Development of shear capacity equations for RC beams strengthened with UHPFRC |
Mansour, Walid
(Department of Civil Engineering, Kafrelsheikh University)
Sakr, Mohammed (Department of Structural Engineering, Tanta University) Seleemah, Ayman (Department of Structural Engineering, Tanta University) Tayeh, Bassam A. (Department of Civil Engineering, Faculty of Engineering, Islamic University of Gaza) Khalifa, Tarek (Department of Structural Engineering, Tanta University) |
1 | Zhang, J., Dong, H., Cao, W., Yu, C. and Chi, Y. (2016). Shaking table tests of low-rise shear walls made of recycled aggregate concrete", Struct. Eng. Int., 26(1), 62-73. https://doi.org/10.2749/101686616X14480232444441. DOI |
2 | Zsutty, T. (1968), "Beam shear strength prediction by analysis of existing data", ACI J., 65, 943-951. |
3 | Zsutty, T. (1971), "Shear strength prediction for separate catagories of simple beam tests", ACI J., 68, 138-143. |
4 | JSCE (2004), Recommendations for Design and Construction of Ultra-High Strength Fiber Reinforced Concrete Structures, Japan Society of Civil Engineers, Japan. |
5 | Kodur, V., Solhmirzaei, R., Agrawal, A., Aziz, E.M. and Soroushian, P. (2018), "Analysis of flexural and shear resistance of ultra high performance fiber reinforced concrete beams without stirrups", Eng. Struct., 174, 873-884. https://doi.org/10.1016/j.engstruct.2018.08.010. DOI |
6 | Mansour, W. and Tayeh, B.A. (2020), "Shear behaviour of RC beams strengthened by various ultrahigh performance fibre-reinforced concrete systems", Adv. Civil Eng., 2020, Article ID 2139054. https://doi.org/10.1155/2020/2139054. DOI |
7 | Mohammed, A.N., Johari, M.A.M., Zeyad, A.M., Tayeh, B.A. and Yusuf, M.O. (2014), "Improving the engineering and fluid transport properties of ultra-high strength concrete utilizing ultrafine palm oil fuel ash", J. Adv. Concrete Technol., 12(4), 127-137. https://doi.org/10.3151/jact.12.127. DOI |
8 | Tayeh, B.A., Abu Bakar, B.H., Megat Johari, M.A. and Ratnam, M.M. (2014a), "Existing concrete textures: their effect on adhesion with fibre concrete overlay", Proc. Inst. Civil Eng.- Struct. Build., 167(6), 355-368. DOI |
9 | Maraq, M.A.A., Tayeh, B.A., Ziara, M.M. and Alyousef, R. (2021), "Flexural behavior of RC beams strengthened with steel wire mesh and self-compacting concrete jacketing-experimental investigation and test results", J. Mater. Res. Technol., 10, 1002-1019. https://doi.org/10.1016/j.jmrt.2020.12.069. DOI |
10 | Meraji, L., Afshin, H. and Abedi, K. (2019), "Flexural behavior of RC beams retrofitted by ultra-high performance fiber-reinforced concrete", Comput. Concrete, 24(2), 159-172. http://doi.org/10.12989/cac.2019.24.2.159. DOI |
11 | Mostosi, S., Riva, P., Maringoni, S. and Meda, A. (2011), "Shear strengthening of RC beams with high performance jacket", The fib Symposium 2011, Prague. |
12 | Noshiravani, T. and Bruhwiler, E. (2013), "Experimental investigation on reinforced ultra-high-performance fiber-reinforced concrete composite beams subjected to combined bending and shear", ACI Struct. J., 110, 251-261. |
13 | Chana, P. (1981), "Some aspects of modelling the behaviour of reinforced concrete under shear loading", Technical Report 543, Cement and Concrete Association, Wexham Springs. |
14 | Albegmprli, H.M., Cevik, A., Gulsan, M.E. and Kurtoglu, A.E. (2015), "Reliability analysis of reinforced concrete haunched beams shear capacity based on stochastic nonlinear FE analysis", Comput. Concrete, 15(2), 259-277. http://doi.org/10.12989/cac.2015.15.2.259. DOI |
15 | Amin, M., Tayeh, B.A. and Agwa, I.S. (2020), "Effect of using mineral admixtures and ceramic wastes as coarse aggregates on properties of ultrahigh-performance concrete", J. Clean. Prod., 273, 123073. https://doi.org/10.1016/j.jclepro.2020.123073. DOI |
