• 제목/요약/키워드: SI traceability

검색결과 17건 처리시간 0.023초

비표면적 인증표준물질 개발 (Development of Certified Reference Materials for Specific Surface Area)

  • 최병일;김종철;김태영;남현수;권수용
    • 분석과학
    • /
    • 제18권1호
    • /
    • pp.74-84
    • /
    • 2005
  • NT, BT 산업의 발달에 함께 계면에서의 흡착특성의 파악은 신물질의 개발이나 공정의 첨단화에서 꼭 필요한 과제가 되고 있다. 체적식 가스흡착방법은 정량적인 흡착량의 측정이 가능하여 비표면적의 표준측정장비로 인식되고 있다. 상용 비표면적 측정장비의 신뢰성 검증을 위하여 인증표준물질을 개발하였고, SI 단위에 소급성을 유지하는 표준장비에 의해 불확도가 평가되었다. 제작된 인증물질은 비표면적이 $10.72{\pm}0.46m^2g^{-1}$ 인 silicon nitride 분말과 $149.50{\pm}3.44m^2g^{-1}$ 인 alumina 분말이다. 이런 검증된 인증물질의 보급은 산업계에 신뢰성 있는 비표면적 측정결과를 줌으로서, 일관성 있는 공정운용에 의한 품질관리, 생산성 향상, 안정성 판단 및 신제품 개발 등에 기여할 것이다.

철도차량 스마트 운영관리를 위한 RFID 기술현황 및 개발 필요성 (A case study on the RFID technology and the necessity of development for smart management of railway vehicle)

  • 이상학;차정훈;서봉진;박찬영;하병용;이은미;김창현;이학용;김재식;김관수;송정훈;박세영;황시원;여진경
    • 한국전자통신학회논문지
    • /
    • 제9권2호
    • /
    • pp.219-230
    • /
    • 2014
  • 철도차량에 RFID 시스템을 도입함으로써 철도 부품관리 등을 포함한 철도차량의 스마트한 운영관리가 가능하도록 하는 것은 경제적, 산업적 뿐 아니라 사회적으로도 많은 필요성이 대두되고 있다. 본 논문에서는 해외의 RFID 연구 및 개발 활용사례를 조사 분석하였다. 철도 뿐 아니라 다양한 산업분야에 RFID 기술이 적용된 사례에 관해서도 조사하였다. 철도분야에서는 주로 차량위치 검지, 차량인식 등에 RFID 시스템이 사용된 경우가 거의 대부분이었고 부품의 단순이력 관리 등에 응용한 사례도 있었다. 본 연구를 통해, 세계적으로 이미 여러 산업분야에서 RFID 기술이 활용되고 있고 철도분야에서도 여러 국가에서 RFID 기술을 활용한 운영이 활성화되어 있으나 이러한 기술 활용은 주로 차량운행과 관련된 분야에 국한되어 있고 철도부품의 유지보수 등의 분야에서는 RFID 기술개발 및 활용이 미흡하다는 것을 알 수 있었다. 따라서 국내의 철도차량의 스마트한 운영관리를 위해서는 RFID 기술을 철도부품의 유지보수 및 이력관리에 적용할 수 있는 시스템이 반드시 필요하다.

제주 흑우 집단에서 Indel, Microsatellite 마커와 MC1R 유전자형을 이용한 친자 확인 (A Parentage Test using Indel, Microsatellite Markers and Genotypes of MC1R in the Jeju Black Cattle Population)

