• Journal of Korea Technology Innovation Society
• /
• v.18 no.3
• /
• pp.516-538
• /
• 2015

This study applies policy network theory to examine the main policy actors and their relations in the green growth policy making process. Also the development of and changes in South Korean government's green growth strategy are analyzed. The results demonstrate that the president and the presidential council were the key players to introduce and to push green growth policy in a short time. Policy influence and key roles were concentrated on them. The development of green growth policy were initiated from the president's change in perceived problems and preferences. He set green growth policy on the government's top priority. These changes lead to another changes in strategies, rules, norms and resources within the network. As a result, the president-led green growth policy established new laws, environmental regulations and governmental structures to facilitate the policy implementation. Green growth policy, however, was almost stopped after new presidential election in 2013. Because new government has a different national agenda, the previous governmental agenda lost its status as national priority. In addition, this study shows that government-led green growth in Korea has policy consistency problem after administration was changed by presidential election. Former president-led green growth policy making under the situation of the lack of policy participation from the private sector led to discontinuities in policy after a presidential term was over.

• Resources Recycling
• /
• v.20 no.6
• /
• pp.50-55
• /
• 2011

Using ultrasonic irradiation, the separation and recovery of PV cell, made of silicon wafer, from PV module was carried out through selective decomposition of EVA used as an interlaminated binder. The ultrasonic cleaner of bath-type (Output: 130 W, Frequency: 40 kHz) was used as an ultrasonic apparatus in this research. With the fixed distance of 2 cm, from ultrasonic generator to PV cell, the experiment of EVA decomposition was performed in various organic solvents such as Toluene, Trichloroethylene, O-dichlorobenzene, Benzene. And also their concentrations and temperature was changed to survey the optimum conditions. However EVA can be decomposed perfectly at $55^{\circ}C$ within 160 min in 5 M of all kinds of solvent, PV cell may be recovered with being damaged or broken severely. This damage may be resulted from the swelling of EVA in the process of decomposition. Whereas, at the condition of 5 M at $65^{\circ}C$, PV cell can be recovered with the state of minor damage or crack. This implies that the decomposition rate of EVA increases with an increase of temperature, thereby EVA can be decomposed before the swelling of EVA layer. Conclusively, it is possible for PV cell to be recovered within 40 min, at $65^{\circ}C$ in 5 M, with less damage.

• Journal of Ginseng Research
• /
• v.37 no.1
• /
• pp.124-134
• /
• 2013

The authentication of the physico-chemical properties of ginsenosides reference materials as well as qualitative and quantitative batch analytical data based on validated analytical procedures is a prerequisite for certifying good manufacturing practice (GMP). Ginsenoside Rb1 and Rg1, representing protopanaxadiol and protopanaxatriol ginsenosides, respectively, are accepted as marker substances in quality control standards worldwide. However, the current analytical methods for these two compounds recommended by Korean, Chinese, European, and Japanese pharmacopoeia do not apply to red ginseng preparations, particularly the extract, because of the relatively low content of the two agents in red ginseng compared to white ginseng. In manufacturing fresh ginseng into red ginseng products, ginseng roots are exposed to a high temperature for many hours, and the naturally occurring ginsenoside Rb1 and Rg1 are converted to artifact ginsenosides such as Rg3, Rg5, Rh1, and Rh2 during the heating process. The analysis of ginsenosides in commercially available ginseng products in Korea led us to propose the inclusion of the (20S)- and (20R)-ginsenoside Rg3, including ginsenoside Rb1 and Rg1, as additional reference materials for ginseng preparations. (20S)- and (20R)-ginsenoside Rg3 were isolated by Diaion HP-20 adsorption chromatography, silica gel flash chromatography, recrystallization, and preparative HPLC. HPLC fractions corresponding to those two ginsenosides were recrystallized in appropriate solvents for the analysis of physico-chemical properties. Documentation of those isolated ginsenosides was achieved according to the method proposed by Gaedcke and Steinhoff. The ginsenosides were subjected to analyses of their general characteristics, identification, purity, content quantification, and mass balance tests. The isolated ginsenosides showed 100% purity when determined by the three HPLC systems. Also, the water content was found to be 0.534% for (20S)-Rg3 and 0.920% for (20R)-Rg3, meaning that the net mass balances for (20S)-Rg3 and (20R)-Rg3 were 99.466% and 99.080%, respectively. From these results, we could assess and propose a full spectrum of physico-chemical properties of (20S)- and (20R)-ginsenoside Rg3 as standard reference materials for GMP-based quality control.

