• 한국산업보건학회지
• /
• 제22권2호
• /
• pp.119-127
• /
• 2012

Objectives: The aim of this study is to identify concentration characteristics of indoor and outdoor airborne total fiber particles and asbestos in Gyeongnam Provinces. Methods: This study investigated concentration characteristics of indoor fiber particles from 748 schools and 38 public facilities as well as outdoor particles from 11 sites through PCM (phase contrast microscope). SEM/EDX (scanning electron microscope/energy dispersive using X-ray analysis) was used to obtain physicochemical information of asbestos fiber particles. The study identified asbestos rate in the 15 samples from indoor and outdoor airborne total fiber particles. Results: 1. The average indoor airborne concentrations of total fiber particles were $0.0011{\pm}0007$ f/cc in schools and $0.0015{\pm}0007$ f/cc in public facilities by PCM. Over 90% of the fiber particles were identified as single fibers. 2. The average outdoor airborne concentrations of total fiber particles were $0.0007{\pm}0002$ f/cc, and they were lower than those of indoor airborne concentrations. 3. The results showed that the form of asbestiform was diverse as skein of thread like form and long needle, which was relatively narrower than that of glass fiber and rock wool. 4. The results of SEM/EDX analysis of 15 areas where total fiber particle was relatively high showed that the form was rather similar to that of asbestos, but chemical composition was proven to be non-asbestos. Conclusions: The concentration of indoor and outdoor airborne total fiber particles of Gyeongnam Provinces satisfied the IAQ (Indoor air quality) level of 0.01 f/cc and asbestos was not found in most of the samples by SEM/EDX.

• 한국대기환경학회지
• /
• 제13권5호
• /
• pp.345-353
• /
• 1997

The purpose of the study was to stastically classify individual PM-10 measured by SEM/EDX (scanning electron microscopy/energy dispersive x-ray analyzer). The SEM/EDX provided various physical parameters like optical diameter, as well as major 18 chemical information (Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, Pb) for a particle-by-particle basis. The total of 1,419 particles were analyzed for the study. Thus density and mass of each particle can be estimated based on its chemical composition. Further the study developed 4 semisource profiles including highway, oil boiler, incinerator, and soil emissions, where each sample was collected near the source in the ambient air The profiles developed were consisted of mass fractions and their uncertainties based on a particle class concept. To obtain mass fraction of each particle class, an agglomerative hierarchical cluster analysis was initially applied to create particle classes for each sample. Then uncertainties were calculated for each class based on the jacknife method. The 1,258 particles out of 1,419 (88.7%) were assorted in newly generated particle classes. The study provides opportunities to identify particle's source quantitatively and to develope various receptor models.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.567-574
• /
• 2000

The purpose of this study is to examine mineralogical properties of the soft clay that is distributed widely in Samsan area, Ulsan. XRD analysis were examined to find the quantities of the clay minerals. And XRF, SEM and EDX analysis were also examined to investigate the chemical compositions and the structures of the clay. The properties of the samples from 2 sites in Samsan area were that the minerals of the clay were illite, kaolinite, chlorite, smectite and etc.. The plenty of illite has 38 to 53% of content in whole study area. And kaolinite had 18 to 30%, chlorite had 15 to 25%, and smectite had 4 to 12% of content, respectively. The results of SEM observation showed that appearances of Ulsan clay were sheet, plannar or needle form. Ulsan clay included the salt crystal of cubic and the foraminifera, which were related with the content of organ.

