• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.01a
• /
• pp.137-138
• /
• 2015

본 논문에서는 연속된 영상에서 다중해상도 에지정보의 차이를 이용하여 이동하는 물체를 탐지하고 계수하는 시스템을 제안한다. 연속적으로 입력되는 영상에 대하여 이산 웨이블릿 연산을 수행하여 다중해상도 에지를 추출하고, 인접한 프레임 사이의 다중해상도 에지 차이를 이용하여 이동물체를 추출한다. 가중치가 부여된 유클리디언 거리를 이용하여 물체를 추적한 다음, 칼만필터를 이용하여 물체 궤적의 위치 정보를 보정한다. 마지막으로, 관심영역에 대한 물체 궤적의 상대적인 위치를 고려하여 이동물체를 계수한다.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.385-393
• /
• 2005

In this paper, we propose a simple algorithm to adaptively adjust the value of dupthresh, the duplicate acknowledgement threshold that triggers the transmission control protocol (TCP) fast retransmission algorithm, to improve the TCP performance in a network environment with persistent packet reordering. Our algorithm uses an exponentially weighted moving average (EWMA) and the mean deviation of the lengths of the reordering events reported by a TCP receiver with the duplicate selective acknowledgement (DSACK) extension to estimate the value of dupthresh. We also apply an adaptive upper bound on dupthresh to avoid the retransmission timeout events. In addition, our algorithm includes a mechanism to exponentially reduce dupthresh when the retransmission timer expires. With these mechanisms, our algorithm is capable of converging to and staying at a near-optimal interval of dupthresh. The simulation results show that our algorithm improves the protocol performance significantly with minimal overheads, achieving a greater throughput and fewer false fast retransmissions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.844-853
• /
• 1998

Natural and forced convection experiments were carried out in order to investigate the effects of channel spacing gap between protrusions and number of rows of protrusion, In natural convection the optimum channel spacing was found to be approximately 20mm regardless of the protrusion gaps. For optimum channel spacing the heat transfer coefficients were converged to an asymptotic value after the fourth row. The heat transfer coefficient for each row approaches to constant values for protrusion gaps larger than 10 mm. An experimental correlation has been suggested by using a modified Rayleigh number based on the dimensionless characteristic length(G/L). In forced convec-tion the heat transfer coefficients were not merged to an asymptote until the fifty row and increases as the channel spacing at the constant Reynolds number decreases.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.3
• /
• pp.389-397
• /
• 1999

Recently the use of Pd catalyst have been continued to expand because of cost avaliabilityand performance advantages. Especially the Pd+Rh catalyst instead of the Pt+Rh catalyst had been used for most of three way catalysts because of the more stringent emission standards and its higher temperature effectiveness. The main purpose of this study is to investigate the design parameter impacts on the Pd+Rh cat-alyst for the automotive exhaust catalysts application. This study was investigated on the catalyst efficiency for the volume and the precious metal loading of the Pd+Rh ceramic monolithic cata-lyst. And experiments concerning the effects of volume and precious metal loading on Pd+Rh three way catalysts were conducted to examined the catalyst light-off temperature and conver-sion efficiency on higher volume demonstrated almost similar performance. But their effects on higher precious metal loading demonstrated considerably better performance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.5
• /
• pp.702-711
• /
• 1998

The characteristics of corrosion resistance for the surface of medium high carbon steels and low alloy steels utilizing as manufacturing the machinery structures and machining tools and treating by plasma/ion nitriding process have been studied in terms of electrochemical polarization behav-iors including corrosion potential(Ecorr) anodic polarization trends and polarization resistance(Rp) The seven base materials showed a clear passivation behavior for the polarization tests in the ASTM standard solution 1N ${H_2){SO_4}$ Although the treated surface by plasma nitriding for the seven test materials showed a significant increase in hardness the treatment gave a detri-mental effect in corrosion resistance. The various characteristics including corrosion potential polarization curves microstructures corrosion current polarization resistance among non-treat-ed nitriding and/or soft-nitriding treated specimens have been investigated and some of the mechanisms discussed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.4 s.44
• /
• pp.457-470
• /
• 1992