16 | Arezoumandi, M., Smith, A., Volz, J.S. and Khayat, K.H. (2014), "An experimental study on shear strength of reinforced concrete beams with 100% recycled concrete aggregate", Constr. Build. Mater., 53, 612-620. https://doi.org/10.1016/j.conbuildmat.2013.12.019. DOI |
17 | Tayeh, B.A., Naja, M.A., Shihada, S. and Arafa, M. (2019a), "Repairing and strengthening of damaged RC columns using thin concrete jacketing", Adv. Civil Eng., 2019, Article ID 2987412. https://doi.org/10.1155/2019/2987412. DOI |
18 | Askar, L.K., Tayeh, B.A. and Abu Bakar, B.H. (2012), "Effect of different curing conditions on the mechanical properties of UHPFC", Awam International Conference on Civil Engineering (AICCE'12) and Geohazard Information Zonation (GIZ'12), 4(3). |
19 | Bazant, Z.P. and Kim, J.K. (1984), "Size effect in shear failure of longitudinally reinforced beams", ACI J., 81, 456-466. |
20 | Bhal, N.S. (1968), "uber den Einfluss der Balkenhohe auf die Schubtragfagikeit von einfeldigen Stahlbetonbalken mit und ohne Schubbewehrung: Technische Hochschule", Ph.D. Thesis, Otto-Graf-Inst.. |
21 | CSA (2004), Design of Concrete Structures, Canadian Standards Association, Mississauga. |
22 | Tayeh, B.A., Bakar, B.A. and Johari, M.M. (2013), "Characterization of the interfacial bond between old concrete substrate and ultra high performance fiber concrete repair composite", Mater. Struct., 46(5), 743-753. https://doi.org/10.1617/s11527-012-9931-1. DOI |
23 | Tayeh, B.A., Maraq, M.A.A. and Ziara, M.M. (2020), "Flexural performance of reinforced concrete beams strengthened with self-compacting concrete jacketing and steel welded wire mesh", Struct., 28, 2146-2162. https://doi.org/10.1016/j.istruc.2020.10.035. DOI |
24 | Choi, W.C. and Yun, H.D. (2017), "Shear strength of reinforced recycled aggregate concrete beams without shear reinforcements", J. Civil Eng. Manage., 23(1), 76-84. http://doi.org/10.3846/13923730.2014.976257. DOI |
25 | Baharuddin, N.K., Nazri, F.M., Bakar, B.H.A., Beddu, S. and Tayeh, B.A. (2020), "Potential use of ultra high-performance fibre-reinforced concrete as a repair material for fire-damaged concrete in terms of bond strength", Int. J. Integ. Eng., 12(9), 87-95. |
26 | Feldman, A. and Siess, C.P. (1955), "Effect of moment-shear ratio on diagonal tension cracking and strength in shear of reinforced concrete beams", Civil Engineering Studies, University of Illinois. |
27 | Tayeh, B.A., Bakar, B.A. and Johari, M.M. (2012), "Mechanical properties of old concrete-UHPFC interface", Concrete Repair, Rehabilitation and Retrofitting III: 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR-3, Cape Town, South Africa, September. |
28 | Narayanan, R. and Beeby, A. (2005), Designers' Guide to EN 1992-1-1 and EN 1992-1-2. Eurocode 2: Design of Concrete Structures: General Rules and Rules for Buildings and Structural Fire Design, Vol. 17, Thomas Telford. |
29 | Tayeh, B.A., Abu Bakar, B.H., Megat Johari, M.A. and Zeyad, A.M. (2014b), "Microstructural analysis of the adhesion mechanism between old concrete substrate and UHPFC", J. Adhes. Sci. Technol., 28(18), 1846-1864. DOI |
30 | Niwa, J., Yamada, K., Yokozawa, K. and Okamura, H. (1986), "Revaluation of the equation for shear strength of reinforced concrete beams without web reinforcement", Doboku Gakkai Ronbunshu, 9(372), 167-176. https://doi.org/10.2208/JSCEJ.1986.372_167. DOI |
31 | Deng, Q., Yi, W.J. and Tang, F.J. (2017), "Effect of coarse aggregate size on shear behavior of beams without shear reinforcement", ACI Struct. J., 114(5), 1131-1142. http://doi.org/10.14359/51689720. DOI |
