• Journal of Korean Medicine Rehabilitation
• /
• v.20 no.1
• /
• pp.79-90
• /
• 2010

Objectives : Tai Chi for arthritis was developed in 1997 by Paul Lam, M.D. of family medicine in Australia. It is an exercise treatment program and a good approaching method for arthritis. However its application is limited to arthritis of knee joint only. Even there have been no clinical study in korean traditional medical society. The aim of this study is to investigate effect of the Tai Chi for arthritis on chronic pain of body. Methods : We designed this trial as objectives were (1) senior female over 60 years, (2) suffering for osteoarthritis and chronic body pain, (3) have no physical or mental dysfunctions (4) able to walk and exercise alone. Objectives mactched these criteria had been trained the Tai Chi for arthritis 2 hours a day for 21 weeks. Before and after training, pain of 8 joints (neck, shoulder, elbow, wrist, waist, hip, knee, ankle) were estimated with the VAS(Visual Analog Scale). Results : Training the Tai Chi for arthritis relieved multiple joint pain(especially neck, lower back, shoulder, wrist and knee) and these were statistically significant. Conclusions : This study is a pilot study to investigate effect of the Tai Chi for arthritis on chronic pain of whole body. Absence of control group, and other scale to test joint function except VAS were limitations of this study. It is the first clinical approach about Tai Chi in korean medicine field, also the first study of Tai Chi for pain of the whole body.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.1
• /
• pp.104-111
• /
• 2009

This paper shows the behaviors of macro- and micro-structures and mechanical properties for specimen's welding region welded by FSW. according to welding conditions with 5mm thickness aluminum 5083O alloy plate. It apparently results in defect-free weld zone in case traverse speed was changed to 32 mm/min under conditions of anti-clockwise direction and tool rotation speed such as 800 and 1250 rpm with tool's pin diameter of 5 ${\Phi}mm$ and shoulder diameter of 20 ${\Phi}mm$, pin length of 4.5 mm and tilting angle of $2^{\circ}$. The ultimate stress of ${\sigma}_T=331$ MPa and the yield point of 147 MPa are obtained at the condition of the travel speed of 32 mm/min with the tool rotation speed of 1250 rpm. There is neither voids nor cracks on bended surface of $180^{\circ}$ after bending test. The improvement of toughness after impact test was found. The lower rotating and traverse speed became, the higher were yield point, maximum stress and elongation(%) with the stresses and the elongation(%) versus the traverse speed diagram. Vickers hardness for cross section of welding zone were also presented. The typical macro-structures such as dynamically recrystallized zone, thermo-mechanically affected zone and heat affected zone and the micro-structures of the transverse cross-section were also showed. However, the author found out that the region of 6mm far away from shoulder circumference was affected by friction heat comprehensively, that is, hardness softened and that part of micro-structures were re-solid-solution or recrystallized, the author also knew that there is no mechanically deformation on heat affected zone but there are the flow of plastic deformation of $45^{\circ}$ direction on thermo-mechanically affected zone and the segregation of Al-Mg on nugget. The solid solution wt(%) of parent material as compared against of friction stir welded zone was comprehensively changed.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.1
• /
• pp.221-235
• /
• 2005

The purpose of this study was to analyse badminton players' drop-shots, in order' to make players understand the principles of drop-shot motion in badminton. Three dimensional analysis was used to measure movements such as the time required per section, the change of center of gravity, joint angle and speed, and joint speed. The results of this study revealed as follows: (1) top players are faster than amateurs in the total time required per section; (2) top players moved more in the x-axis and z-axis, while amateurs moved more in the y-axis; (3) the inclination of amateurs was greater than that of top players in all phases; (4) amateurs showed larger angle on the shoulder joints than top players in the first phase, while top players showed larger angle on the shoulder joint than amateurs in the second and third phase. Amateurs' angle was larger on angle joint in the first phase than top players' ones, while top players' angle was larger in the third phase than amateurs; (5) the speed of racket head of top players was faster than that of amateurs; and the velocity of the center of gravity of amateurs was greater than that of the top players. The findings of this study were that gravity decreases during impact and then the velocity increases to perform the follow-through and making the swing fast by increasing the speed of the racket head is most important.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.265-276
• /
• 2003

