• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.109-114
• /
• 2004

The purpose of this study lies in analyzing the characteristics of the carbonized textile fabrics and to know the carbonizing mechanism. Samples were Jiyo excavated from the grave of Mrs. Hansan Lee as the wife of Jinju Kang at Daeduk-gu, Daejon, and black fragements assumed as of the outside material of cotton skirt and black dusts collected out of Jikryung for official dress. The composition and status of the fiber were clarified by means of Microscopic FT-IR and both cross sectioanl and side parts of the fiber were observed using the technique of scanning electron microscopy(SEM). Finally EDS analysis was carried out to qualitatively analyze inorganic ingredients contained in the carbonized fiber. As a result of FT-IR measurement, characteristic peak was very strong around $1625cm^{-1}$ and could be found even between 2500 and $2300cm^{-1}$ because of a high-molecule pigmental substance, melanine. When SEM photography was applied to the fractions, the tissues were identified as silk fiborine through the observation of their side and cross sectional parts. SEM-EDS measurement indicated that both the cotton skirt and Jikryung for official dress contained a high proportion of inorganic substances such as Si, Ca suggesting the existence of silicide and calcium carbonate.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.2
• /
• pp.83-87
• /
• 2004

Phase noise performance and current consumption of Radio Frequency (RF) Voltage-Controlled Oscillator (VCO) are largely dependent on the Quality (Q) factor of inductor-capacitor (LC) tank. Because the Q-factor of LC tank is determined by on-chip spiral inductor, we designed, analyzed, and modeled on-chip differential inductor to enhance differential Q-factor, reduce current consumption and save silicon area. The simulated inductance is 3.3 nH and Q-factor is 15 at 2 GHz. Self-resonance frequency is as high as 13 GHz. To verify its use to RF applications, we designed 2 GHz differential LC VCO. The measurement result of phase noise is -112 dBc/Hz at an offset frequency of 100 kHz from a 2GHz carrier frequency. Tuning range is about 500 MHz (25%), and current consumption varies from 5mA to 8.4 mA using bias control technique. Implemented in $0.35-{\mu}m$ SiGe BiCMOS technology, the VCO occupies $400\;um{\times}800\;um$ of silicon area.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.12 no.1
• /
• pp.83-96
• /
• 2017

Objectives : The purpose of this study is to investigate the trends of acupuncture treatment on lateral epicondylitis. Methods : We investigated the recent clinical studies of acupuncture treatment for lateral epicondylitis via searching PubMed from 2007.1.1. to 2016.1.1. This study examined published years, the authors, journals, countries, types of study and classified articles by techniques of acupuncture. Results : 20 theses out of 38 were included, excluding papers duplicated or whose texts are not identified or not satisfying both acupuncture and lateral epicondylitis simultaneously. The theses were constantly published every year. Analyzed by journal, the most published journal was Zhongguo Zhen Jiu. The studies of China had the greatest number of the searched theses. The types of study were reviews, case series, and study protocol. The acupuncture technique used were Hwachim(burning acupuncture therapy), sweet bee venom pharmacopuncture, percutaneous needle electrolysis, electroacupuncture, small needle-knife, combination with local points and Tianzong(SI11), and anti-ashi-point. Conclusions : In order to develop acupuncture treatment of lateral epicondylitis, clinical studies on high level with objective evaluation scale are needed.

• Journal of the Korean Ceramic Society
• /
• v.43 no.12 s.295
• /
• pp.852-858
• /
• 2006

It is well known that $BaMgAl_{10}O_{17}:Eu^{2+}$ (BAM) and $CaMgSi_2O_6:Eu^{2+}$ (CMS) are a highly efficient blue phosphor. However, these phosphors in the form of thin films have not yet been realized clue to technical difficulties. We prepared thin film type BAM and CMS phosphors on quartz glass substrate using a pulsed laser deposition technique. The luminescent and structural properties of thin film phosphors were monitored as a function of key processing parameters such as oxygen partial pressure inside the deposition chamber, deposition time, laser energy density and the type of post-deposition treatments used. Even though we could not obtain single homogenous phases, thin films with large homogenous areas and a high photoluminescence could be produced by optimizing these processing parameters.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.168-175
• /
• 2008

The method of reinforced earth walls has grown remarkably and the frequency of utilization has been increased on a national scale thereafter introduced in the middle 1980s in Korea. Furthermore the construction case of the extensive Geosynthetic-Reinforced Segmental Retaining Walls had been increased. Currently, the design criterion of FHWA and NCMA mainly used in Korea suggest determining the horizontal distance of the upper/lower retaining wall based on the study results of the internal stability and the external stability of Segmental Retaining Walls but in many cases are not suitable for the actual situation in Korea. Therefore, in this study reviewed the design criterion of Geosynthetic-Reinforced Segmental Retaining Walls, performed the internal and external stability in Paju, Gyeonggi-do based on the design criterion of FHWA and NCMA, suggested the modified design criterion of FHWA with analyzing the results, and performed the stability analysis for the internal and external stability and the compound failure. Moreover for the confirmation of the modified FHWA design standard, the suggestion and the analysis of the numerical analysis approaching method using shear strength reduction technique were performed and the design cases utilized the modified FHWA design standard based on the study analysis were introduced.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.270-270
• /
• 2008

