion factor $2.3 {\times} 10^{20} cm^{-2} (K\;km s^{-1})^{-1}$. Spatial coincidence and close morphological similarity is found between the CO emission and dust far-infrared (FIR) emission. The ratio between the 100 f.Lm intensity and CO integrated intensity of MBM 40 is 0.7 (MJy/sr)/(K km $s^{-1}$), which is larger than those of dark clouds, but much smaller than those of GMCs. The low ratio found for MBM 40 probably results from the absence of internal heating sources, or significant nearby external heating sources.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1894-1903
• /
• 2015

The purpose of this study was to examine the effects of group task-oriented circuit training (TOCT) based on motor learning applied in conjunction with physical and occupational therapy on functional activity, activities of daily living (ADLs), and quality of life in individuals with chronic stroke. Six chronic stroke patients participated for a duration of 31 weeks. Treatment outcomes were assessed via Chedoke-McMaster Stroke Assessment, the Berg Balance Scale, the Assessment of Motor and Process Skill (AMPS), and the Stroke Impact Scale pre- and post-intervention. The participants exhibited significant improvements in impairment, static and dynamic balance, and mood and emotion after group TOCT. The results of AMPS indicated an improvement in the motor area in 3 of the subjects. In the process area, 4 of the subjects exhibited improvement. The results of this study suggest that TOCT is beneficial to physical functions for chronic hemiparetic stroke patients in community-dwelling.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 1999.02a
• /
• pp.3-9
• /
• 1999

The grain morphology, the changes in morphology and Jc with the thermo-mechanical treatment (TMT) history, the field dependence of Jc and the nature of intergranular bonding were studied in $T_{10.8}$$Pb_{.2}$$Bi_{0.2}$$Sr_{1.8}$$Ba_{0.2}$$Ca_{2.2}$$Cu_{3}$$O_{z}$/Ag tapes. As a result, incorporation of intermediate rolling during the final heat-treatment resulted in of plate-like TI-1223 grains, and thus enhanced Jc. Jc's near 2.5$\times$104 A/cm2 at 77 K and 0 T were obtained in just rolled tapes with an excellent reproducibility. The high Jc's seem to grain-connectivity easy recovery of excellent grain-connectivity during final heat-treatment after inter -mediate rolling, probably due to retarded T1 evaporation and excessive Ca content in the present composition. The strong field dependence of Jc even in low fields, however, indicated that there still existed significant weak-links and the degree of directional grain-alignment was far from the desired one. The intergranular binding in the tapes seemed to be mainly dominated by SIS junctions.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.3
• /
• pp.81-89
• /
• 2001

The purpose of this research is to provide for some useful data for computer-related courses of the landscape science, assuming that computers are being and should be used more and more in landscape architecture and therefore, that landscape science students need to respond positively to such a trend. For this purpose, landscape architecture studios and their landscape architects were surveyed for their computer and its program uses as well as their satisfaction with the utility of computer for their landscape works. The results of this research are as follows; 1) 10.7% of the landscape architects surveyed answered that they had learned about their necessary softwares at school, while 61.6% of the studios surveyed were less satisfied with their employees' poor computing ability. Such findings suggest a lack of computer-related courses in landscape science and therefore, that more computer-related courses should be introduced for landscape science students together with the necessary software education. 2) Too few landscape softwares are being used by the landscape architecture studios; such softwares as AutoCAD, Photoshop, 3D Max, Excel, PowerPoint and 한글 account for more than 90% of the landscape architecture softwares being used currently. Quite naturally, landscape students need to be trained on these softwares above all. 3) It was found hat he area of work using the computer most was ˝design works˝(84.5%), followed by ˝documentation˝(83.8%), ˝image editing˝(75.1%), ˝cost calculation˝(68.2%), ˝presentation˝(68.1%), ˝analysis˝(37.8%) and ˝rendering˝(35%). It was regretable to discover that such areas requiring more computing work as ˝analysis˝ and ˝rendering˝ were still worked manually. So it sis deemed necessary for landscape science courses to enhance their computer education of such areas first of all.

• Journal of Plant Biotechnology
• /
• v.5 no.1
• /
• pp.43-49
• /
• 2003

Resistant cell lines to azetidine-2-carboxylic acid (AZCA) were selected through rice embryo culture after mutagenic treatment of callus irradiated with 30,50,70,90 and 120 Gy. The optimum AZCA concentration for the selection of resistant cell lines was 3 or 4 mM AZCA considering $LD_{50}$ and the fresh weight of callus. Survival rate of the AZCA resistant callus showed remarkable increase in the callus irradiated with 50 and 70 Gy. Regeneration rate of the AZCA resistant callus was much lower on the whole. Ninety and 120 Gy increased the regeneration rate for calli selected from 3 and 4 mM AZCA, respectively. Based on fresh weight, survival rate and regeneration for selection of the AZCA resistant cell line, 50-90 Gy was considered as the optimum range of gamma irradiation. Irradiated calli selected from AZCA were more tolerant to NaCl than those from non-irradiated calli. It suggests that elevated resistance to osmotic stress resulted from mutagenic treatment. The level of free proline content in the AZCA resistant cell line was increased up to 3.5 times compared with that in the control. Proline content in the regenerant derived from the AZCA resistant cell line also increased to 1.7 times that from the control plants regenerated from callus grown in AZCA free medium. Selection of proline overproducing cell lines by in vitro mutagenesis was successful and seems to be useful for improvement of stress tolerance in this crop.

