• 한국주조공학회지
• /
• 제13권4호
• /
• pp.342-349
• /
• 1993

The purpose of this study is to obtain basic information on the particle dispersion, the coefficient of thermal expansion and the thermal conductivity of compocasted Al-xSi-2Cu-1Mg/ySiC(x:6, 12, 18. $y:0{\sim}10wt.%$) composite. With increasing the content of SiC particles, the thermal expension coefficient and the thermal conductivity decrease. The coefficient of thermal expension between 20 and $300^{\circ}C$ is $21.3{\times}10^{-6}/^{\circ}C{\sim}18.0{\times}10^{-6}/^{\circ}C$ for the Al-Si alloys and $18.4{\times}10^{-6}/^{\circ}C{\sim}16.0{\times}10^{-6}/^{\circ}C$ for the composite with 10wt.% SiC. The thermal conductivity at $300^{\circ}C$ is $121{\sim}169W{\cdot}m^{-1}{\cdot}k^{-1}$ for the Al-Si alloys and $114{\sim}159W{\cdot}m^{-1}{\cdot}k^{-1}$ for the composite with 10wt.% SiC.

• Journal of Magnetics
• /
• 제2권1호
• /
• pp.12-15
• /
• 1997

Fe-(3∼6.5wt%) Si alloy powders having a high magnetic induction(Bs) and a low core loss value for high frequency use were obtained by an extractive melt spinning as well as a centrifugal atomization technique. Sintered core rings made by the rapidly solidified Fe-6.5wt% Si powders exhibited the high frequency magnetic properties : megnetic induction(B8) of 1.23 T, coercivity(Hc) of 0.12 Oe, relative permeability(${\mu}$a) of 6321, and core loss(W10/50) of 1.27 W/kg from the rings of 1.1 mm thick. The magnetic induction values were found to be almost identical to those of non-oriented Fe-6.5wt% Si steel sheet and double the value of 6.5wt% Si sheet prepared by the CVD technique. The high frequency core losses(W) up to 10 kHz(W10/10k) were measured to be competitive to those of grain-oriented Fe-6.5wt% Si steel sheet.

• 한국주조공학회지
• /
• 제15권4호
• /
• pp.397-407
• /
• 1995

The objectives of this study are first, to expand our understanding of relationship between magnetic properties and microstructural features such as grain size and texture, and second to reduce core loss of Fe-6.5%Si strip through optimizing heat treatment conditions. A rapid solidification technique, planar flow casting(PFC), was adopted to produce Fe-6.5%Si strips. The strips were heat treated under various conditions. The results show that heat treatment conditions can change not only grain size but also (200) texture formation on the strip surface. Variation in magnetic properties of Fe-6.5%Si strip is analyzed in terms of the change in grain size as well as (200) texture on the strip surface. The heat treatment conditions of $1100^{\circ}C$ over 2 hr or $1150^{\circ}C$ $1{\sim}2hr$ in $N_2+5%H_2$ appear to minimize core loss of Fe-6.5%Si strips.

• 한국재료학회지
• /
• 제31권5호
• /
• pp.296-300
• /
• 2021

Al-Cr-Si ternary quench ribbons are fabricated using a single roll method and investigated for their structural and thermal properties. In particular, the sinterability is examined by pulse current sintering to obtain the following results. The Al₇₄Cr₂₀Si₆ composition becomes a quasicrystalline single phase; by reducing the amount of Cr, it becomes a two-phase mixed structure of Al phase and quasicrystalline phase. As a result of sintering of Al₇₄Cr₂₀Si₆, Al₇₇Cr₁₃Si₁₀ and Al₉₀Cr₆Si₄ compositions, the sintering density is increased with the large amount of Al phase; the sintering density is the highest in Al₉₀Cr₆Si₄ composition. In addition, as a result of investigating the effects of sintering temperature and pressurization on the sintered density of Al₉₀Cr₆Si₄, a sintered compact of 99% or more at 513 K and 500 MPa is produced. In particular, since the Al-Cr-Si ternary crystal is more thermally stable than the Al-Cr binary quaternary crystal, it is possible to increase the sintering temperature by about 100 K. Therefore, using an alloy of Al₉₀Cr₆Si₄ composition, a sintered compact having a sintered density of 99 % or more at 613 K and 250 MPa can be manufactured. It is possible to increase the sintering temperature by using the alloy system as a ternary system. As a result, it is possible to produce a sintered body with higher density than that possible using the binary system, and at half the pressure compared with the conventional Al-Cr binary system.

