• 한국전산구조공학회논문집
• /
• 제27권4호
• /
• pp.247-254
• /
• 2014

본 논문에서는 유공형 형상의 GFRP 판으로 전단 보강된 플랫 플레이트의 전단거동을 실험을 통해 평가하였다. GFRP 판은 개구부가 있는 판의 형태로서 콘크리트와의 일체화 거동을 위하여 콘크리트에 매립하여 시공하였다. 실험 변수로는 기둥면과 첫 번째 GFRP 판의 세로 스트립 사이의 간격, GFRP 판의 세로 스트립의 개수를 선정하였다. GFRP 판의 세로 스트립의 개수가 증가할수록 전단강도도 증가하는 결과를 보여주었다. 실험결과를 바탕으로 GFRP 판으로 보강된 플랫 플레이트의 전단강도가 ACI 318, BS 8110, EUROCODE 2, KCI에서 제시하고 있는 전단강도와 비교하여 가장 합리적인 규준을 평가하였다.

• 대한치과교정학회지
• /
• 제27권2호
• /
• pp.315-326
• /
• 1997

여러 세라믹 브라켓과 접착제에 따른 전단 결합 강도를 비교하기 위하여, 영구 소구치 48개를 대상으로 베이스의 유지 형태가 다른 3종의 세라믹 브라켓을 광중합과 화학 중합을 포함한 3종의 교정용 접착제를 사용하여 접착하고 전단 결합 강도와 파절 양상을 관찰한 결과, 화학 중합형 레진으로 접착한 경우 광중합형으로 접착한 경우보다 결합강도가 높았으며, 화학적 결합을 하는 Starfire 브라켓이, 기계적 결합을 하는 Transcend나, 복합형 결합인 Fascination 보다 전단 결합 강도가 낮았다. Trascend는 주로 법랑질과 레진(E/R)에서, Fascination은 법랑질, 레진, 브라켓 베이스에 혼합(COMB)되어 파절되며, Starfire는 레진과 브라켓 베이스(R/B)에서 파절이 나타났다.

• 대한치과보철학회지
• /
• 제40권4호
• /
• pp.365-373
• /
• 2002

The purpose of this study was to investigate the effects of desensitizer on shear bond strength of adhesive resin cements for all ceramic crown. For this study, Gluma $desensitizer^{(R)}$(Heraeus Kulzer, Germany) and MS $Coat^{(R)}$(Sun medical, Japan) were used as desensitizer, and Bistite $II^{(R)}$ resin cement(Tokuyama, Japan) and Variolink $II^{(R)}$ resin cement (Ivoclar, Liechtenstein) were used. IPS Empress ceramics were bonded to dentin surfaces after application of desensitizer and shear bond strength of specimens were measured using UTM(Zwick 1456 41. Zwick, Germany) at a crosshead speed of 1mm/min. The obtained results were as follows : 1. The shear bond strength of both resin cements were not affected by Gluma $desensitizer^{(R)}$ containing HEMA 2. The shear bond strength of Bistite $II^{(R)}$ resin cement was significantly decreased by MS $Coat^{(R)}$. 3. The failure mode in MS $Coat^{(R)}-Bistite \;II^{(R)}$ group was mainly adhesive type between dentin and resin cement. but that of Gluma $desensitizer^{(R)}$-Variolink $II^{(R)}$ group was mainly mixed type, combined adhesive failures between dentin and resin cement or porcelain and resin cement.

• 대한토목학회논문집
• /
• 제38권3호
• /
• pp.429-438
• /
• 2018

원추형콘과 T-bar 관입시험기는 점토의 비배수전단강도를 측정하기 위해 널리 사용된다. 축소모형시험의 경우 소형관입시험기가 사용되어야 하지만 경험상관계수에 대해 발표된 자료가 부족하다. 본 연구에서는 소형콘과 소형T-bar 관입시험기의 경험상관계수를 도출하기 위한 시험시스템을 구축하였고, 카올린점토에 대하여 실험을 수행하였다. 직경 350mm의 강재원형챔버를 사용하여 4개의 모형지반을 조성하였고, 각 모형지반은 다른 선행압밀응력에서 압밀하여 비배수전단강도를 조절하였다. 경계면 효과, 관입속도, 직경 및 형상의 영향을 확인하기 위하여 다른 직경을 가진 두 직경의 소형콘(10mm, 16mm)과 직경 10mm T-bar를 이용하여 시험을 수행하였다. 또한 관입시험 후의 시편을 채취하여 비압밀비배수삼축시험을 수행하여 비배수전단강도로 결정하였다. 최종적으로 비배수전단강도와 관입시 선단저항력의 상관관계를 통해 경험상관계수를 산정하였다.