• Fire Science and Engineering
• /
• v.17 no.4
• /
• pp.76-85
• /
• 2003

In this study, we write down the definitions, their causes and the techniques of analysis as a theoretical consideration of common cause failures, and investigate the limitation and the importance of the common cause failures by applying to the analysis on the fire protection as a representative safety facility. As you can know in the reliability analysis, most impressive cause is the malfunctions of pumping operations; especially the common cause failure of two pumps is dominant. In other words, it is possible to assess system-reliability as twice as actual without CCF From these, CCF is extraordinarily important and the results are highly dependent on the CCF factor. And although it would increase with multiple installations, the reliability are not defined as linear with those multiplications. In addition, the differences in results due to the models for analysis are not significant, whereas the various sources of data produce highly different results. Therefore, we conclude that the reliabilities are dependent on the quality of the usable data much better than the variety of models. As a result, the basic and engineering device for the preventions of CCF of the multiple facilities is to design it as reliably as to design the fire-water pump. That is to say, we must assess those reliabilities using PFD whether they are appropriate to SIL (Safety Integrity Level) which is required for the reliability in SIS (Safety Instrumented System). The result of the analysis on the reliability of the fire-water supply with CCF shows that PFD is 3.80E-3, so that it cannot be said to be designed as safely as in the level of SIL5. However, without CCF, PFD is 1.82E-3 which means that they are designed as unsafely as before.

• Journal of the Korean Geosynthetics Society
• /
• v.5 no.1
• /
• pp.15-23
• /
• 2006

Sand Compaction Pile and Stone Column method have been used in widely during several decades as a technique to reinforce soft soils and increasing ultimate bearing capacity, accelerate consolidation settlement of the foundation ground. Stone column method, making a compaction pile using crushed stone, is a soft ground improvement method. However, stone column method is difficult to apply to the ground which is not mobilized enough lateral confine pressure because no bulging failure resistance. Hence, in present study, development the geogrid reinforced stone column system for settlement reduction and wide range of application of stone columns. To develop this system, triaxial compression tests were conducted for evaluation which is about behavior characteristics of stone column on replacement rate and confine pressure. Then, 3-dimensional numerical analysis were evaluated for application of the GRSC (geogrid reinforced stone column) system as evaluate behavior characteristics and settlement reduction effect of stone column reinforced by geogrid on types and reinforcing depth change of geogrid.

• Journal of The Korean Astronomical Society
• /
• v.47 no.6
• /
• pp.319-325
• /
• 2014

We map two molecular clouds located in the exact anticenter region emitting in the (J = 1-0) transition of $^{12}CO$ and $^{13}CO$ using the 3-mm SIS mixer receiver on the 14-m radio telescope at Taeduk Radio Astronomy Observatory. The target clouds with anomalous velocities of $V_{LSR}{\sim}-20km\;s^{-1}$ are distinguished from other clouds in this direction. In addition, they are located in the interarm region between the Orion Arm and the Perseus Arm. Sizes of the clouds are estimated to be about 8.6 and 10.8 pc, respectively. The total mass is estimated to be about $4{\times}10^3$ $M_{\odot}$ using CO luminosity of the clouds. Several cores are detected, but no sign of star formation is found according to the IRAS point sources. Their larger linewidths, anomalous velocities, and their location at the interarm region make these clouds more distinguished, though their physical properties are similar to the dark clouds in the solar neighborhood in terms of mass and size.

• Journal of Power System Engineering
• /
• v.13 no.3
• /
• pp.33-39
• /
• 2009

The aim of this study is to analyze the welds characteristics of the 205 stainless steel pipe for application of street pole material. The welds corrosion behavior of STS 205 pipe in 0.1 N sulphuric acid solution and 5% NaCl solution at room temperature was studied using both salt spray test and potentiodynamic polarization experiment. The morphology and components of corrosion products on surface of STS 205 pipe welds were investigated using SEM/EDX. The tensile strength and yield strength values of STS 205 plate were 715 MPa and 369 MPa respectively. The microvickers hardness values of STS 205 pipe welds were slightly increased than that of STS 304 pipe welds. Corrosion current density($I_{corr.}$) and critical current density($I_{crit.}$) values of STS 205 pipe welds in 3.5% NaCl solution were $1.89{\times}10^{-6}$ $A/cm^2$ and $15.8{\times}10 ^{-6}$ $A/cm^2$. The corrosion resistance of SIS 205 pipe welds was similar to its STS 304 pipe welds. The STS 205 and 304 pipe welds passive films were chromium oxide. Especially, the STS 205 pipe welds showed good corrosion resistance in 0.1 N sulphuric acid. This is attributed to the forming of protective chromium oxide on the surface of STS 205 pipe welds.

• The Korean Journal of Mycology
• /
• v.16 no.3
• /
• pp.162-174
• /
• 1988

To separate and quantitate antitumor protein-bound polysaccharides of Coriolus versicolor, the constituents were obtained from the submerged culture of the mycelia(C) and from the extract of the carpophores of the wild fungus(N). The polysaccharides were degraded by methanolysis. The neutral monosaccharides were separated and quantitated by HPLC using microbondapak carbohydrate analysis column, refractive index detection and water-acetonitrile acetic acid elution. The analyses of these constituents by HPLC showed that the natural constituent(N) consisted of glucose, xylose and mannose, the average amount being 96.44, 2.16 and 1.73%, respectively. The fermentation constituent(C) consisted of mannose, glucose, xylose and galactose, the average amount being 61.30, 14.00, 12.95, and 11.75%, respectively. The analyses of these constituents by an amino acid analyzer showed that both C and N contained 17 amino acids.