  • 한상현;조상래;조인철;조원모;김상금;양성년;강용준;박용상;김영훈;박세필;김은영;이성수;고문석
    • 한국수정란이식학회지
    • /
    • 제28권3호
    • /
    • pp.207-213
    • /
    • 2013
  • This study was carried out to examine a molecular marker system for parentage test in Jeju Black cattle (JBC). Based on the preliminarily studies, we finally selected for construction of a novel genetic marker system for molecular traceability, identity test, breed certification, and parentage test in JBC and its related industrial populations. The genetic marker system had eight MS markers, five indel markers, and two single nucleotide polymorphisms (SNPs; g.G299T and g.del310G) within MC1R gene which is critical to verify the breed specific genotypes for coat color of JBC differing from those of exotic black cattle breeds such as Holstein and Angus. The results showed lower level of a combined non-exclusion probability for second parent (NE-P2) of $4.1202{\times}10^{-4}$ than those previously recommended by International Society of Animal Genetics (ISAG) of $5.000{\times}10^{-4}$ for parentage, and a combined non-exclusion probability for sib identity (NE-SI) of $2.679{\times}10^{-5}$. Parentage analysis has been successfully identified the JBC offspring in the indigenous population and cattle farms used the certified AI semens for production using the JBC-derived offspring for commercial beef. This combined molecular marker system will be helpful to supply genetic information for parentage test and traceability and to develop the molecular breeding system for improvement of animal productivity in JBC population.

Mass Balance Method for Purity Assessment of Organic Reference Materials: for Thermolabile Materials with LC-UV Method

  • Lee, Joonhee;Kim, Byungjoo
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권11호
    • /
    • pp.3275-3279
    • /
    • 2014
  • A mass balance method for purity assessment of thermolabile organic reference materials was established by combining several techniques, including liquid chromatography with UV/VIS detector (LC-UV), Karl-Fischer (K-F) Coulometry, and thermal gravimetric analysis (TGA). This method was applied to three fluoroquinolones like enrofloxacin, norfloxacin and ciprofloxacin. LC-UV was used to analyze structurally related organic impurities based on UV/VIS absorbance spectra obtained in combination with LC separation. For all three organic reference materials, the UV/VIS spectra of the separated impurities were similar to that of the major component of the corresponding materials. This indicates that the impurities are structurally related to the respective reference material sharing common chromophores. Impurities could be quantified by comparing their absorbances at the wavelength of maximum absorbance (${\lambda}_{max}$). The water contents of the reference materials were measured by K-F Coulometry by an oven-drying method. The total inorganic impurities contents were assayed from ash residues in TGA analysis with using air as a reagent gas. The final purities estimated from results of those analytical techniques were assigned as ($99.91{\pm}0.06$), ($97.09{\pm}0.17$) and ($91.85{\pm}0.17$)% (kg/kg) for enrofloxacin, norfloxacin and ciprofloxacin, respectively. The assigned final purities would be applied to the reference materials which will be used as calibrators for the certification of those compounds in matrix CRMs as starting points for the traceability of their certified values to SI units.

한국원자력연구소 기준 광자 및 베타선장 측정의 국제상호비교 (Intercomparison of the KAERI Reference Photon and Beta Radiation Measurements)

  • 장시영;김봉환;김장렬
    • Journal of Radiation Protection and Research
    • /
    • 제21권4호
    • /
    • pp.255-262
    • /
    • 1996
  • 이 논문은 최근 한국원자력연구소(KAERI)와 미국 패시픽노스웨스트 국립연구소(일명, 바텔연구소, PNNL)이 개인선량계의 성능검사를 위한 미국 ANSI N13.11 기준에 근거하여 KAERI 방사선 측정/교정실험실에서 수행한 KAERI 기준 광자 및 베타 방사선장의 국제 상호비교 측정결과를 설명하고 있다. 두 기관이 각각 자국의 일차 표준에 소급성을 갖는 방사선 검출기와 방사선 측정장치를 사용하여 자유공기중에서 광자의 조사선량(율), 공기커마(율)와 베타선의 절대 흡수선량(율)을 측정한 결과, 광자선장에 대해서는 ${\pm}2.0%$을 베타선장에 대해서는${\pm}1.0%$의 오차범위 내에서 잘 일치하였다. 따라서 KAERI의 기준 광자 및 베타 방사선장은 국제표준에 잘 만족되고 있음이 입증되었으며 장차 방사선 도시메트리 연구개발의 국가 기술기반으로 활용될 수 있음이 확인되었다