The objective of this research is to provide basic data for improving athletic performances, suggesting methods that can be utilized at games and coaching movements in the snatch, by analyzing the level of contribution of muscles to the movements of the snatch lift through three-dimensional imaging and EMG analysis between skilled and unskilled lifters. To this end, three high school students (the skilled group), three middle school student (the unskilled group) were selected; two digital video cameras and electromyography were used. The muscles measured by an EMG include gastrocnemius muscle, biceps femoris muscle, erector spinae, latissimus dorsi muscle, trapezius muscle, and brachioradialis. Based on the Ariel Performance Analysis System (APAS) program, the results of the analysis are summarized as follows. 1. In performing snatch pulls, the skilled lifters were found to simultaneously move the weight centers of the body and the barbell close to vertical, close to the shoulders in the pulling portion; in snatching and grabbing the barbell from a sited position, it was observed that the shorter the time for adjusting to change in the height of the barbell by using rotational inertia, the better it is to perform the movements. 2. The skilled lifters were observed to perform stable and efficient movements in grabbing the bar in a sited position, by moving the barbell and weight center of the body close to vertical and moving the shoulder joint under the bar fast. 3. The results of the EMG analysis of the entire movements from the snatching portion to the portion of grabbing the bar in a sited position show that when the skilled lifters lifted the barbell vertically during the pulling portion, their shoulder joints were extended to put more weight on biceps femoris muscle and brachioradialis; and in snatching and grabbing the bar from a sited position, it was found desirable to increase the myoelectrical activity of erector spinae in order to achieve a balance in the movements of the hip joint between font and rear, as the weight centers of the body and the barbell move higher. On the other hand, the unskilled lifters were found that in response to change in posture, they increase their muscular strength inefficiently in performing the movements throughout the entire lifting process.

• Progress in Medical Physics
• /
• v.2 no.2
• /
• pp.161-173
• /
• 1991

A statistical approach was carried out to analyze joint moments acting on the six subjects performing a right-handed seated task. The dynamic task analyzed consisted of moving a hand-held weight of lkg mass back and forth in front of a subject's chest at the shoulder level in an upright seated position. We used experimental data obtained in the Biomechanics Laboratory of the University of Michigan. Based on the acquired data from three trials by each subject, moments were calculated using a 3-dimensional biomechanical model at such articulations as wrist, elbow, shoulder, the third lumbar spine, hip, knee, and ankle joints. The linear correlation and the two way analysis of variance were applied to the calculated joint moments in order to investigate inter-subject and inter-trial varations. The results obtained showed that the largest magnitude and deviation of moment was found at the third lumbar spine, that any linear relationship could not be found between moment and its equivalents attempted in this study, and that the maximum value and deviation of moment acting on each joint were statistically the same for all three trials but those were statistically not the same for all six subjects.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.4
• /
• pp.61-71
• /
• 2006

The purpose of this study was to compare kinematic characteristics on the limbs at 3 different walking speed during the energy and the normal walking. Eight subjects performed energy walking and normal walking at the slow speed(65 beats/min), the normal speed(115beats/min), the fast speed(160 beats/min). The 3-d angle was calculated by vector projected with least squares solution with three-dimensional cinematography(Motion Analysis corporation). The range of motion was calculated on the trunk, shoulder, elbow, hip, knee joint. The results showed that stride length was no difference of the two walking pattern. The duration of support phase was also no difference of the two walking pattern. The range of motion of shoulder joint significantly increased in the sagittal and frontal planes, and the range of motion of elbow joint significantly increased as the energy walking. The range of motion of hip joint had no significant difference in the any planes in changing of walking speed. But the most remarkable difference of the two walking patterns revealed at the trunk. The range of flexion/extension angle had significant increasing $2.36^{\circ}$ at normal speed, and the range of the right/left flexion angle had significant increasing below $4^{\circ}$ at the 3 walking speed, and The range of rotation angle had significant increasing $7.35^{\circ}$, $9.22^{\circ}$, respectively at the normal and slow speed. But there was no significant difference of range of motion at the hip and knee joints between energy walking and normal walking.