• 대한전자공학회논문지SD
• /
• 제46권6호
• /
• pp.1-5
• /
• 2009

6H-SiC 전자 및 정공의 이온화계수로부터 유효이온화계수를 추출하여 6H-SiC PN 다이오드의 항복전압과 온-저항을 위한 해석적 표현식을 유도하였다. 해석적 모형으로부터 구한 항복전압을 $10^{15}{\sim}10^{18}\;cm^{-3}$의 도핑 농도 범위에서 실험 결과와 비교하여 10% 이내의 오차로 일치하였고, 농도 함수의 온-저항의 해석적 결과도 $5{\times}10^{15}{\sim}10^{16}\;cm^{-3}$의 범위에서 이미 발표된 수치적 결과와 매우 잘 일치하였다.

• 한국주조공학회지
• /
• 제21권2호
• /
• pp.119-126
• /
• 2001

Al/15%Gr. composite have been manufactured by mixing, compacting, and extruding aluminium powder and graphite powder. Then, Al-6%Si/x%Gr., Al-12%Si/x%Gr., and Al-18%Si/x%Gr.(x: 0, 2, 4, 6, 8) composites have been manufactured by remelting the extruded materials(Al/15%Gr.), Al-33.3%Si alloy, and Al ingot, etc. We conducted experiments to chracterize the microstructure, and damping properties and hardness. The result of microstructure experiment on Al-x%Si/y%Gr. composites reveals the good dispersion of graphite. As to Al-Si/y%Gr. composites, the more the graphite contents, the less the tensile strength. And the tensile strength varied according to contents of Si: with its highest value in Al-18%Si/y%Gr. composites and lowest in Al-6%Si/y%Gr. composites. As to Al-x%Si/y%Gr. composites, the more the contents of graphite, the more the vibration damping properties. And we can get the highest vibration damping rate in Al-12%Si/y%Gr. composites which matrix structure is an eutectic component.

• 대한환경공학회지
• /
• 제35권4호
• /
• pp.240-246
• /
• 2013

$SF_6$는 지구온난화지수가 가장 높은 중요한 온실가스이다. 본 연구에서는 마이크로파 조사에 따른 산화알루미늄이 혼합된 실리콘카바이드의 SF6 제거실험을 실시하였다. DRE (Decomposition and Removal Efficiencies)실험은 3,000 ppm의 $SF_6$를 사용하여 GC-TCD를 통하여 분석하였다. 산화알루미늄의 함량이 10~30 wt%까지 $SF_6$의 제거효율은 증가하였으나 산화알루미늄의 함량이 40~50 wt%에서 제거효율이 감소하였다. 특히 $900^{\circ}C$ 이상 에서 SiC-$Al_2O_3$ (20 wt%)와 SiC-$Al_2O_3$ (30 wt%)는 99.99%의 $SF_6$ 제거효율을 보여주었으며 SiC-$Al_2O_3$ (30 wt%)가 $700^{\circ}C$에서 96.72%의 제거효율을 보여주었다. 마이크로파 조사량과 산화알루미늄의 함량을 고려시 SiC-$Al_2O_3$ (30 wt%)가 $SF_6$ 제거에 가장 적절하였다. 본 연구의 결과로 마이크로파에 의한 $SF_6$ 제거시 SiC에 $Al_2O_3$의 함량 조절이 중요할 것으로 사료되어진다.

