• The Journal of the Korea Contents Association
• /
• v.9 no.9
• /
• pp.1-8
• /
• 2009

H.264/AVC video coding standard uses the rate distortion optimization method which determines the best coding mode for macroblock(MB) to improve coding efficiency. Whereas RDO selects the best coding mode, it causes the heavy computational burden comparing with previous standards. To reduce the complexity, in this paper, a fast intra prediction mode decision algorithm using directional gradients is proposed. The proposed algorithm is composed of 2-path structure. In the first path, $16{\times}16$ intra prediction mode is determined using directional gradients. In the second path, 3 modes instead of 9 modes are chosen for RDO to decide the best mode for $4{\times}4$ block. Finally, the two modes determined in the two-path decision process are compared to decide the final block mode. Experimental results show that the computation time of the proposed method is decreased to about 77% of the exhaustive mode decision method with negligible quality loss.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.268-268
• /
• 2015

하천법 제66조에서 지자체는 하천에서 생기는 수익금을 하천의 유지 보수에 관한 비용에 사용해야 한다고 규정하고 있고, 동법 시행령 제77조에서 하천 수익금은 하천의 유지 보수를 위해 우선적으로 사용해야 한다고 규정하고 있다. 하천 수익금은 법에서 규정한바와 같이 하천관리를 위해 사용되어야 하지만 건설교통부에서 제공한 2003년도 자료를 분석한 결과 하천과 관련된 용도로 사용된 하천수익금은 30%만 사용되고 있었다. 하천 수익금은 하천의 유지 보수에 우선순위로 사용해야 함에도 불구하고 현재 지자체의 하천 관리에 소요되는 비용을 구체적으로 파악하기 어려운 실정이다. 따라서 본 연구는 지역 내 물 관리 및 재정 관리를 구축하고 있는 네덜란드의 사례를 통하여 국내 하천 유지 보수를 위한 재정확보 도입 방안을 도출하였다. 네덜란드는 지역의 55%가 해수면 아래에 위치한 저지대 국가로 기후변화의 적응을 위해 각 지역별 물 기구는 물 관리를 위한 재정확보로서 독자적인 세금시스템을 구축해왔다. 본 연구는 먼저 네덜란드의 하천관리 측면의 물 기구의 정책방향, 중점추진과제 등의 여건을 살펴봄으로써 네덜란드의 물 관리 방향을 조사하였다. 이를 통해 (1)물 관리 업무에 쓰인 네덜란드 정부 지출 내용 (2)네덜란드 물 관리 기구 법제분석 (3)네덜란드 물 관리 주관 기관 및 재정 조달 방식을 구분할 수 있었다. 또한 국내 하천 수익금 징수 체계와 네덜란드 징수체계를 비교 분석하였다. 비교분석 결과 우리나라와 달리 네덜란드 물기구의 시스템은 중앙정부와 별도로 독립적인 세금시스템을 갖춰 독자적인 하천관리유지가 가능하였다. 이는 지역별 물 기구가 세금을 토대로 물 관리를 위한 금융기관을 설립함으로써 물 관리 재정문제를 해결하고 있기 때문이다. 이는 물 관리를 위한 재원 확보를 위해 네덜란드가 지자체 중심의 물관리가 정착되는 모범적인 사례를 보여주고 있다는 점을 파악할 수 있다. 본 연구를 통하여 네덜란드의 사례를 통해 국내의 재정확보 방안을 위한 방향성을 도출하였다. 네덜란드의 사례는 물 관리의 확보를 위해 자체 금융기관을 설립하여 재원조달을 성공했다는 점에서 국내 하천의 관리 유지 재원조달에 관한 새로운 관점을 시사한다. 국내 하천의 관리유지 재원조달에 대한 논의가 지속되고 있으므로 네덜란드 사례는 향후 우리나라의 하천 관리유지를 위한 재원조달의 제도적 기반을 구축하기 위한 기초 조사로 활용되어 질 것으로 기대한다.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.11
• /
• pp.29-38
• /
• 2010

The steel pipe of steel-concrete composite piles increases the pile strength and induces the ductile failure by constraining the deformation of the hiller concrete. In this research, the load-movement relations and the reinforcement effect by the outer steel pipe in the steel-concrete composite pile were analyzed by performing three-dimensional numerical analyses, which can simulate the yielding behavior of pile material and the elasto-plastic behavior of soils. The parameters analyzed in the study include three pile materials of steel, concrete and composite, pile diameter, pile distance and loading direction. The results showed that the axial capacity of the composite pile was about 90% larger than that of the steel pipe pile while similar to that of the concrete pile. At the allowable movement criteria, the horizontal capacity of the composite pile was about 50% lager than that of the steel pile and about 22% larger than that of the concrete pile.