• Journal of Acupuncture Research
• /
• v.24 no.6
• /
• pp.187-193
• /
• 2007

Objectives : The objectives of this study were to investigate the relationship between electrical detection of ear acupuncture points and musculoskeletal pain. Methods : 18 adults who have musculoskeletal pain without trauma factorsparticipated in this study. They answered the questionnaire and their ear acupuncture points were examined with electrical detectors. We analyzed the relationship between electrical detection of ear acupuncture points and musculoskeletal pain with concordance rate and validity. Results : Total concordance rates of the head region was 68.00%(questionnaire) 32.08%(investigation), that of vertebral region was 67.86%, 59.38%, that of both upper limbs was 86.67%, 39.69%, and that of both lower limbs was 50.00%, 23.46%. The true positive rate was 0.704, the true negative rate was 0.492, the false positive rate was 0.508, and the false negative rate was 0.296 in the validity test. In the head, two concordance rates of the temporal and occipital regions were relatively higher than those of the parietal and frontal regions. In the vertebral region, two concordance rates of the cervical and lumbar regions were relatively higher than those of the thoracic and sacrum regions. In the upper limb, two concordance rates of the shoulder and shoulder joints were relatively higher than those of the others. In the lower limb, concordance rates of investigation were relatively low at all areas. The right lower limb was relatively higher than the left in concordance rates of the questionnaire. Conclusions : The results suggest that electrical detection of ear acupuncture points can be used in the diagnosis and treatment of musculoskeletal pain.

• Journal of the Korean Arthroscopy Society
• /
• v.16 no.2
• /
• pp.175-179
• /
• 2012

Synovial chondromatosis developes by metaplasia of synovial cell into chondroblast in synovium of joint. It most commonly involves large joints such as knee or hip, and rarely occurs in shoulder joint. It is often difficult to be diagnosed preoperatively and surgical synovectomy is known to be effective treatment. We encountered a case of synovial chondromatosis with hyaline cartilage forming loose body in subacromial and subdeltoid synovium on the shoulder of a 44-year old female suffered by pain and discomfort. The authors report this case with a review of the relevant literature.

• Clinics in Shoulder and Elbow
• /
• v.13 no.2
• /
• pp.266-269
• /
• 2010

Purpose: We report case of neglected elbow dislocation for three years. Material and method: A 45 years old female patient presented with neglected elbow dislocation for three years. Since the patient had contracture in both lateral and medial collateral ligament of elbow, dissection was done. After total separation of posterior articular capsule and incision of anterior articular capsule, by manual manipulation, reduction of radiohumeral and ulnohumeral joints were obtained. We applied modified Morrey type hinged external fixation in the elbow and done early elbow exercise. Result and Conclusion: Since we have experienced a satisfactory result in the case with neglected elbow dislocation for 3 years by using open reduction and hinged external fixation, we report it with the literature.

• Korean Journal of Applied Biomechanics
• /
• v.32 no.4
• /
• pp.128-133
• /
• 2022

Objective: This study was executed to compare and analyze shoulder muscle activation while using an inelastic bar and elastic bar during overhead press exercise. The stability and coordination of shoulder joints will be investigated by measuring and analyzing the EMG of the upper and lower arm muscles. Method: A total of 20 university male students were recruited by dividing into 2 groups; 10 elastic bar participants (age: 20.17 ± 0.41 yrs, height: 174.31 ± 3.34 cm, weight: 74.68 ± 5.65 kg) and 10 inelastic bar participants (age: 20.09 ± 0.23 yrs, height: 173.53 ± 4.11 cm, weight: 75.32 ± 3.31 kg) participated in this study. Results: The EMG analysis results of the four muscles measured in this study showed that there was no difference between the left and right muscles between the groups in Upper Trapezius muscle. In Deltoid, Infraspinatus, and Rectus Abdominis muscles, the elastic bar group was significantly higher than the inelastic bar group between groups, and there was no difference between left and right. Conclusion: Among the four muscles measured in this study, there was no difference between left and right in Deltoid, Infraspinatus, and Rectus Abdominis, but the elastic bar showed significantly higher muscle activity than the inelastic bar. Therefore, it was found that the elastic bar increases muscle activation during exercise than the inelastic bar, and in particular, it further increases muscle activation of the arms and torso, and exercise using the elastic bar can increase neuromuscular stabilization.