• Journal of Korean Medical classics
• /
• v.11 no.1
• /
• pp.361-394
• /
• 1998

Jeon Kwang(癲狂), term of oriental medicine, corresponds to psychopathy. This is recorded in the 22th chapter of Young Chu(靈樞). Jeon and Kwang come under Eum(陰) and Yang(陽) respectively. The symptoms of Jeon have silence, cry and giggle alternately, muttering, and so on. And those of Kwang have quick-tempered, absurd remarks, slander, and so on. The contents of this chapter are divided into three volumes. The first is descriptive of paroxysmal causes and various symptoms of Jean and methods of acupuncture and moxibustion. The second stales causes, symptoms, and remedy methods of Kwang. And the third describes about Pung Youk(風逆), Kweol Youk(厥逆), So Ki(少氣), and Tan Ki(短氣). A paragraph concerning of Mok Ja(目眥), so to speak side of pupil, is mentioned at the begginning of this chapter incomprehensibly. Si Ma(馬蒔) asserted that this one is not a pleonasm because mental condition is seen at Mok Ja. But Sa-Deok Jeong(程士德) decided this one doesn't relation to Jeon Kwang. In my opinion, both views have proprieties. It is in a controversy whether Jeon Kwang has somthing to do with Pung Youk, Kweol Youk, etc. Tan Pa(丹波) asserted that these don't have connection each other. But JI-Chong Jang(張志總) explained Jeon Kwang originates in Kweol Youk with a basis of So Mun(素門). It is difficult to judge which opinion is right, but I am of the opinion that paragraphs of Pung Youk and downward mentioned those of other chapter with a mistake in the process of transcription. On accout of not only shortage contents but also ancient writings of this chapter we cannot understand all about Jeon Kwang. In addition, each woodblock-printed book has different letters and every commentaries aren't the same. Till now, therefore, basic study hasn't been done enough to offer a foundation to the theory of medical treatment. The purpose of this study is to correct wrong letters, to take out right commentaries, and then to interpret the accurat meaning of this chapter. I think this bibliographic study is quite meaningful because of hardship to cure psychopathy in clinic as well as of a viewpoint of basic study. However as this thesis is insufficient, so I expect many studies come out later.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.72-85
• /
• 2019

The goal of this study is to predict sexual violence crimes, which is an routine risk. The study used to the Weight of Evidence on sexual violence crimes that occurred in partly Cheongju-si for five years from 2011 to 2015. The results are as follows. First, application and analysis of the Weight of Evidence that considers the weight of evidence characteristics showed 8 out of total 26 evidences that are used for a sexual violence crimes risk prediction. The evidences were residential area, date of use permission for building, individual housing price, floor area ratio, number of basement floor, lot area, security light and recreational facility; which satisfied credibility in the process of calculating weight. Second, The weight calculated 8 evidences were combined to create the prediction map in the end. The map showed that 16.5% of sexual violence crimes probability occurs in 0.3㎢, which is 3.3% of the map. The area of probability of 34.5% is 1.8㎢, which is 19.0% of the map and the area of probability of 75.5% is 2.0㎢, which is 20.7% of the map. This study derived the probability of occurrence of sexual violence crime risk and environmental factors or conditions that could reduce it. Such results could be used as basic data for devising preemptive measures to minimize sexual violence, such as police activities to prevent crimes.

• Clean Technology
• /
• v.26 no.1
• /
• pp.1-6
• /
• 2020

Rapid expansion of supercritical solution (RESS) process was used to make molsidomine (MOL) loaded peracetyl-β-cyclodextrin (PAc-β-CD) nanoparticles, which were collected into the air. The effect of the concentration of the drug PAc-β-CD (0.5 and 1 wt%), extraction temperature (45 ~ 60 ℃), nozzle length (5 ~ 20 mm) and internal diameter (ID) (50 ~ 150 μm) of a capillary, and spray distance on the particle size and morphology of the resulting particles were investigated. The interaction of a drug and PAc-β-CD was confirmed by ¹H-NMR spectroscopy while the particle size was measured by means of a scanning electron microscope. It was found that increasing the temperature from 45 ℃ to 60 ℃ and decreasing the nozzle diameter from 150 μm to 50 μm had an increasing effect on the average particle size, while increasing the spray distance led to a decrease in the average particle size at a constant pressure of 34.5 MPa and temperature of 45 ℃. With 0.5 wt% of PAc-β-CD, the capillary nozzle of short length (5 mm) and small ID (50 μm) gave the smallest size (165 nm). The obtained nanoparticles showed increased dispersity and solubility in oil. The oil suspension of the inclusion complex showed increased sustainability, which can increase the in-vitro controlled release time of the drug.

