• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1997년도 추계 학술대회논문집
• /
• pp.23-28
• /
• 1997

A parallel implementation is made of a two-dimensional finite volume model based on the SIMPLER. The solution domain is decomposed into several subdomains and the solution at each subdomain is acquired by parallel use of multiple processors. Communications between processors are accomplished by using the standard MPI and the Cray-specific SHMEM. The parallelization method for the overall solution procedure to the Navier-Stokes equations is described in detail, The parallel implementation is validated on the Cray T3E system for a benchmark problem of natural convection in a sidewall-heated cavity. The parallel performance is assessed and the issues encountered in achieving a high-performance parallel model are elaborated.

• 전자공학회논문지B
• /
• 제33B권11호
• /
• pp.83-96
• /
• 1996

On PR-IV magnetic recording systems, the maximum likelihood sequence detection (MLSD) method is optimum. But it has the problem of the complexity of the structure. The three level detection (TLD) method can be used, which has simpler structure than MLSD, but requires almost twice of power to achieve the same probbility of error as MLSD does. Therefore a new detection method (error controlled detection: ECD) is proposed which has much simpler structure than MLSD and gives much better performance than TLD. The simulation resutls show that the performance of ECD is better than that of TLD by approximaterly 0.5~1.3dB both in linear and nonlinear channels.

• 한국항공우주학회지
• /
• 제33권6호
• /
• pp.15-20
• /
• 2005

타원형 실린더 주위를 흐르는 비정상 점성 유동을 해석하기 위해서 SIMPLER 방법을 사용한 이차원 비압축성 나비어-스??스 유동 해석 프로그램을 개발하였다. 실린더 직경에 대한 두께의 비가 0.6, 0.8, 1.0, 1.2인 실린더 주위의 점성 흐름을 레이놀즈 수 200, 400, 1000인 조건에서 해석하였다. 본 논문은 실린더 두께와 레이놀즈 수가 실린더에 작용하는 양력 및 항력에 미치는 영향을 파악하는데 주 관심을 두었다. 개발된 해석 프로그램의 검증을 위해서 가용한 실험 자료와 수치 해석 자료가 개발된 해석 프로그램의 수치 결과와 비교되었으며, 잘 일치하는 경향을 보여주었다. 본 연구를 통해서 실린더 두께와 레이놀즈수가 항력과 양력의 진동 주기뿐만 아니라 크기나 진폭에 큰 영향을 미치게 됨을 알 수 있었다.

• 한국항공우주학회지
• /
• 제33권12호
• /
• pp.1-8
• /
• 2005

타원형 실린더의 두께와 받음각 및 레이놀즈수가 실린더에 작용하는 항력과 양력에 어떤 영향을 미치는가를 고찰하기 위해서 수치적 연구를 수행하였다. 타원형 실린더 주위를 흐르는 비정상 점성 유동을 해석하기 위하여 SIMPLER 기법을 이용한 2차원 비압축성 Navier-Stokes 유동 해석 프로그램을 개발하였으며, 두께-시위길이 비가 0.2, 0.4, 0.6인 타원형 실린더 형상에 대해서 레이놀즈수가 400, 600인 조건, 그리고 받음각이 10도, 20도, 30도인 조건하에서 유동을 해석하였다. 본 연구를 통해서 실린더 두께 비와 받음각 및 레이놀즈수가 항력과 양력 계수의 시간 평균값 및 진폭의 크기, 그리고 진동 주기에 크게 영향을 미침을 확인할 수 있었다.

• 대한기계학회논문집B
• /
• 제26권10호
• /
• pp.1436-1444
• /
• 2002

A three dimensional numerical model was developed to analyze the mold filling and solidification processes straightforwardly in a casting processes. On the basis of the SIMPLER algorithm, the VOF method and the Equivalent Specific Heat method were adopted to deal with the free surface behavior and the latent heat evolution. The complete model has been validated using exact solutions and experimental results. The importance of three-dimensional effects has been highlighted by comparing the results from the three-dimensional analysis with those given by a two-dimensional analysis.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.926-933
• /
• 1988

본 연구에서는 SIMPLER 알고리즘이 응용된 기존 2차원 타원형 프로그램을 수 정하여 압력값의 절대치가 지배방정식의 경계조건으로 사용될 수 있도록 하였으며 이 를 이용한 계산예로서, 청정실과 유사한 유로에서의 유체 유동을 수치적으로 해석하여 수정된 프로그램의 타당성을 입증하였다.

• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.167-175
• /
• 2006

A parametric study has been accomplished to figure out the effects of elliptic cylinder thickness, angle of attack, and Reynolds number on the unsteady lift and drag forces exerted on the elliptic cylinder. A two-dimensional incompressible Navier-Stokes flow solver is developed based on the SIMPLER method in the body-intrinsic coordinates system to analyze the unsteady viscous flow over elliptic cylinder. Thickness-to-chord ratios of 0.2, 0.4, and 0.6 elliptic cylinders are simulated at different Reynolds numbers of 400 and 600, and angles of attack of $10^{\circ},\;20^{\circ},\;and\;30^{\circ}$. Through this study, it is observed that the elliptic cylinder thickness, angle of attack, and Reynolds number are very important parameters to decide the lift and drag forces. All these parameters also affect significantly the frequencies of the unsteady force oscillations.

• Journal of Mechanical Science and Technology
• /
• 제19권3호
• /
• pp.877-886
• /
• 2005

Two-dimensional incompressible Navier-Stokes equations are solved using SIMPLER method in the intrinsic curvilinear coordinates system to study the unsteady viscous flow physics over two-dimensional ellipses. Unsteady viscous flows over various thickness-to-chord ratios of 0.6, 0.8, 1.0, and 1.2 elliptic cylinders are simulated at different Reynolds numbers of 200, 400, and 1,000. This study is focused on the understanding the effects of Reynolds number and elliptic cylinder thickness on the drag and lift forces. The present numerical solutions are compared with available experimental and numerical results and show a good agreement. Through this study, it is observed that the Reynolds number and the cylinder thickness affect significantly the frequencies of the force oscillations as well as the mean values and the amplitudes of the drag and lift forces.

• Journal of Mechanical Science and Technology
• /
• 제19권7호
• /
• pp.1488-1502
• /
• 2005

A three dimensional model was developed to analyze the mold filling and solidification in the casting processes. The model uses the VOF method for the calculation of the free surface and the modified Equivalent Specific Heat method for the treatment of the latent heat evolution. The solution procedure is based on the SIMPLER algorithm. The complete model has been validated using the exact solutions for phase change heat transfer and the experimental results of broken water column. The three-dimensional model has been applied to the benchmark test and the results were compared to those from experiment, a two-dimensional analysis, and another three dimensional numerical model.

• Korean Journal of Mathematics
• /
• 제5권1호
• /
• pp.91-106
• /
• 1997

The existence and the smoothness of density of random variables which are solutions of the canonical stochastic differential equation can be proved by simpler conditions in the Malliavin-Bismut method.