• 콘크리트학회지
• /
• 제10권6호
• /
• pp.179-190
• /
• 1998

철근콘크리트보의 전단파괴는 급작스런 취성파괴 때문에 중요한 문제이며, 많은 실험결과들에 의하면 철근콘크리트 보의 전단강도에서의 크기효과는 철근콘크리트 부재의 중요한 특징임이 밝혀졌다. 철근콘크리트보의 크기가 점점 커짐에 따라 실험이 매우 어려워져 전단강도에대한 실험데이타나 경험공식을 얻기가 힘들어지며 이에 다른 철근콘크리트 보의전단강도의 크기효과에 대한 수치해석적 방법이 매우 중요하게 되었다. 본 연구에서는 스터럽이 없는 철근콘크리트보의 전단해석에 유한요소해석기법을 적용하였고 전단강도에대한 크기효과를 해석적으로 분석하였다. 또한 철근콘크리트 보의 전단강도에대한 크기효과에 영향을 주는 인자를 분석하였으며 영향인자를 몇몇 표준시방서를 포함한 주요 전단강도식과 비교하였다.

• 한국공간구조학회논문집
• /
• 제15권2호
• /
• pp.69-77
• /
• 2015

Ultra High Performance Fiber Reinforced Concrete (UHPFRC) has a outstanding tensile hardening behaviour after a crack develops, which gives ductility to structures. Existing shear strength model for fiber reinforced concrete is entirely based on crack opening behavior(mode I) which comes from flexural-shear failure, not considering shear-slip behavior(mode II). To find out the mode I and mode II behavior on a crack in UHPFRC simultaneously, maximum shear strength of cracked UHPFRC is investigated from twenty-four push-off test results. The shear stress on a crack is derived as variable of initial crack width and fiber volume ratio. Test results show that shear slippage is proportional to crack opening, which leads to relationship between shear transfer strength and crack width. Based on the test results a hypothesis is proposed for the physical mechanics of shear transfer in UHPFRC by tensile hardening behavior in stead of aggregate interlocking in reinforced concrete. Shear transfer strength based on tensile hardening behavior in UHPFRC is suggested and this suggestion was verified by comparing direct tensile test results and push-off test results.

• Computers and Concrete
• /
• 제27권5호
• /
• pp.473-487
• /
• 2021

The review of the literature and design guidelines indicates a lack of design codes governing the shear strength of reinforced concrete (RC) beams strengthened with ultrahigh-performance fiber-reinforced concrete (UHPFRC). This study uses the results of a 3D finite element model constructed previously by the authors and verified against an experimental programme to gain a clear understanding of the shear strength of RC beams strengthened with UHPFRC by using different schemes. Experimental results found in the literature along with the numerical results for shear capacities of normal-strength RC and UHPFRC beams without stirrups are compared with available code design guidelines and empirical models found in the literature. The results show variance between the empirical models and the experimental results. Accordingly, proposed equations derived based on empirical models found in the literature were set to estimate the shear capacity of normal-strength RC beams without stirrups. In addition, the term 'shear span-to-depth ratio' is not considered in the equations for design guidelines found in the literature regarding the shear capacity of UHPFRC beams without stirrups. Consequently, a formula estimating the shear strength of UHPFRC and RC beams strengthened with UHPFRC plates and considering the effect of shear span-to-depth ratio is proposed and validated against an experimental programme previously conducted by the authors.

• Journal of the Korean Wood Science and Technology
• /
• 제49권4호
• /
• pp.336-359
• /
• 2021

