• 한국주조공학회지
• /
• 제31권1호
• /
• pp.18-25
• /
• 2011

Effect of Fe and Mn contents on the tensile properties has been studied in Al-9wt%Si-0.3wt%Mg alloy. As Fe content of Al-9wt%Si-0.3wt%Mg-0.5wt%Mn alloy increased from 0.15wt% to 0.45wt%, tensile strength of as-cast alloy decreased from 192 MPa to 174 MPa, and elongation of the alloy also decreased from 4.8% to 4.2%. Decrease of these properties can be explained as the formation of plate shape, ${\beta}-Al_5FeSi$ phase with high Fe/Mn ratio of the alloy. However when Mn content of Al-9wt%Si-0.3wt%Mg-0.45wt%Fe alloy increased from 0.3wt% to 0.5wt%, tensile strength of T6 aged alloy increased from 265 MPa to 275 MPa, and elongation of the alloy increased from 2.3% to 3.6%. These improvements attribute to chinese script, ${\alpha}-Al_{15}(Mn,Fe)_3Si_2$ phase shape-modified from ${\beta}-Al_5FeSi$ phase with low Fe/Mn ratio of the alloy.

• 한국재료학회지
• /
• 제12권1호
• /
• pp.48-53
• /
• 2002

$Al_2O_3-SiC$ and $Al_2O_3-SiC$-TiC composite powders were prepared by SHS process using $SiO_2,\;TiO_2$, Al and C as raw materials. Aluminum powder was used as reducing agent of $SiO_2,\;TiO_2$ and activated charcoal was used as carbon source. In the preparations of $Al_2O_3-SiC$, the effect of the molar ratio in raw materials, compaction pressure, preheating temperature and atmosphere were investigated. The most important variable affecting the synthesis of $Al_2O_3-SiC$ was the molar ratio of carbon. Unreactants remained in the product among all conditions without compaction. The optimum condition in this reaction was $SiO_2$: Al: C=3: 5: 5.5, 80MPa compaction pressure under Preheating of $400^{\circ}C$ with Ar atmosphere. However there remains cabon in the optimum condition. The effect of $TiO_2$ as additive was investigated in the preparations of $Al_2O_3-SiC$. As a result of $TiO_2$ addition, $Al_2O_3-SiC$-TiC composite powder was prepared. The $Al_2O_3$ powder showed an angular type with 8 to $15{\mu}m$, and the particle size of SiC powder were 5~$10{\mu}m$ and TiC powder were 2 to $5{\mu}m$.

• 대한화학회지
• /
• 제33권4호
• /
• pp.337-342
• /
• 1989

비기체 연소란 테르밋 반응과 같이 고체혼합물 내에서 직접 점화할 때 자발적으로 진행되는 매우 격렬한 발열반응이다. 비기체 연소합성법은 빠른 공정, 에너지 절약, 저공정가, 그리고 고순도의 생산품을 만들 수 있는 장점이 있다. 이 비기체 연소법에 의하여 Ti$Si_x$(x=0.6, 0.8, 1.0, 2.0)계의 시료를 외부적인 소결 공정없이 합성하였다. $Ti_5Si_3$와 $Ti_5Si_4$는 각각 육방정계와 정방정계 이었고 TiSi와 $TiSi_2$는 사방정계 이었다. X-선 분석결과는 모두 JCPDS data와 매우 잘 일치하였다. 모든 반응의 연소형은 정류상태 연소였으며 $Ti_5Si_3$, $Ti_5Si_4$ 및 TiSi의 연소파의 전파속도는 0.6cm/sec 이상이었고 $TiSi_2$의 경우는 0.28cm/sec이었다.