• Journal of the Korean earth science society
• /
• v.43 no.5
• /
• pp.618-638
• /
• 2022

The Middle Jurassic granite dike swarm intruding into the Paleoproterozoic banded gneiss is pervasively observed in Ueumdo, Hwaseong City, mid-western Gyeonggi Massif. Based on their cross-cutting relationships in a representative outcrop, there are four dikes (UE-A, UE-C, UE-D, UE-E), and depending on the direction, there are three granite dike groups, which are NW- (UE-A dike), NW to WNW- (UE-C dike), and NE-trending (UE-D and UE-E dikes). These granite dikes are massive, medium-to coarse-grained biotite granites, and their relative ages observed in outcrops are in the order of UE-A, UE-D (=UE-E), and UE-C. The geometric analysis of the dikes indicates that the UE-A and UE-C dikes intrude under approximately NE-SW trending horizontal minimum stress fields. The UE-A dike, which showed a relatively low average SiO2 content by major element analysis, is a product of early magma differentiation compared to other dikes; therefore, it is consistent with the relative age of each dike. The ²⁰⁶Pb/²³⁸U weighted mean ages for each dike obtained from SHRIMP zircon U-Pb dating were calculated to be 167 Ma (UE-A), 164 Ma (UE-C), 167 Ma (UE-D), and 167 Ma (UE-E), respectively. The samples of the UE-A, UE-D, and UE-E dikes showed very similar ages. The UE-C dike shows the youngest age, which is consistent with the results of the relative age in the outcrops and major element analysis. Therefore, the granite dikes intruded into the Middle Jurassic (approximately 167 and 164 Ma), coinciding with those of the Gyeonggi Massif, where the Middle Jurassic plutons are geographically widely distributed. This result indicates that the wide occurrence of the Middle Jurassic plutons on the Gyeonggi Massif was formed as a result of igneous activity moving in the northwest direction with the shallower subduction angle of the subducting oceanic plate during the Jurassic.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.258-265
• /
• 2009

An anionic polyurethane dispersions (PUDs) were synthesized from the poly (tetramethylene glycol) (PTMG, Mw = 2000 g/mol), mixed isocyanate of dicyclohexylmethane-4,4'-diisocyanate $(H_{12}-MDI)$ and 4,4'-diphenylmethane diisocyanate (MDI), and dimethylol propionic acid (DMPA) as anionic site, following a prepolymer mixing process. Triethylamine (TEA) was used as a neutralization agent and the ethylenediamine (EDA) as the chain extender of the prepolymer. The effects of the DMPA molar ratio and aromatic diisocyanate content in the mixed isocyanate on the particle size and viscosity of PUD were studied. Also, the mechanical and thermal properties of the PUD cast films were discussed according to the molar ratio of DMPA and aromatic isocyanate content. It was found that the particle size and the viscosity of an anionic PUD decreased with increasing DMPA molar ratio but increased with increasing aromatic isocyanate (MDI) content in the mixed isocyanate at the constant DMPA content. Tensile strength of the PUD cast films increased and elongation at break decreased with increasing DMPA content at the constant mixed isocyanate molar ratios. In thermal degradation temperature of PUD cast films, the effect of DMPA contents was great but the effect of aromatic isocyanate contents at the low DMPA content was very slight respectively.

• The Journal of Engineering Geology
• /
• v.11 no.3
• /
• pp.303-313
• /
• 2001

A cut-slope near Guam-Ri Hwado-Eup Namyangju-Si Kyunggi-Do collapsed during a heavy rainfall over 400mm at 28th of August 2000. The cut-slope collapse reportedly developed mainly by block sliding along a set of discontinuities, although slope angle of the cut-slope was 40$^{\circ}$(1:1.2) that agrees with the road construction criteria. This study aims to analyze differences and correlations among several data-collecting methods limited to discontinuity analysis related with cut-slope collapse. This study started with analysing discontinuity surface characteristics, geology of the country rock and orientations of the discontinuities directly related with the collapse. Analysis of aerial photos around the study area provided regional lineament data, and discontinuity plane description and measurements were collected from core logging and Borehole Image Processing System (BIPS). Spearmans correlation ranking coefficient method was used to get correlation of discontinuity planes according to analysis methods. The result suggests that the correlation coefficient is ${\gamma}_s$ = 0.91 Plus, stability analysis of discontinuity plane orientation data using equal-area stereonet revealed that the study area is unstable to planar failure. This study suggests that the cut-slope angles currently applied should be shallower and that significant attention is required to orientation distribution of discontinuities existed in cut-slopes studies.