본 연구는 고층 목조건축에 사용되는 대형 목재 패널인 CLT의 낮은 rolling shear strength를 개선하기 위해 hybrid CLT의 연구 개발 동향을 분석하였다. 이를 통해 CLT의 국산화를 위한 연구개발 방향에 활용 가능한 기초자료를 마련하고자 하였고, 낮은 rolling shear strength를 향상시키기 위한 방안으로 활엽수 층재 사용, 층재 배열 각도 변화, 구조용 목질복합체의 사용이 주를 이루고 있다. 활엽수 층재는 침엽수 보다 rolling shear strength와 shear modulus 모두 2배 이상의 높은 값을 나타내므로 활엽수 층재 사용 및 미이용 수종의 활용이 가능함을 확인하였다. 층재 배열 각도 변화에 따라 rolling shear stength 1.5배, shear modulus 8.3배, bending stiffness 4.1배 향상되어 층재 배열 각도를 감소시킴으로써 CLT 강도 향상을 확인하였다. 구조용 목질재료는 기존에 강도성능이 확보된 재료로 층재로 사용하였을 때 최대 MOR 1.35배, MOE 1.5배, rolling shear strength 2배 향상되었고, 층재 간의 접착강도 또한 집성재 블록전단강도 기준인 7.0 N/mm²을 확보할 수 있었다. 선행연구결과를 통해 MOE 7.0 GPa, MOR 40.0 MPa 이상의 휨 특성을 가진 구조용 목질재료를 사용하였을 때 강도성능이 향상됨을 확인하였다. 이를 통해 구조용 목질재료 층재 강도 기준으로 판단하였다. rolling shear strength 개선하기 위한 최적의 방법은 기존 규격에 의한 강도값을 가진 구조용 목질재료의 적용이 가장 유리할 것으로 판단하나, 구조용 목질재료의 섬유 배열에 따른 CLT 층재 배열 방향, 층재 간 접착 강도 등에 대한 추가적인 연구가 필요하다.

• 한국강구조학회 논문집
• /
• 제9권2호통권31호
• /
• pp.277-285
• /
• 1997

접합부 패널존의 거동에 영향을 줄 수 있는 변수를 고려하여 SRC 기둥-H형강보 접합부의 역학적 특성에 대해 실험적 연구를 하였다. 7개의 시험체를 제작하여 실험을 수행하였으며 실험으로부터 접합부의 전단강도와 이력거동을 조사하였고 파괴형태에 대하여 분석하였다. 접합부의 이력거동은 약간의 핀칭을 보이는 안정된 거동을 보였다. 이력거동은 최대하중에 도달한 후 변위를 증가할 때 내력이 감소하는 거동을 보였다. 접합부 패널존의 전단강도는 접합부내의 콘크리트 유효면적이 증가함에 따라 증가함을 보였다. 접합부 패널존의 전단강조는 철골기둥 웨브의 항복강도, 패널존내의 철골기둥 플랜지의 소성휨강도 그리고 유효콘크리트의 전단강도의 합으로 표현되며 실험결과는 이러한 접합부의 전단강도와 근사한 값을 보였다.

• 한국지반환경공학회 논문집
• /
• 제13권11호
• /
• pp.51-60
• /
• 2012

동토지반의 기초구조물을 설계하는데 있어 기초의 안정성을 지배하는 설계정수인 동결토의 전단강도 및 동착강도를 측정하기 위하여 지난 50여 년 동안 많은 연구가 수행되어 오고 있다. 하지만, 아직까지 동결토의 전단강도 특성에 관한 많은 연구들은 토사 종류, 수직구속응력, 동결온도조건 등 여러 가지 영향인자 중 제한된 영향인자의 변화를 통해 수행되어 왔다. 동결토는 일반 토질과는 달리 토립자, 물, 공기뿐만 아니라 얼음을 포함한 4상으로 구성되어 있으며, 동토의 역학적인 성질의 변화는 일반적으로 온도, 수직구속응력, 동토의 구성물질에 따라 영향을 받는다. 이와 같은 동결토의 전단강도 특성을 측정하기 위하여 영하 30도의 저온환경에서도 동작이 가능하도록 설계된 동결토 직접전단시험기를 활용하였으며, 동토지역의 저온환경을 모사하기 위하여 대형 냉동챔버 내에 직접전단시험기를 설치하였다. 동결토의 전단강도 특성을 측정하기 위하여 비교적 균질한 입경분포를 지닌 주문진표준사 및 실리카모래와 입도분포가 좋은 화강풍화토를 활용하였다. 각각 세가지 시료에 대하여 전단시험은 세가지 동결온도 조건 및 수직구속응력 조건에서 수행되었으며, 그 결과를 바탕으로 동결온도조건 및 수직구속응력이 동결토의 전단강도에 미치는 영향을 분석하였다. 전반적으로 동결토의 전단강도는 동결온도가 낮아질수록 증가하는 경향을 보였으나, 수직구속응력에 의한 영향은 미미한 것으로 나타났다.