• Journal of the Korean Ceramic Society
• /
• v.56 no.2
• /
• pp.178-183
• /
• 2019

A process of fabricating the foamed glass that has closed pores with 8 ~ 580 ㎛ sizes without a blowing agent by sintering 10 ㎛ boron-free glass powder composed of CaO, MgO, SO₃, Al₂O₃-83 wt% SiO₂ at a molding pressure of 0 ~ 120 MPa and a sintering temperature of 750 ~ 1000℃ was investigated. To analyze the glass transition temperature of glass powder, thermogravimetric analysis-differential thermal analysis (TGA-DTA) method were used. The microstructure and pore size of foamed glass were examined using the optical microscopy and field emission scanning electron microscopy (FE-SEM). For the thermal diffusivity and color of the fabricated samples, a heat flow meter and ultraviolet-visible-near-infrared (UV-VIS-NIR)-colormetry were used, respectively. In the TGA-DTA result, the glass transition temperature of glass powder was confirmed to be 626℃. In the microstructure result, closed pores of 7 ~ 20 ㎛ were formed at 750 ~ 900℃, and they were not affected by the molding pressure and sintering temperature. However, at 1,000℃, when there was 0 MPa molding pressure, closed pores of 580 ㎛ were confirmed, and the pore size decreased as the molding pressure increased. Moreover, at a molding pressure of 30 MPa or higher, closed pores of approximately 400 ㎛ were formed. The porosity showed an increasing trend of smaller molding pressure and larger sintering temperature, and it was controllable in the range of 5.69 ~ 68.45%. In the thermal diffusivity result, there was no change according to the molding pressure, and, by increasing the sintering temperature, up to 0.115 W/m·K could be obtained. The Lab color index (CIE-Lab) results all showed a similar translucent white color regardless of molding pressure and sintering temperature. Therefore, based on the foamed glass without boron and blowing agent, it was confirmed that white foamed glass, which has closed pores of 8 ~ 580 ㎛ and a thermal diffusivity characteristic of 0.115 W/m·K, can be fabricated by changing the molding pressure and sintering temperature.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.27-34
• /
• 2004

The study on the RF substrate circuit is necessary to model RF output characteristics of deep submicron MOSFETs below 0.2$\mum$ gate length that have bun commercialized by the recent development of Si submicron process. In this paper, direct extraction methods are developed to apply for a simple substrate resistance model as well as another substrate model with connecting resistance and capacitance in parallel. Using these extraction methods, better agreement with measured Y22-parameter up to 30 GHz is achieved for 0.15$\mum$ CMOS device by using the parallel RC substrate model rather than the simple resistance one, demonstrating the RF accuracy of the parallel model and extraction technique. Using this model, bias and gate length dependent curves of substrate parameters in the RF region are obtained by increasing drain voltage of 0 to 1.2V at deep submicron devices with various gate lengths of 0.11 to 0.5㎛ These new extraction data will greatly contribute to developing a scalable RF nonlinear substrate model.

• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.158-164
• /
• 2007

In this study, three types of a novel Trench IGBTs(Insulated Gate Bipolar Transistor) are proposed. The first structure has P-collector which is isolated by $SiO_2$ layer to enhance anode-injection-efficiency and enable the device to have a low on-state voltage drop(Von). And the second structure has convex P-base region between both gates. This structure may be effective to distributes electric-field crowded to gate edge. So this structure can have higher breakdown voltage(BV) than conventional trench-type IGBT(TIGBT). The process and device simulation results show improved on-state, breakdown and switching characteristics in each structure. The first one was presented lower on state voltage drop(2.1V) than that of conventional one(2.4V). Also, second structurehas higher breakdown voltage(1220V) and faster turn off time(9ns) than that of conventional structure. Finally, the last one of the proposed structure has combined the two structure (the first one and second one). This structure has superior electric characteristics than conventional structure about forward voltage drop and blocking capability, turnoff characteristics.

• Journal of the Korean Chemical Society
• /
• v.38 no.4
• /
• pp.309-318
• /
• 1994

The stable defect structure and the single phase region of La$_2O_3$-modified BaTi$O_3$ have been studied by X-ray diffractometer and scanning electron microscope. The stable defect structure of La$_2O_3$-modified BaTi$O_3$ has been identified as [($Ba^x_{Ba})_{1-2x}(La{\cdot}_{Ba})_{2x}][Ti^x_{Ti})_{1-x/2}(V""_{Ti})_{x/2}]O_3$ which consists of La$^{3+}$ ion substitution for Ba$^{3+}$ ion in the lattice structure and the formation of Ti vacancies for the charge compensation. When 3 mol% of La$_2O_3{\cdot}3/2TiO_3$ was added to BaTi$O_3$, the unit cell structure was transformed from tetragonal to cubic and the solubility limit was about 14 mol%. When La$_2O_3{\cdot}3/2TiO_2$ was added above this solubility limit, the second phase, La$_4Ba_2Ti_5O_{18}$, was formed. In the La$_2O_3$-modified BaTi$O_3$, it was found by the liquid phase sintering process that the sinterability was decreased by excess BaO but increased by excess Ti$O_2$.