• 한국세라믹학회지
• /
• 제17권4호
• /
• pp.197-202
• /
• 1980

The oxidation mechanism of the not sintered pellets and sintered bodies of $Si_3N_4$ was investigated. in air over the temperature range of 800~130$0^{\circ}C$. The $\beta$-cristobalite was instantaneously formed and covered the particles of powder packed in the not sintered and weakly sintered porous $Si_3N_4$ bodies by molecular diffusion of oxygen through the porous Si3N4 bodies and an immediate oxidation. The diffusion of oxygen ion through the formed $\beta$-cristobalite surface layer is assumed to control the further oxidation of the $Si_3N_4$ particles of the porous $Si_3N_4$ bodies. The diffusion coefficients and activation energies of oxygen ion through the $\beta$-cristobalite layer were obtained by the use of a derived equation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1493-1498
• /
• 2007

Silicon Nitride ($Si_3N_4$), which is widely used in a variety of applications, is hard-to-machine due to its high hardness. At high temperature (e.g. above $1000^{\circ}C$), however, the machinability can be greatly improved. In this work, we used a $CO_2$ laser with a high absorptivity to $Si_3N_4$ of 0.9 to preheat the surface of a rothting $Si_3N_4$ rod. Preheating and turning of $Si_3N_4$ was executed at the same time. The result of machining was MRR of $8.0mm^3/s$ that is four times faster than normal grinding. Continuous chip formation was observed by a microscope.

• 한국분말재료학회지
• /
• 제8권3호
• /
• pp.174-178
• /
• 2001

The microstructure and mechanical properties of $Si_3N_4/BN $nanocomposites synthesized by chemical processing were investigated. The nanocomposites containing 15 vol% hexagonal BN (h-BN) were fabricated by hot-pressing $\alpha-Si_3N_4$powders covered with turbostratic BN (t-BN). The t-BN coating on $\alpha-Si_3N_4$particles was prepared by heating $\alpha-Si_3N_4$ particles covered with a mixture of boric acid and urea in hydrogen gas. TEM observations of this nanocomposite revealed that nano-sized h-BN particles were homogeneously dispersed within $Si_3N_4$grains as well as at grain boundaries. The strength and thermal shock resistance were significantly improved in comparison with the $Si_3N_4/BN$ microcomposites.

• 한국세라믹학회지
• /
• 제25권6호
• /
• pp.615-622
• /
• 1988

To develope good slip and microstructure of Si3N4 the knowledge of the interaction of particles in liquid systems is required. In this work polyethyleneimines was tested as a stabilizer for Si3N4-water system. The stability of slip dispersed with polyethyleneimines was good over a wide range of pH and concentrated slips with low viscosity could be cast. This work comprises a systematic investigation including determination of electrical mobility in order to estimate the particle surface charge, determination of sedimentation rate, as well as measurements of the viscosity as a function of dispersants, pH and shear rates. The influence of deflocculation on the microstructure of slip cast Si3N4 was discussed.

• 한국세라믹학회지
• /
• 제33권6호
• /
• pp.686-692
• /
• 1996

• 한국표면공학회지
• /
• 제35권3호
• /
• pp.133-140
• /
• 2002

The Ti-Si-N coating layers were synthesized on SKD 11 steel substrate by a DC reactive magnetron co-sputtering technique with separate Ti and Si targets. The high resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) analyses for the coating layers revealed that microstructure of Ti-Si-N layer was nanocomposite, consisting of nano-sized TiN crystallites surrounded by amorphous $Si_3$$N_4$ phase. The highest hardness value of about 39 GPa was obtained at the Si content of ~11at.%, where the microstructure had fine TiN crystallites (about 5nm in size) dispersed uniformly in amorphous matrix. As the Si content in Ti-Si-N films increased, the TiN crystallites became from aligned to randomly oriented microstructure, finer, and fully penetrated by amorphous phase. Free Si appeared in the layers due to the deficit of nitrogen source at higher Si content. Friction coefficient and wear rate of the Ti-Si-N coating layer significantly decreased with increase of relative humidity. The self-lubricating tribe-layers such as $SiO_2$ or (OH)$Si_2$ seemed to play an important role in the wear behavior of Ti-Si-N film against steel.

• 한국진공학회지
• /
• 제6권3호
• /
• pp.220-226
• /
• 1997

실리콘 미세가공기술로 형성된 프레임 모양의 실리콘 기판에 의해 지지되는 -$Si_3N_4/300 nm-SiO_2/150 nm-Si_3N_4$ 광반사막을 제조하였으며, 이것을 광섬유와 결합하여 강도형 다모드 광섬유 압력센서를 제작하고 그 특성을 조사하였다. $Si_3N_4/SiO_2/Si_3N_4$다아아 프램을 광반사막으로 사용하기 위하여 이 다이아프램의 뒷면에 NiCr 및 Au 박막을 각각 진 공증착하여 광반사막에서의 광투과에 의한 광손실을 수%로 감소시킬 수 있었다. 유전체 다 이아프램의 상하에 각각 있는 $Si_3N_4$막은 KOH 수용액에 의한 실리콘 이방성 식각시 자동식 각 정지층 역할을 하여 다이아프램 두께의 재현성이 우수하였다. 다이아프램의 크기가 3$\times$ 3$\textrm{mm}^2$, 4$\times$4$\textrm{mm}^2$ 및 5$\times$5$\textrm{mm}^2$인 센서는 각각 0~126.64kPa, 0~79.98kPa 및 0~46.66kPa의 압력범위에서 선형적인 광출력-압력 특성을 나타내었으며, 이들 센서의 압력감도는 각각 약 20.69nW/kPa, 26.70nW/kPa 및 39.33nW/kPa로서, 다이아프램의 크기가 증가할수록 압력감 도도 증가하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.75-75
• /
• 2000