  • PDF

Investigation on the Stability of Uric Acid and its Isotope (1,3-15N2) in Ammonium Hydroxide for the Absolute Quantification of Uric Acid in Human Serum

  • Lee, Sun Young;Kim, Kwonseong;Oh, Han Bin;Hong, Jongki;Kang, Dukjin
    • Mass Spectrometry Letters
    • /
    • 제8권3호
    • /
    • pp.59-64
    • /
    • 2017
  • In clinical diagnosis, it's well known that the abnormal level of uric acid (UA) in human body is implicated in diverse human diseases, for instance, chronic heart failure, gouty arthritis, diabetes, and so on. As a primary method, an isotope dilution mass spectrometry (IDMS) has been used to obtain the accurate quantity of UA in blood or serum and also develop the certificated reference material (CRM) so as to provide a SI-traceability to clinical laboratories. Due to the low solubility of UA in water, an ammonium hydroxide ($NH_4OH$) has been considered as a promising solvent to increase the solubility of UA that enables the preparation of both UA and its isotope standard solution for next IDMS-based absolute quantification. But, because of using this $NH_4OH$ solvent, it gives rise to the unwanted degradation of UA. In this study, we sought to optimize condition for the stability of UA in $NH_4OH$ solution by varying the mole ratios of UA to $NH_4OH$, followed by ID-LC-MRM analysis. In addition, we also inspected minutely the effect of the storage temperatures. Additionally, we also performed the quantitative analysis of UA in the KRISS serum certificated reference material (CRM, 111-01-02A) with diverse mixing ratios of UA to $NH_4OH$ and then compared those values to its certification value. Based on our experiments, adjusting the mole ratio of 1/2 ($UA/NH_4OH$) with the storage temperature of $-20^{\circ}C$ is an effective way to secure both the solubility and stability of UA in $NH_4OH$ solution for next IDMS-based quantification of UA in serum.

KOLAS 교정기관의 측정동등성 확립을 위한 물유량 숙련도 시험 (Proficiency Test of Water Flow Rate for Measurement Equivalence Among KOLAS Accredited Laboratories)

  • 전세종;윤병로;김수진
    • 대한기계학회논문집 C: 기술과 교육
    • /
    • 제5권2호
    • /
    • pp.105-113
    • /
    • 2017
  • 한국인정기구(KOLAS)는 아시아태평양인정협의체(APLAC)에 소속되어 있으며, 측정 결과를 SI 단위로 소급하고 이를 유지시키기 위해 교정기관 인정제도를 운영하고 있다. 2016 년 6 월 현재, 22 개의 기관이 KOLAS 물유량 분야 교정기관으로 지정되어 있다. 이 중 12 개 KOLAS 교정기관들이 한국계량측정협회(KASTO)가 2015 년에 주관한 물유량 숙련도 시험(PM2015-08)에 참가했다. 이번 숙련도 시험은 KOLAS 교정기관들의 교정측정능력(CMC)을 고려하여 3 가지의 유량 범위($3.6m^3/h{\sim}12m^3/h$, $40m^3/h{\sim}80m^3/h$, $40m3/h{\sim}200m^3/h$)에서 실시되었다. 숙련도 시험의 목적은 참가기관들의 CMC 가 기준시험소(KRISS)의 CMC 와 비교하여 측정동등성이 성립하는지 여부를 판단하기 위한 것이다. 측정동등성은 측정동등성지수(number of equivalence; $E_n$)를 산출하여 평가했다. ${\mid}E_n{\mid}$ < 1 일 때, 측정동등성이 확립된다고 판단했다. 이번 시험에서 12 개 KOLAS 교정기관 모두 기준시험소와 측정동등성이 성립함을 확인했다.