• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.44.3-45
• /
• 2021

일반화된 excursion set 이론과 자기 유사 구형 유입(Self-similar spherical infall) 모형에 기반하여 Splashback 질량함수에 대한 해석적 단일 매개변수 모델을 착안하였다. Planck/WMAP7 관측결과를 토대로 구축된 EREBOS N-Body 시뮬레이션의 수치적 결과의 해석적 모델을 이용한 회귀분석을 통해 단일 매개변수이자 Splashback 경계의 확산적 특성을 수치화하는 확산계수(Diffusion Coefficient)의 추정치를 계산하였다. 계산된 확산계수를 적용한 해석적 모델과 수치적 결과가 5 ≤ M/(10¹²h^-1 M_⊙) < 10³의 질량범위에서 매우 근접히 일치하는 것을 보였으며 Baysian and Akaike Information Criterion 검정을 통해 0.3 ≤ z ≤ 3의 범위에서 기존의 모델들보다 본 모델이 선호 돼야함을 확인하였다. 또한 확산계수가 적색편이에 대하여 선형진화에 근접한 변화를 보임을 발견하였으며, 특정 임계 적색편이(z_c)를 기준으로 확산계수가 0에 수렴함을 발견하였다. 더 나아가 두 Planck모델과 WMAP7모델에서 도출된 확산계수는 서로 상당한 차이를 보였다. 이 결과는 암흑물질 헤일로의 splashback 질량함수가 z ≥ z_c에서 매개변수가 없는 온전한 해석적 모델로 설명되고 z_c가 독립적으로 우주의 초기조건을 독립적으로 특정지을 수 있는 가능성을 지님을 시사한다. 이 초록은 The Astrophysical Journal의 Ryu & Lee 2021, ApJ, 917, 98 (arxiv:2103.00730) 논문을 바탕으로 작성되었다.

• Journal of Broadcast Engineering
• /
• v.19 no.2
• /
• pp.268-271
• /
• 2014

Conventional forward error correction (FEC) code rate decision schemes using analytical source coding distortion model and channel-induced distortion model are usually complex, and require the typical process of model parameter training which involves potentially high computational complexity and implementation cost. To avoid the complex modeling procedure, we propose a simple but accurate joint source-channel distortion model to estimate channel loss threshold set for optimal FEC code rate decision.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.4
• /
• pp.1-12
• /
• 2003

In this study, a regime where independent treatment of SETs in transient simulations is valid has been identified quantitatively. It is found that as in the steady-state case, each SET can be treated independently even in the transient case when the interconnection capacitance is large enough. However, the value of the load capacitance $C_{L}$of the interconnections for the independent treatment of SETs is approximately 10 times larger than that of the steady state case. A compact SET transient model is developed for transient circuit simulation by SPICE. The developed model is based on a linearized equivalent circuit and the solution of master equation is done by the programming capabilities of the SmartSpice. Exact delineation of several simulation time scales and the physics-based compact model make it possible to accurately simulate hybrid circuits in the time scales down to several tens of pico seconds. The simulation time is also shown to depend on the complexity level of the transient model.l.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.6
• /
• pp.842-848
• /
• 2008

This paper deal with uncertainty problem by using Type-2 fuzzy logic set for nonlinear system modeling. We design Type-2 fuzzy logic system in which the antecedent and the consequent part of rules are given as Type-2 fuzzy set and also analyze the performance of the ensuing nonlinear model with uncertainty. Here, the apexes of the antecedent membership functions of rules are decided by C-means clustering algorithm and the apexes of the consequent membership functions of rules are learned by using back-propagation based on gradient decent method. Also, the parameters related to the fuzzy model are optimized by means of particle swarm optimization. The proposed model is demonstrated with the aid of two representative numerical examples, such as mathematical synthetic data set and Mackey-Glass time series data set and also we discuss the approximation as well as generalization abilities for the model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2335-2340
• /
• 2009