• 한국지진공학회논문집
• /
• 제13권2호
• /
• pp.1-14
• /
• 2009

교각의 합리적이고 경제적인 내진설계를 위해서는 연성도에 기반한 내진설계가 필요하며 이를 위해서는 신뢰성 있는 전단평가가 필수적이다. RC 기둥의 전단거동은 휨거동과 달리 부재의 단면크기, 형상비, 축력, 연성도 등 다양한 요인에 의하여 영향을 받아 거동이 매우 복잡하다.따라서,이들 요인을 고려한 많은 설계식 및 경험식이 제안되고 있으나 부재의 초기전단강도와 연성도에 따른 전단강도 저하를 평가하는데 상당한 차이를 보이고 있다. 본 연구에서는 형상비,단면의 중공비, 복부면적, 하중패턴을 변수로 하는 실험적 연구를 수행하여 중공단면 기둥의 초기 전단강도 특성을 살펴보았다. 실험결과는 기존의 다양한 전단평가식과 비교.검토하여 특성을 분석하였으며, 역학적 특성과 실험결과에 기초하여 보다 합리적인 초기 전단평가식을 제안하고 타당성을 검토하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권3호
• /
• pp.50-61
• /
• 1995

In recent years, many ceramic researchers have discoved various methods of joining ceramic to metal. However, most of these joining methods are perfomed under vacuum and pressured circumstances. So, when we join ceramic to metal,the proceedings are very complicated and require a very high cost. The purpose of this study is to develop a new joining method of an alumina ceramic to an aluminum metal in air atmosphere. The joining condition, such as copper metallizing, nickel plating, brazing, etc. was investigated through the shear strength test of the trial joint. The results obtained from the above experimenta are summarized as follows : 1) In the case of the $Al_2O_3$/$Al_2O_3$joint, the shear strength of the joint was affected by the various foctor such as kaolin content, copper metallizing thickness, firing temperature, firing time. 2) The better shear strength of the $Al_2O_3$/Al joint was obtained when Ni plating was conducted under higher current density than existing plating condition. 3) The shear strength of the $Al_2O_3$/Al joint increases with the Ni plating thickness is confined to the range of this paper. 4) The shear strength of the thermal-shocked specimen($Al_2O_3$/Al joint) was far more deteriorated than that of the as-bonded specimen.

• 한국강구조학회 논문집
• /
• 제27권1호
• /
• pp.87-97
• /
• 2015

본 연구에서는 균열콘크리트에 매입된 선설치앵커의 정적 전단하중에 대한 콘크리트 파열파괴강도 평가 실험을 수행하였다. 이를 위해 앵커 직경 30mm, 연단거리 150mm, 매입깊이 240mm인 비균열 시험체 2개와 전단하중에 수직한 방향과 평행한 방향의 균열을 모사한 시험체 각각 3개씩에 대해 실험을 수행하였다. 실험으로부터 하중 직각방향 균열 시험체는 비균열 시험체에 비해 강도의 저하가 없었으며 하중 평행 방향 균열 시험체는 91%의 강도를 보였는데, 이는 ACI 318-11의 비균열콘크리트의 저항강도의 84%에 해당하였다. 따라서 현재 ACI 318 기준에서 균열콘크리트의 저항강도를 비균열콘크리트 강도의 71%로 고려하는 것에 비해 작은 감소율을 보였다.