• 한국재료학회지
• /
• 제18권11호
• /
• pp.604-609
• /
• 2008

The sintering behavior of zircon with silica was investigated. Zircon with 5 vol% of sedimentation $SiO_2$ resulted in the apparent density of $4.45\;g/cm^3$, the diametral tensile strength of $12.125\;kgf/cm^2$, and the micro Vickers hardness of 1283 HV. The dissociation temperature and mechanical characteristics of the $ZrSiO_4$ were changed with different kinds of $SiO_2$. $SiO_2$ addition prevented dissociation of $ZrSiO_4$. Zircon with 5 vol% of sedimentation $SiO_2$ and with 5 vol% of fused $SiO_2$ resulted in increased diametral tensile strength and increased micro Vickers hardness by suppression of $ZrSiO_4$ dissociation and low temperature liquid $SiO_2$ formation. Zircon with fumed $SiO_2$ and quartz $SiO_2$ resulted in decreased diametral tensile strength and decreased micro Vickers hardness because of cristobalite and quartz phase formation and high temperature liquid $SiO_2$ formation. Zircon with 10 vol% of $SiO_2$ resulted in decreased diametral tensile strength and decreased micro Vickers hardness because of weak particle coupling due to excess formation of liquid $SiO_2$.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.335-341
• /
• 2011

Continuous SiC fiber-reinforced SiC-matrix composites ($SiC_f$/SiC) had been fabricated by electrophoretic infiltration combined with ultrasonication. Nano-sized ${\beta}$-SiC added with 12 wt% of $Al_2O_3-Y_2O_3$ additive and Tyranno$^{TM}$-SA3 fabric were used as a matrix phase and fiber reinforcement, respectively. After hot pressing at 5 different conditions, the density, microstructure and mechanical properties of $SiC_f$/SiC were characterized. Hot pressing at relatively severe conditions, such as $1750^{\circ}C$ for 1 and 2 h, resulted in a brittle fracture behavior due to the strong fiber-matrix interface in spite of their high flexural strength. On the other hand, toughened $SiC_f$/SiC composite could be achieved by hot pressing at milder condition because of the formation of weak interface in spite of the decreased flexural strength. These results proposed the importance of weak fiber-matrix interface in the fabrication of ductile $SiC_f$/SiC composite.

• 한국표면공학회지
• /
• 제48권5호
• /
• pp.233-237
• /
• 2015

In order to investigate the potassium (K) gettering, Al-1%Si/$SiO_2$/PSG multilevel thin films were fabricated. Al-1%Si thin films and $SiO_2$/PSG passivations were deposited by using DC magnetron sputter techniques and APCVD (atmosphere pressure chemical vapor deposition), respectively. Heat treatment was carried out at $300^{\circ}C$ for 5 h in air. SIMS (secondary ion mass spectrometry) depth profiling analysis was used to determine the distribution of K, Al, Si, P, and other elements throughout the $SiO_2$/PSG passivated Al-1%Si thin film interconnections. Potassium peaks were observed throughout the $SiO_2$/PSG passivation layers, and especially the interface gettering at the $SiO_2$/PSG and at the Al-1%Si/$SiO_2$ interfaces was observed. Potassium gettering in Al-1%Si/$SiO_2$/PSG multilevel thin films is considered to be caused by a segregation type of gettering.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1593-1595
• /
• 2002

Single crystal 3C-SiC(cubic silicon carbide) thin-films were deposited on Si(100) wafers up to a thickness of 4.3 ${\mu}m$ by APCVD method using HMDS(hexamethyildisilane) at $1350^{\circ}C$. The HMDS flow rate was 0.5 sccm and the carrier gas flow rate was 2.5 slm. The HMDS flow rate was important to get a mirror-like crystal surface. The growth rate of the 3C-SiC films was 4.3 ${\mu}m/hr$. The 3C-SiC epitaxial films grown on Si(100) were characterized by XRD, AFM, RHEED, XPS and raman scattering, respectively. The 3C-SiC distinct phonons of TO(transverse optical) near 796 $cm^{-1}$ and LO(longitudinal optical) near $974{\pm}1cm^{-1}$ were recorded by raman scattering measurement. The hetero-epitaxially grown films were identified as the single crystal 3C-SiC phase by XRD spectra($2{\theta}=41.5^{\circ}$).