We present details of experimental results in the fabrication of high density line patterns, using imprint technique that can provide a simple and comparatively cost-effective manufacturing means. Barrier array structures for display or interconnects for semiconductor applications were the aims of this study. For pattern fabrication, a polymer layer (Ajinomoto GX-13 dielectric film) with a thickness of 38um that can act as either an insulating or a dielectric layer was laminated on a substrate. Fine tracks were then formed using a patterned stamp under isostatic pressure. The line width was ranged between 10 to 60 mm. A self-assembled monolayer (SAM) of fluorinated alkylchlorosilane [$CF_3(CF_2)5(CH_2)2SiCl_3$] as an anti-sticking layer was coated on the surface of the stamp prior to thermal imprint to improve the de-molding characteristic.

• Korean Institute of Interior Design Journal
• /
• v.23 no.4
• /
• pp.52-62
• /
• 2014

The rapid growth of economy improves not only the life quality of people in this modern society but also standards of value in connection with how those people would spend money as they engage in various leisure and cultural activities. That being the case, hotels are currently changing into places of new concepts depending on those new lifestyles of these people, and in those new places, people can entertain and experience as enjoying cultures. The marketing collaboration of the hotels with brands can be used as a more inclusive way to enhance brand images. In addition, as having infinite possibilities of the collaboration's being able to create a new-concept space with an identity of a brand included, this collaboration makes it possible for the design hotels to decorate their interior spaces differently from those of other hotels. In the light of that, the brand collaboration is basically divided into three groups which are the fashion collaboration, the technique collaboration and the designer collaboration, and the brand collaboration is also able to express the interior spaces of the design hotels as working on those six components, such as reproduction, events, alteration, messages, culture and image. After all, through the brand collaboration marketing, this thesis expects an interior design of a new-concept design hotel which would play a role as a complex cultural space.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.39-42
• /
• 2006

In this study, there is purpose that is on a concrete defect happen from aggregate minute's particle mixing in process that make waste concrete as recyclable cement puts to practical use constructing basic data for design of mix proportion used recyclable cement and solves strength fall problem using micron separator, and does general recyclable cement high quality. As a result of X-ray diffraction(XRD) of rater HR-C than NR-C is aware that it come out the micron-separating to decrease the $SiO_2$-peak below 50%. And a construction field which apply for strength's $24{\sim}28MPa$ HR-C in order to realize NR-C of 44% and 51%. Recycle concrete capacity through improved recycle cement of manufacturing technique by micron-separating's new distribution more better improvement. Therefore, in this study, it need to more various study a recycle cement of high quality for reasonable and utility recycling than disposal concrete.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.25-26
• /
• 2018

Various concrete material technologies and new materials have been developed in accordance with the advancement of buildings. As part of these new technologies, light transparent concrete, which was invented by Hungarian architect Aron Losonczi and attracted worldwide attention, has a technique of arranging optical fiber inside concrete and transmitting the light from exterior to concrete to show silhouette inside. However, due to many disadvantages, application to the field was limited and commercialization was not easy. In Korea, Light Emotion Friendly Concrete has been developed for commercialization. In order to solve the degradation of construction performance caused by the arrangement of expensive optical fiber, which is pointed out as a disadvantage of translucent concrete, It converts expensive fiber into low cost acrylic rod, easy to arrange, pre-assembled to form and post-cast. Therefore, this study aims to improve the mechanical properties of LEFC and to derive optimal combination.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.5 no.1
• /
• pp.81-89
• /
• 2010

Objects : This study was to report a clinical effect of Chuna Treatment for a patient diagnosed by Magnetic Resonance Imaging(MRI) as Cervical Myelopathy. Methods: In order to alleviate shoulder pain and neck stiffness, the patient was treated by acupuncture therapy, herbal medicine, phamacopucture, cervical traction technique of Chuna treatment and conservative managements. To evaluate the effect of the treatment, Recovery rate of Hirabayashi, VAS(Visual Anlaogue Scale), NDI and ROM(Range of Motion) were used. Lhermitte's sign, Valsalva test, Distraction test, Compression test and Spurling test were carried out. Results: VAS, NDI and ROM were improved and Recovery rate was 100%. Conclusions: Korean Treatment can be effectively used for a patient with Cervical Myelopathy. Further clinical studies are needed to verify the findings.