• 한국안전학회지
• /
• 제30권5호
• /
• pp.67-73
• /
• 2015

In this paper, the simple truss model was modified to predict the punching shear strength of long-span prestressed concrete (PSC) deck slabs under wheel load including the effects of transverse prestressing and long span length between girders. The strength of the compressive zone arounding punching cone was evaluated by the stiffness of inclined strut which was modified by considering aging effective modulus. The stiffness of springs which control lateral displacement of the roller supports consists of the steel reinforcement and prestressing which passed through the punching cone. Initial angle of struts was determined by the experimental observation to compensate for uncertainties in the complexities of the punching shear. The validity of computed punching shear strength by modified simple truss model was shown by comparing with experimental results and the experimental results were also compared with existing punching shear equations to determine level of predictability. The modified simple truss model appeared to better predict the punching shear strength of PSC deck slabs than other available equations. The punching shear strength, which was determined by snap-through critical load of modified simple truss model, can be used effectively to examine punching shear strength of long span PSC deck slabs.

• 대한치과기공학회지
• /
• 제38권4호
• /
• pp.291-298
• /
• 2016

Purpose: This study was to evaluate the effect of coloring liquids on the shear bond strength between zirconia and veneering ceramic. Methods: Zirconia(15 mm in diameter, 2.5 mm in thickness; n=40) used in the experiment were divided into 5 groups depending on the coloring liquid. Each specimen were polished using a polishing machine(LaboPol-2, Struers, UK). A cylinder of veneering porcelain(6 mm in diameter, 3 mm in thickness) was fabricated and fired on zirconia surfaces. The shear bond strength was measured using a universal testing machine(Model 4302, Instron, USA). All data were analyzed statistically using a one-way ANOVA and Tukey's multiple comparisons test. After the shear bond test, fracture surfaces were examined by SEM. Results: Colored zirconia showed a higher shear bonding strength than that of uncolored zirconia except for colored zirconia immersed in Zirkonzahn coloring liquid. In particular, colored zirconia immersed in Kuwotech coloring liquid showed the highest shear bond strength. After the shear bond test, mixed failure patterns were mainly observed in the failure between zirconia and veneering ceramic. Conclusion: Coloring liquid enhanced the shear bond strength zirconia and veneering ceramic than uncolored zirconia.

• 한국농공학회지
• /
• 제38권3호
• /
• pp.58-69
• /
• 1996

In recent years, the research and development about the new material proceeds rapidly and actively. In building industry, high strength concrete is of interest as a new material. Since the building structure becomes bigger, higher and more specialized, the demand of material and member with high strength expands greatly. Therefore in this experiment, cement complex with high strength was made using the condensed silica fume, a basic experiment was performed on strength property, and optimum-mixture-state was determined for manufacturing a high-strength concrete. Shear behaviour and fracture property of concrete beams with high strength were evaluated. On the whole, in spite of many researches, it is one of the difficult problems that shear fracture of concrete beams has not yet been clearly understood theoretically, and now the shear-design-standard forms in many countries are a formula based on experiment. In this study, the variable of shear behavior experiment was shear-reinforcement-ratio. By analyzing test results and comparing with computation value by ACI code, the basic data was offered on shear design of reinforced concrete beams with high strength. The effect of epoxy repair was also investigated for the beams with cracks due to flexural and shear loading.

• Structural Engineering and Mechanics
• /
• 제27권4호
• /
• pp.501-521
• /
• 2007

This study presents a model to better understand the shear behavior of reinforced concrete walls subjected to lateral load. The scope of the study is limited to squat walls with height to length ratios not exceeding two, deformed in a double-curvature shape. This study is based on limited knowledge of the shear behavior of low-rise shear walls subjected to double-curvature bending. In this study, the wall ultimate strength is defined as the smaller of flexural and shear strengths. The flexural strength is calculated using a strength-of-material analysis, and the shear strength is predicted according to the softened strut-and-tie model. The corresponding lateral deflection of the walls is estimated by superposition of its flexibility sources of bending, shear and slip. The calculated results of the proposed procedure correlate reasonably well with previously reported experimental results.