• The Journal of Advanced Prosthodontics
• /
• 제9권5호
• /
• pp.350-357
• /
• 2017

PURPOSE. The object of the present study was to evaluate the shear bonding strength of composite to PEKK by applying several methods of surface treatment associated with various bonding materials. MATERIALS AND METHODS. One hundred and fifty PEKK specimens were assigned randomly to fifteen groups (n = 10) with the combination of three different surface treatments (95% sulfuric acid etching, airborne abrasion with $50{\mu}m$ alumina, and airborne abrasion with $110{\mu}m$ silica-coating alumina) and five different bonding materials (Luxatemp Glaze & Bond, Visio.link, All-Bond Universal, Single Bond Universal, and Monobond Plus with Heliobond). After surface treatment, surface roughness and contact angles were examined. Topography modifications after surface treatment were assessed with scanning electron microscopy. Resin composite was mounted on each specimen and then subjected to shear bond strength (SBS) test. SBS data were analyzed statistically using two-way ANOVA, and post-hoc Tukey's test (P<.05). RESULTS. Regardless of bonding materials, mechanical surface treatment groups yielded significantly higher shear bonding strength values than chemical surface treatment groups. Unlike other adhesives, MDP and silane containing self-etching universal adhesive (Single Bond Universal) showed an effective shear bonding strength regardless of surface treatment method. CONCLUSION. Mechanical surface treatment behaves better in terms of PEKK bonding. In addition, self-etching universal adhesive (Single Bond Universal) can be an alternative bonding material to PEKK irrespective of surface treatment method.

• 대한치과기공학회지
• /
• 제30권2호
• /
• pp.23-29
• /
• 2008

The purpose of this study is to evaluate possibility of using indirect composite resin instead of porcelain through the measurement of shear bond strength between zirconia core and indirect composite resin under treatment of $Rocatec^{TM}$ system for improving the adhesion of indirect composite resin. 20 cylindrical zirconia core specimens were divided into 2 groups, according to zirconia surface treatment and attached materials: 1) treated with sandblast and attached with indirect composite resin, 2) treated with sandblast + $Rocatec^{TM}$ system and attached with indirect composite resin. The shear bond strength of each experimental group was measured by MTS and the changes of zirconia core surface according to surface treatments were obtained by SEM observation and measurements of surface roughness. The mean shear bond strength values are $0.55\;{\pm}\;0.11MPa$(Group SC) and $1.16\;{\pm}\;0.46MPa$(Group SRC). The mean Ra values for the surface treatments were follows: $0.39\;{\pm}\;0.13$($100{\beta}_{{\mu}m}$ sandblast) and $0.50\;{\pm}\;0.03$($100{\beta}_{{\mu}m}$ sandblast + $Rocatec^{TM}$ system). In the analysis of EDS, Si element was detected in the Group SC. The shear bond strength between zirconia core and indirect composite resin was improved significantly by using $Rocatec^{TM}$ system.

• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.289-302
• /
• 1995

The purpose of this study was to estimate the shear bond strength and observe the fractured and interfacial surfaces of various dentin bonding agents used conjunction with a visible light cured composite. The senentytwo human premolars and molars extracted due to periodontal or orthodontic reasons were used and randomely divided into six groups. All the prepared dentin surfaces were treated with Superbond D-liner, Scotchbond Multi-Purpose, All-Bond 2 and Prisma Universal Bond 3 accroding to the manufacturer's instructions. Six specimens were then demineralized in 10 % HCl for 24 hours and the other six specimens were not demineralized in order to observe the interfacial surfaces with Hitachi X-450 SEM at 25Kv. Also shear bond strength were obtained using an Instron Testing Machine with a crosshead speed of 1mm/min. The following results were obtained : 1. Although shear bond strength of Superbond D-Liner(17.35 MPa) and Scotch-bond Multi-Purpose group(17.29 MPa) were higher than the All-Bond 2(12.80 MPa) and Prisma Universial Bond 3 (13.43 MPa), there were no significant statistic differences in the shear bond strength between 4 groups.(P<0.05) As a result of etching to dentin in Prism a Universial BOND 3 experimentally, the resin tag was formed, but shear bond strength was decreased. 2. The resin tag into the opened dentinal tubule was formed in Superbond D-Liner, Scotchbond Multi-Purpose, All-Bond 2(etching) and Prisma Universial Bond 3(etching), but not in the All-Bone 2 and Prism a Universial Bond 3(non-etching). 3. Strong, durable bonds between dentin and dentinal bonding agents are essential, not only resin tag into the dentinal tubules, but also hybrid layer.