플라즈마 화학증착법(Plasma Enhanced Chemical Vapor Deposition, PECVD)을 이용하여 양질의 Si3N4 금속-유전막-금속(Metal-Insulator-Metal, MIM) 커페시터를 구현하였다. Fig.1에 나타낸 바와 같이 p형 실리콘 웨이퍼의 열 산화막 위에 1%의 실리콘을 함유하는 알루미늄을 스퍼터링으로 증착하여 전극을 형성하고 두 전극사이에 Si3N4 박막을 증착하여 MIM구조의 박막 커패시터를 제조하였다. Si3N4 유전막은 150Watt의 RF 출력하에서 반응 가스 N2/SiH4/NH3를 각각 300/10/80 sccm로 흘려주어 전체 압력을 1Torr로 유지하면서 40$0^{\circ}C$에서 플라즈마 화학증착법을 이용하여 증착하였으며, Al과 Si3N4 층의 계면에는 Ti과 TiN을 스퍼터링으로 증착하여 확산 장벽으로 이용하였다. 각 시편의 커패시턴스 및 바이어스 전압에 따른 누설 전류의 변화는 LCR 미터를 이용하여 측정하였고 각 시편의 커패시턴스 및 바이어스 전압에 따른 누설 전류의 변화는 LCR 미터를 이용하여 측정하였고 각 시편의 유전 특성의 차이점을 미세구조 측면에서 이해하기 이해 극판과 유전막의 단면 미세구조를 투과전자현미경(Transmission Electron Microscope, TEM)을 이용하여 분석하였다. 유전체인 Si3N4 와 전극인 Al의 계면반응을 억제시키기 위해 TiN을 확산 장벽으로 사용한 결과 MIM커패시터의 전극과 유전체 사이의 계면에서는 어떠한 hillock이나 석출물도 관찰되지 않았다. Fig.2와 같은 커패시턴스의 전류-전압 특성분석으로부터 양질의 MIM커패시터 특성을 f보이는 Si3N4 의 최소 두께는 500 이며, 그 두께 미만에서는 대부분의 커패시터가 전기적으로 단락되어 웨이퍼 수율이 낮아진다는 사실을 알 수 있었다. TEM을 이용한 단면 미세구조 관찰을 통해 Si3N4 층의 두께가 500 미만인 커패시터의 경우에 TiN과 Si3N4 의 계면에서 형성되는 슬릿형 공동(slit-like void)에 의해 커패시터의 유전특성이 파괴된다는 사실을 알게 되었으며, 이러한 슬릿형 공동은 제조 공정 중 재료에 따른 열팽창 계수와 탄성 계수 등의 차이에 의해 형성된 잔류응력 상태가 유전막을 기준으로 압축응력에서 인장 응력으로 바뀌는 분포에 기인하였다는 사실을 확인하였다.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.386-391
• /
• 2014

Silicon nitride ($Si_3N_4$) is regarded as one of the most promising materials for high temperature structural applications due to its excellent mechanical properties at both room and elevated temperatures. However, one high-temperature $Si_3N_4$ material intended for use in radomes has a relatively high dielectric constant of 7.9 - 8.2 at 8 - 10 GHz. In order to reduce the dielectric constant of the $Si_3N_4$, an in-situ reaction process was used to fabricate $Si_3N_4-SiO_2$-BN composites. In the present study, an in-situ reaction between $B_2O_3$ and $Si_3N_4$, with or without addition of BN in the starting powder mixture, was used to form the composite. The in-situ reaction process resulted in the uniform distribution of the constituents making up the composite ceramic, and resulted in good flexural strength and dielectric constant. The composite was produced by pressure-less sintering and hot-pressing at $1650^{\circ}C$ in a nitrogen atmosphere. Microstructure, flexural strength, and dielectric properties of the composites were evaluated with respect to their compositions and sintering processes. The highest flexural strength (193 MPa) and lowest dielectric constant (5.4) was obtained for the hot-pressed composites. The strength of these $Si_3N_4-SiO_2$-BN composites decreased with increasing BN content.

• 한국세라믹학회지
• /
• 제16권4호
• /
• pp.206-212
• /
• 1979

The phase relations and microstructure appeared at 1700℃ in a system of Si3N4-Al2O3-SiO2 were studied. The samples were pressurelessly sintered at 1700℃ for 1hr and reheated at 1600℃ for 1hr under nitrogen atmosphere. The compounds formed were identified by X-ray diffraction method and the microstrues were observed by SEM. The stable phases appeared in this system were X-phase, Si2ON2, β'-Si3N4 and Mullite. From the results of those experiments, it was concluded that the X-phase has very close composition to that proposed by G, K. Layden, Si3Al6O12N2. SEM photographs showed that Si2ON2 was a plate phase and X-phase was a rectagular plate phase.