• 한국자기학회지
• /
• 제18권5호
• /
• pp.195-199
• /
• 2008

$Fe_{93.5}Si_{6.5}$ 분말/에폭시 복합재 필름은 열경화과정을 이용하여 준비되었다. 자성분말/에폭시 복합재의 구조와 전자기적 특성 및 전자파 흡수특성을 분석하기 위하여 주사전자현미경(scanning electron microscpoe, SEM), 시료진동형 자력계(vibrating sample magnetometer, VSM), 네트워크 어날라이져(network analyzer) 등을 이용하였다. 분석결과, 포화자속밀도는 복합재 내의 $Fe_{93.5}Si_{6.5}$ 분말이 차지하는 양에 의존하며, 이는 초기투자율에 영향을 미친다. 결과적으로 1 GHz 이상의 주파수에서는 와전류 손실(eddy current loss)이 주요한 인자이며, 자성분말/에폭시 복합재의 공명주파수(resonance frequency)는 복합재 내의 $Fe_{93.5}Si_{6.5}$ 분말의 양이 증가함에 따라 감소한다. 반사손실(reflection loss)은 자성분말/에폭시 복합재의 투자율(permeability)과 유전율(permittivity)로부터 계산에 의해 구해진다. 50 wt% $Fe_{93.5}Si_{6.5}$ 분말의 양과 5 mm 두께를 가진 자성분말/에폭시 복합재는 3.66 GHz와 4.16 GHz 사이에서 -20 dB 이하의 값을 보인다. 따라서 Fe-Si/에폭시 박형 복합재는 마이크로파 흡수체로서 좋은 후보물질이 될 수 있을 것으로 판단된다.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.402-409
• /
• 2013

The objective of this study was to develop a synthesis process for ${\beta}$-SiC powders to reduce the synthesis temperature and to control the particle size and to prevent particle agglomeration of the synthesized ${\beta}$-SiC powders. A phenol resin and TEOS were used as the starting materials for the carbon and Si sources, respectively. $SiO_2$-C hybrid precursors with various C/Si mole ratios were fabricated using a conventional sol-gel process. ${\beta}$-SiC powders were synthesized by a carbothermal reduction process using $SiO_2$-C hybrid precursors with various C/Si mole ratios (1.6 ~ 2.5) fabricated using a sol-gel process. In this study, the effects of excess carbon and the addition of Si powders to the $SiO_2$-C hybrid precursor on the synthesis temperature and particle size of ${\beta}$-SiC were examined. It was found that the addition of metallic Si powders to the $SiO_2$/C hybrid precursor with excess carbon reduced the synthesis temperature of the ${\beta}$-SiC powders to as low as $1300^{\circ}C$. The synthesis temperature for ${\beta}$-SiC appeared to be reduced with an increase of the C/Si mole ratio in the $SiO_2$-C hybrid precursor by a direct carburization reaction between Si and excess carbon.

• 대한화학회지
• /
• 제33권4호
• /
• pp.337-342
• /
• 1989

비기체 연소란 테르밋 반응과 같이 고체혼합물 내에서 직접 점화할 때 자발적으로 진행되는 매우 격렬한 발열반응이다. 비기체 연소합성법은 빠른 공정, 에너지 절약, 저공정가, 그리고 고순도의 생산품을 만들 수 있는 장점이 있다. 이 비기체 연소법에 의하여 Ti$Si_x$(x=0.6, 0.8, 1.0, 2.0)계의 시료를 외부적인 소결 공정없이 합성하였다. $Ti_5Si_3$와 $Ti_5Si_4$는 각각 육방정계와 정방정계 이었고 TiSi와 $TiSi_2$는 사방정계 이었다. X-선 분석결과는 모두 JCPDS data와 매우 잘 일치하였다. 모든 반응의 연소형은 정류상태 연소였으며 $Ti_5Si_3$, $Ti_5Si_4$ 및 TiSi의 연소파의 전파속도는 0.6cm/sec 이상이었고 $TiSi_2$의 경우는 0.28cm/sec이었다.