• 한국재료학회지
• /
• 제8권4호
• /
• pp.362-367
• /
• 1998

Mg-6Zn-2Cu 및 Mg-6Zn-1.5Si(wt%)합금의 미세조직 및 석출거동을 조사하였다. 합금은 $4 x 10^{-4}$ 의 진공분위기에서 제조하였고 용체화처리는 $435^{\circ}C$에서 8시간 행하였다. Mg-6Zn합금에 1.5wt.%Si를 첨가한 합금에서는 입계 및 입내에 $10\mu\textrm{m}$-2$\mu\textrm{m}$크기의 구형의 $MgZn_{2}$와 $Mg_{2}$Si상이 존재한다. 시효경화거동은 용체화처리된 Mg-6Zn-2Cu 및 Mg-6Zn-1.5Si합금에서 조사되었다. 결정립 미세화에 의한 경도증가효과는 Mg-6Zn-2Cu합금계에서 크게 나타났으나, 시효에 의한 경도증가효과는 Mg-Zn-Si합금계에서 크게 나타났다. 시효처리 후 생성된 석출상들은 투과전자현미경 분석결과 Mg-6Zn-2Cu합금에서는$ Mg_{2}$$Zn_{3}$이었고 Mg-6Zn-1.5Si 합금에서는 $Mg_{2}$$Zn_{11}$ /이었다.

• 전자공학회논문지D
• /
• 제36D권3호
• /
• pp.41-47
• /
• 1999

SiN로부터 GaAs로 확산된 Si을 이용하여 소스와 드레인 영역에 고농도 Si 확산층을 갖는 GaAs MESFET를 제작하였다. 제작된 MESFET의 소스와 드레인 영역은 950°C, 30초의 열처리에 의해 Si 확산층이 표면에서부터 350Å두께로 형성되어 확산층이 없을 때 1000Ω/sq.정도였던 면저항이 400Ω/sq.로 내외로 감소하였다. 고농도로 확산된 Si은 AuGe/Ni/Au와 GaAs 기판 사이의 저항성 접촉 특성을 2.5×10\sub -6\Ω-cm\sup 2\로부터 1.5×10\sup -6\Ω-cm\sup 2\로 개선시켰다. 제작된 lum게이트 길이의 확산층을 갖는 MESFET는 최대 트랜스컨덕턴스가 260mS/mm 이었으며, 이득과 최소잡음지수는 12GHz에서 각각 8.5dB와 3.57dB를 나타내 같이 제작된 표면 확산 층이 없는 MESFET에 비해 1.3dB와 0.4dB가 향상되었다.

• 한국주조공학회지
• /
• 제33권6호
• /
• pp.233-241
• /
• 2013

Effect of Fe and Mn contents on the castability of Al-9wt%Si-xMg-yFe-zMn alloy has been studied. The alloy was composed of ${\alpha}$-Al phase, Al+eutectic Si phase, ${\beta}$-Al5FeSi compound and chinese script ${\alpha}$-$Al_{15}(Mn,Fe)_3Si_2$ compound. ${\beta}$-$Al_5FeSi$ and ${\alpha}$-$Al_{15}(Mn,Fe)_3Si_2$ compounds assumed to effect the fluidity and shrinkage behaviors of the alloy during solidification due to the crystallization of ${\alpha}$-$Al_{15}(Fe,Mn)_3Si_2$ and ${\beta}$-$Al_5FeSi$ compounds above eutectic temperature. As Fe and Mn contents of Al-9wt%Si-0.3wt%Mg system alloy increased from 0.15wt% to 0.6wt% and from 0.3wt% to 0.7wt%, fluidity of the alloy decreased by 5.7% and 3.3%, respectively. And as Mg content of Al-9wt%Si-0.45wt%Fe-0.5wt%Mn system alloy increased from 0.3wt% to 0.4wt%, fluidity of the alloy decreased by 8.6%. When Fe content of the alloy increased from 0.15wt% to 0.6wt%, macro shrinkage ratio decreased from 6.1% to 4.1%, and micro shrinkage ratio increased from 0.04% to 0.24%. Similarly, Mn content of the alloy increased from 0.3wt% to 0.7wt%, macro shrinkage ratio decreased from 6.0% to 4.5% and micro shrinkage ratio increased from 0.12% to 0.18%. Judging from the castability of the alloy, Al-9wt%Si-0.3wt%Mg alloy with low content of Fe and Mn, 0.1wt% Fe and 0.3wt% Mn, is recommendable.