• 동력기계공학회지
• /
• 제16권3호
• /
• pp.16-21
• /
• 2012

Biodiesel is technically competitive with or offers technical advantages over conventional petroleum diesel fuel. Biodiesel is an environmentally friendly alternative liquid fuel that can be used in any diesel engine without modification. In this study, to investigate the effect of fuel injection timing on the characteristics of performance with DBF in DI diesel engine. The engine was operated at five different fuel injection timings from BTDC $6^{\circ}$ to $14^{\circ}$ at $2^{\circ}$ intervals and four loads at engine speed of 1800rpm. As a result of experiments in a test engine, maximum cylinder pressure is increased with leading fuel injection timing. Specific fuel oil consumption is indicated the least value at BTDC $14^{\circ}$ of fuel injection timing.

• 해양환경안전학회지
• /
• 제28권3호
• /
• pp.451-458
• /
• 2022

In Korea, five major ports have been designated as sulfur oxide emission control areas to reduce air pollutant emissions, in accordance with Article 10 of the "Special Act on Port Air Quality" and Article 32 of the "Ship Pollution Prevention Regulations". As regulations against vessel-originated air pollutants (such as PM, CO2, NOx, and SOx) have been strengthened, the Ministry of Oceans and Fisheries(MOF) enacted rules that newly built public ships should adopt eco-friendly propulsion systems. However, particularly in diesel-electric hybrid propulsion systems,the demand for precise control schemes continues to grow as the fuel saving rate significantly varies depending on the control strategy applied. The conventional Power Take In-Power Take Off(PTI - PTO) mode control adopts a rule-based strategy, but this strategy is applied only in the low-load range and PTI mode; thus, an additional method is required to determine the optimal fuel consumption point. The proposed control method is designed to optimize fuel consumption by applying the equivalent consumption minimization strategy(ECMS) to the PTI - PTO mode by considering the characteristics of the specific fuel oil consumption(SFOC) of the engine in a diesel-electric hybrid propulsion system. To apply this method, a specific fishing vessel model operating on the Korean coast was selected to simulate the load operation environment of the ship. In this study, a 10.2% reduction was achieved in the MATLAB/SimDrive and SimElectric simulation by comparing the fuel consumption and CO2 emissions of the ship to which the conventional rule-based strategy was applied and that to which the ECMS was applied.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권4호
• /
• pp.418-424
• /
• 2015

국제해사기구 해양환경보호위원회는 2016년 1월 1일부터 배출통제지역을 통항하는 선박에 대해서 Tier III를 적용하여 질소산화물 배출 규제를 더욱 강화하기로 결정하였다. 본 논문에서는 질소산화물 배출 저감을 위한 연구의 일환으로 한국해양대학교 실습선 한바다호를 이용하여 실제 운항 중에 주기관을 단일분사와 이단지연분사의 두 가지 조건으로 운전하여 부하별 배기가스, 실린더 압력, 연료소모량 등을 계측하였다. 그 결과 두 가지 운전조건 모두 엔진의 부하가 증가할수록 질소산화물과 이산화탄소 배출량도 함께 증가하는 경향을 보였으며, 일산화탄소의 농도는 감소하였다. 또한 이단지연분사 시에는 최대폭발압력이 약 10% 이상 감소하였고, 이로 인해 배기가스 내 질소산화물의 농도는 약 25~30% 정도 감소하였다. 하지만 질소산화물 배출 저감의 긍정적인 결과에 반하여 연료소비율이 약 3~5% 정도 증가하는 상반관계가 확인되었다.

• 한국추진공학회지
• /
• 제23권4호
• /
• pp.98-103
• /
• 2019

함정 운용 장비의 건전성 예측은 유지보수의 효율성 및 긴박한 상황에서의 운용성능 유지를 위한 필수 요소이다. 최근 함정의 양적인 증가와 작전반경 확대에 따라 운용성능 유지를 위해 통합조건평가시스템(ICAS)을 도입하여 운용중이며, 관련기술 국산화를 위해 다각도로 연구가 진행되고 있다. 본 논문에서는 함정 운용 장비인 디젤발전기의 건전성 예측방법 중 데이터기반 모델 적용에 대한 결과를 제시 하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.659-673
• /
• 2021

This study aims to investigate the impact of the High Pressure Selective Catalytic Reduction system (SCR-HP) on a large marine two-stroke engine performance parameters by employing thermodynamic modelling. A coupled model of the zero-dimensional type is extended to incorporate the modelling of the SCR-HP components and the Control Bypass Valve (CBV) block. This model is employed to simulate several scenarios representing the engine operation at both healthy and degraded conditions considering the compressor fouling and the SCR reactor clogging. The derived results are analysed to quantify the impact of the SCR-HP on the investigated engine performance. The SCR system pressure drop and the cylinder bypass valve flow cause an increase of the engine Specific Fuel Oil Consumption (SFOC) in the range 0.3-2.77 g/kWh. The thermal inertia of the SCR-HP is mainly attributed to the SCR reactor, which causes a delayed turbocharger response. These effects are more pronounced at low engine loads. This study supports the better understanding of the operating characteristics of marine two-stroke diesel engines equipped with the SCR-HP and quantification of the impact of the components degradation on the engine performance.