32 | Elzanaty, A.H., Nilson, A.H. and Slate, F.O. (1986), "Shear capacity of reinforced concrete beams using high-strength concrete", ACI J. Proc., 83, 290-296. |
33 | Ferguson, P.M. (1956), "Some implications of recent diagonal tension tests", ACI J. Proc., 53, 157-172. |
34 | Gonzalez-Fonteboa, B. and Martinez-Abella, F. (2007), "Shear strength of recycled concrete beams", Constr. Build. Mater., 21(4), 887-893. https://doi.org/10.1016/j.conbuildmat.2005.12.018. DOI |
35 | Islam, M., Pam, H., Kwan, A. and Aayagi. (1998), "Shear capacity of high-strength concrete beams with their point of inflection within the shear span", Proc. Inst. Civil Eng.-Struct. Build., 128(1), 91-99. https://doi.org/10.1680/istbu.1998.30038. DOI |
36 | Guo, Y.H. and Wang, Z.Q. (2012), "Proposed calculation formula of shear connectors in UHPFRC-NSC composite structure", Appl. Mech. Mater., 166-169, 2851-2854. http://doi.org/10.4028/www.scientific.net/AMM.166-169.2851. DOI |
37 | Hallgren, M. (1994), "Flexural and shear capacity of reinforced high strength concrete beams without stirrups", KTH Royal Institute of Technology, TRITA-BKN, 9, 1-49. |
38 | Hussein, L., Amleh, L., Siad, H. and Lachemi, M. (2018), "Effect of very severe sulfate environment on bonded composite concrete system", Constr. Build. Mater., 191, 752-763. https://doi.org/10.1016/j.conbuildmat.2018.10.051. DOI |
39 | Jeong, C.Y., Kim, H.G., Kim, S.W., Lee, K.S. and Kim, K.H. (2016), "Size effect on shear strength of reinforced concrete beams with tension reinforcement ratio", Adv. Struct. Eng., 20(4), 582-594. https://doi.org/10.1177/1369433216658486. DOI |
40 | Haido, J.H., Tayeh, B.A., Majeed, S.S. and Karpuzcu, M. (2021), "Effect of high temperature on the mechanical properties of basalt fibre self-compacting concrete as an overlay material", Constr. Build. Mater., 268, 121725. https://doi.org/10.1016/j.conbuildmat.2020.121725. DOI |
41 | Rigi, M.J. and Narmashiri, K. (2014), "Shear strengthening of steel beams using vertical and diagonal CFRP strips", Ind. J. Fund. Appl. Life Sci., 5, 3850-3856. |
42 | ACI (2005), Building Code Requirements for Reinforced Concrete (ACI 318-05) and Commentary (ACI 318R-05), Vol. 318-05. |
43 | AFGC (2013), Betons Fibres aultras-hautes Performances. Association Francaise du Genil Civil. |
44 | Al Hallaq, A., Tayeh, B.A. and Shihada, S. (2017), "Investigation of the bond strength between existing concrete substrate and UHPC as a repair material", Int. J. Eng. Adv. Technol. (IJEAT), 6(3). |
45 | Okamura, H. and Higai, T. (1980), "Proposed design equation for shear strength of reinforced concrete beams without web reinforcement", Proc. JPN Soc. Civil Eng., 300, 131-141. https://doi.org/10.2208/jscej1969.1980.300_131. DOI |
46 | Rahal, K.N. (2006), "Shear behavior of reinforced concrete beams with variable thickness of concrete side cover", ACI Struct. J., 103(2), 171. |
47 | Sakr, M.A., Sleemah, A.A., Khalifa, T.M. and Mansour, W.N. (2019), "Shear strengthening of reinforced concrete beams using prefabricated ultra-high performance fiber reinforced concrete plates: Experimental and numerical investigation", Struct. Concrete, 20(3), 1137-1153. https://doi.org/10.1002/suco.201800137. DOI |
48 | Tayeh, B.A., Aadi, A.S., Hilal, N.N., Bakar, B.A., Al-Tayeb, M.M. and Mansour, W.N. (2019b), "Properties of ultra-high-performance fiber-reinforced concrete (UHPFRC)-a review paper", AIP Conf. Proc., 2157(1), 020040. https://doi.org/10.1063/1.5126575. DOI |
49 | Yildizel, S.A., Calis, G. and Tayeh, B.A. (2020), "Mechanical and durability properties of ground calcium carbonate-added roller-compacted concrete for pavement", J. Mater. Res. Technol., 9(6), 13341-13351. DOI |