This paper presents how to implement Markerless Augmented Reality and how to create and apply reference data sets. There are three parts related with implementation: setting camera, creation of reference data set, and tracking. To create effective reference data sets, we need a 3D model such as CAD model. It is also required to create reference data sets from various viewpoints. We extract the feature points from the mode1 image and then extract 3D positions corresponding to the feature points using ray tracking. These 2D/3D correspondence point sets constitute a reference data set of the model. Reference data sets are constructed for various viewpoints of the model. Fast tracking can be done using a reference data set the most frequently matched with feature points of the present frame and model data near the reference data set.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.204-207
• /
• 2009

This paper presents how to implement Markerless Augmented Reality and how to create and apply reference data sets. There are three parts related with implementation: setting camera, creation of reference data set, and tracking. To create effective reference data sets, we need a 3D model such as CAD model. It is also required to create reference data sets from various viewpoints. We extract the feature points from the model image and then extract 3D positions corresponding to the feature points using ray tracking. These 2D/3D correspondence point sets constitute a reference data set of the model. Reference data sets are constructed for various viewpoints of the model. Fast tracking can be done using a reference data set the most frequently matched with feature points of the present frame and model data near the reference data set.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.9
• /
• pp.375-384
• /
• 2021

Deep learning techniques have been proven to have high performance in image processing and are applied in various fields. The most widely used methods for validating a deep learning model include a holdout verification method, a k-fold cross verification method, and a bootstrap method. These legacy methods consider the balance of the ratio between classes in the process of dividing the data set, but do not consider the ratio of various features that exist within the same class. If these features are not considered, verification results may be biased toward some features. Therefore, we propose a deep learning model validation method based on data feature coverage for image classification by improving the legacy methods. The proposed technique proposes a data feature coverage that can be measured numerically how much the training data set for training and validation of the deep learning model and the evaluation data set reflects the features of the entire data set. In this method, the data set can be divided by ensuring coverage to include all features of the entire data set, and the evaluation result of the model can be analyzed in units of feature clusters. As a result, by providing feature cluster information for the evaluation result of the trained model, feature information of data that affects the trained model can be provided.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.1
• /
• pp.117-126
• /
• 2022

Currently, the number of bridge structures in Korea is continuously increasing and enlarged, and the number of old bridges that have been in service for more than 30 years is also steadily increasing. Bridge aging is being treated as a serious social problem not only in Korea but also around the world, and the existing manpower-centered inspection method is revealing its limitations. Recently, various bridge damage detection studies using deep learning-based image processing algorithms have been conducted, but due to the limitations of the bridge damage data set, most of the bridge damage detection studies are mainly limited to one type of crack, which is also based on a close set classification model. As a detection method, when applied to an actual bridge image, a serious misrecognition problem may occur due to input images of an unknown class such as a background or other objects. In this study, five types of bridge damage including crack were defined and a data set was built, trained as a deep learning model, and an open set recognition-based bridge multiple damage recognition model applied with OpenMax algorithm was constructed. And after performing classification and recognition performance evaluation on the open set including untrained images, the results were analyzed.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.6
• /
• pp.434-442
• /
• 2003

Software internationalization, the process of making software easier to localize for specific languages, has deep implications when applied to speech technology, where the goal of the task lies in the very essence of the particular language. A greatdeal of work and fine-tuning has gone into language processing software based on ASCII or a single language, say English, thus making a port to different languages difficult. The inherent identity of a language manifests itself in its lexicon, where its character set, phoneme set, pronunciation rules are revealed. We propose a decomposition of the lexicon building process, into four discrete and sequential steps. For preprocessing to build a lexical model, we translate from specific language code to unicode. (step 1) Transliterating code points from Unicode. (step 2) Phonetically standardizing rules. (step 3) Implementing grapheme to phoneme rules. (step 4) Implementing phonological processes.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.2
• /
• pp.57-64
• /
• 2014

Most previous studies of software fault prediction model which determines the fault-proneness of input modules have focused on supervised learning model using training data set. However, Unsupervised learning model is needed in case supervised learning model cannot be applied: either past training data set is not present or even though there exists data set, current project type is changed. Building an unsupervised learning model is extremely difficult that is why only a few studies exist. In this paper, we build unsupervised models using representative clustering algorithms, EM and DBSCAN, that have not been used in prior studies and compare these models with the previous model using K-means algorithm. The results of our study show that the EM model performs slightly better than the K-means model in terms of error rate and these two models significantly outperform the DBSCAN model.