• Smart Media Journal
• /
• v.10 no.2
• /
• pp.61-69
• /
• 2021

Wayfinding is a 'Process solving problem to find destination', and it is important to select spatial data for optimal way. Recently, due to the complexity of space and the expansion of the medium of the wayfinding service, it is necessary to the approach on the information design for them. Therefore, the purpose of this study is to propose a meta guideline on the information design for the design of orientation sign, which is an important cognitive clue in the wayfinding. It was conducted in 3 stages, First, a design process was proposed and design elements were derived for each step by literature research related to information and sign design, and analysis of manual for signage design. Second, a meta guideline for information organization and visualization in the three-stage design process was proposed by FGI and analysis. Third, the meta guideline was applied to the sign design on an area for user evaluation to inspect the applicability of the meta guideline. Through the user questionnaire, the possibility of applying the guideline for visualization of directions and spaces, information hierarchy according to spatial characteristics and information priority was identified. It is meaningful in that necessary element for signage design are systematized centering on the process and that it presents a macroscopic methodology according to spatial characteristics.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6C
• /
• pp.267-275
• /
• 2009

The steel pipe of steel-concrete composite piles increases the pile strength and induces the ductile failure by constraining the deformation of the inner concrete. In this research, the load-movement relations and the reinforcement effect by the outer steel pipe in the steel-concrete composite pile were analyzed by performing three-dimensional numerical analyses, which can simulate the yielding behavior of the pile material and the elasto-plastic behavior of soils. The parameters analyzed in the study include three pile materials of steel, concrete and composite, pile diameter and loading direction. As the results, the axial capacity of the composite pile was 1.9 times larger than that of the steel pipe pile and similar with that of the concrete pile. At the allowable movement criteria, the horizontal capacity of the composite pile was 1.46 times larger than that of the steel pile and 1.25 times larger than that of the concrete pile. In addition, the horizontal movement at the pile head of the composite pile was about 78% of that of the steel pile and about 53% of that of the concrete pile, which showed that the movement reduction effect of the composite pile was significant and enables the economical design of drilled shafts.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.49.1-49.1
• /
• 2010

본 연구에서는 증착법에 의해 제조된 다결정 실리콘을 이용한 태양전지 제작과 관련하여 다결정 실리콘 씨앗층 제조를 위한 기판에 대하여 연구를 수행하였다. 다결정 실리콘 씨앗층을 제조할 수 있는 기술중 aluminum-induced layer exchange(ALILE) 공정을 이용하여 다결정 실리콘 씨앗층을 제조하였다. glass/Al/oxide/a-Si 구조로 알루미늄과 비정질 실리콘 계면에 알루미늄 산화막을 다양한 두께로 형성시켜, 알루미늄 유도 결정화에서 산화막의 두께가 결정화 특성에 미치는 영향, 결정결함, 결정크기에 대하여 연구하였다. 형성된 다결정 실리콘 씨앗층 막의 특성은 OM, SEM, FIB, EDS, Raman spectroscopy, XRD, EBSD 을 이용하여 분석하였다. 그 결과 산화막의 두께가 증가할수록 결함도 함께 증가하였다. 16nm 두께의 산화막 구조에서 <111> 방향의 우선배향성을 가진, $10{\mu}m$의 sub-grain 결정립을 갖는 씨앗층을 제조 하였다.

• Electronics and Telecommunications Trends
• /
• v.31 no.6
• /
• pp.1-12
• /
• 2016

GaN 전력반도체는 와이드 밴드갭(Eg=3.4eV)과 높은 이동도 및 낮은 온-저항 특성으로 인하여 차세대 고속/저손실 고효율 전력반도체 소자로서 각광을 받고 있다. 그럼에도 불구하고 글로벌 GaN 전력반도체 기술개발과 상용화는 초기단계로 선진업체 캐치업과 추월이 가능한 분야이다. GaN 반도체의 재료적 장점과 현재 상용화된 200V 이하급과 650V급 GaN 전력반도체 소자의 글로벌 시장동향으로 볼 때 고속 스위칭과 전력모듈 소형화 및 시스템의 고효율화를 요구하는 제품응용에 특화해야할 것으로 판단된다. 특히 기존 Si 전력반도체 대비 고성능 GaN 제품의 저가격화뿐만 아니라 선진기업과의 경쟁력 확보를 위하여 6인치 기반 Au-free CMOS 호환 공정 개발을 통한 GaN 전력반도체 기술의 국산화와 신시장 선점을 위한 조기 상용화의 중요성을 강조하고자 한다.