Several scholars have discussed the relationship between fine art and fashion in meaning and expression. They have established that fashion and fine art are different branches from the same root, the Zeitgeist (time spirit), and that the Zeitgeist is materialized by various expres-sion techniques. The objective of this paper is to discuss how designers' interpretation of the Zeitgeist is expressed in their work, focusing on the 60's American society and designer Rudi Gernreich. The 60's were the period with revolutionary changes both in society itself and clothing. Rudi is the representative of the 60's designers who is called the most avant-garde and American household designer at the same time. Despite his prominent status as an avant-garde designer and social commentator, however, he has not been discussed in depth in the Korean clothing society. The consistent theme of his work was young and free spirit, and women's liberation which reflected the time he lived in. His successful interpretation of the Zeitgeist of the 60's made him establish the American-look, simple and free to move.

• Microbiology and Biotechnology Letters
• /
• v.22 no.5
• /
• pp.531-537
• /
• 1994

This study was undertaken with objective of optimizing the conditions of fermentation in an aqueous two-phase system which is composed of polyethylene glycol (PEG) 20000 and crude dextran (Dx). The data were obtained and analyzed using the Box-Wilson's experimental design protocol and the response surface methodology. To reach this end a multilinear polynomial regres- sion model was developed, which can be utilized for the purpose of optimizing the extractive fermentation. Optimum conditions for batch fermentation with aqueous two phase system were found to be at 4.2~5.4% PEG/3.2~4.2% Dx range. The composition of the center was 4.8% PEG/ 3.6% Dx. Optimum operating conditions for initial sugar concentration and fermentation time were approximately 160 g/l, and 21~22 hr, respectively. Fermentation in the aqueous two phase system composed of 5% PEG/4% Dx showed increase of 23% in ethanol concentration, of 9.5% in ethanol yield, and of 19% in ethanol productivity as compared to the case of fermentation of neat Jerusalem artichoke juice.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.69-78
• /
• 1997

Main sources of the vibration in gear driving system are transmission error and backlash. Transmission error is the difference of the rotation between driving and driven gear due to tooth deformation and profile error. Vibro-impacts induced by backlash between meshing gears lead to excessive vibration and noise in many geared rotation systems. Nonlinear dynamic characteristics of the gear driving system due to transmi- ssion error and backlash are investigated. Transmission error is calculated for spur gear. Nonlinear equation of motion for the gear driving system is developed with the calculated transmission error and backlash. Numerical analysis of the equation and the experimental results show the existence of meshing frequency, superharmonic compon- ents. Instability of the gear driving motion is found on the basis of Mathieu equation. Rattle vibration due to backlash is also discussed on the basis if nonlinear jump phenomenon.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.10
• /
• pp.2574-2581
• /
• 1993

A Shadow mask in C. R. T. (Cathod Ray Tube) undergoes a temperature increase due to impinging electron beams emitted from guns, and thermal deformation from such temperature rise may cause the electron beams to island on the panel, and thus give rise to depolarization. Hence the analysis of temperature distribution for a shadow mask is an important procedure for designing the shadow mask. In this paper, we are concerned with nonlinear finite element analysis of the temperature distribution on a shadow mask. First of all, we replace shadow mask, containing numerous apertures of a slit type, by an orthotropic shell without apertures, and calculate the apparent thermal conductivities. Because of thermal radiation, which is one of the major heat transfer mechanism for shadow masks, the resulting finite element equation is nonlinear and solved by the Newton method. Finally numerical examples are illustrated for a 21" FST(Full Square Tube) shadow mask, and followed by discussion.sion.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.05
• /
• pp.7-14
• /
• 1993

Nowadays, microspheres are expected to be applied to biomedical areas and many studies are being performed. For biomedical applications, many kinds of microspheres were synthesized by emulsion polymerization, emulsifier-free emu]sion polymerization, and emulsifier-free emulsion polymerization with ionic surface-active comonomers. Further synthesis techniques about microencapsulation and magnetic microspheres are introduced. Among the practical applications of microspheres, some interesting subjects are introduced. These include solid-phase immunoassays, labeling and identification of lymphocyte populations, extracorporeal and hemoperfusion systems, drug delivery systems, and immunomagnetic cell separation. In addition, basic theories, problems and research trends are also introduced.