• 한국산학기술학회논문지
• /
• 제11권5호
• /
• pp.1760-1767
• /
• 2010

FAT복합체는 TOS ($TiOSO_4{\cdot}xH_2O$)를 사용하여 솔-겔 방법으로 제조한다. 시료들은 SEM, 비표면적, XRD 및 EDX를 사용하여 분석하였다. SEM결과로서 Fe 와 $TiO_2$ 입자가 AC 표면에 분포하고 있다. XRD 결과에서 Fe-AC/$TiO_2$ 복합체는 다 anatase결정상을 하고 있다. 그리고 EDX 결과에서 C, O, Ti 및 Fe 원소가 Fe-AC/$TiO_2$ 복합체에 다 존재하고 있다. 복합체의 광촉매 활성은 가시광선과 UV광선을 사용하고 메틸렌불루(MB)의 분해 효과에 의해 측정한다. Fe-AC/$TiO_2$ 복합체는 강한 가시광선 조사에서 우수한 광촉매 효과가 나타난다. AC/$TiO_2$ 복합체에 있는 소량 존재하는 Fe 원소가 그들의 광촉매 활성을 강화할 수 있다.

• 한국전자현미경학회:학술대회논문집
• /
• 한국현미경학회 2007년도 제38차 춘계학술대회 초록집
• /
• pp.24-25
• /
• 2007

• 전기학회논문지P
• /
• 제57권3호
• /
• pp.332-337
• /
• 2008

We analyzed carbonization pattern and crystal structure of polyvinyl chloride wire by thermal stress. Copper that is oxidized at normal temperature is a reddish brown. If under the thermal stress range of 500 to 700 [$^{\circ}C$], carbonization and exfoliation occurrence. Section structure of electric wire is same as arrangement of particle in metallograph analysis. But, as thermal stress increases, size of particle is enlarged. Electric wire displays elongation structure in SEM image analysis and elongation structure collapses when receive thermal stress at 300 [$^{\circ}C$]. In EDX analysis, we get the spectra of CuL, CuK, OK, and ClK. FT-IR analysis was shown new spectra with in range of $1,440{\sim}1,430\;[cm^{-1}]$, 1,340 [$cm^{-1}$], 1,240 [$cm^{-1}$].

• 한국대기환경학회지
• /
• 제16권6호
• /
• pp.565-572
• /
• 2000

To quantitatively estimate mass contribution of long-range transported yellow sand, their sources should be separated independently from various local soil sources having similar elemental compositions. While it is difficult to estimate total mass loadings of pure yellow sand by traditional bulk analysis, it can be clearly solved by an particle-by-particle analysis. To perform this study, two yellow sand samples and three local soil samples were collected by a mini-volume sampler. These samples were three analyzed using a scanning electron microscope(SEM) equipped with an energy dispersive x-ray analyser (EDX) was used to obtain basic chemical information of individual yellow san particles. A total of 19 elements in a single particle were measured to develop a source profile with newly created homogeneous particle classes (HPCs) as chemical variables. The present study showed that the yellow sand samples as well as three local soil samples were characterized with reasonably well created HPCs. Finally the mass fraction of each HPC in each sample was calculated and then compared each other.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1998년도 추계 학술논문발표회 논문집
• /
• pp.173-177
• /
• 1998

In this paper, we reported an outbreak of fire hazard of ballast for fluorescent lamp. The surface structure and composition of ballast coil analyzed by using metallurgical microscope, scanning electron microscope(SEM) and energy dispersive x-ray spectroscopy(EDX). The surface of molten mark appeared columnar structure and void. EDX analysis indicated that the molten mark spectra were composed not only of the corresponding original spectra but also of several new lines.

• 한국환경과학회지
• /
• 제19권4호
• /
• pp.509-516
• /
• 2010

This study was investigated the characteristics of indoor air concentration of fiber particles in 30 public facilities and 245 schools by PCM (phase contrast microscopy). Also SEM/EDX (scanning electron microscope / energy dispersive using X-ray analysis) was used to obtain physicochemical information of asbestos fiber and to classify asbestos and non-asbestos of fiber particles. The airborne concentrations of fiber particles were $0.0009\pm0.0009$ counts/mL in public facilities and $0.0012\pm0.0006$ counts/mL in schools by PCM. All the samples were satisfied with the IAQ (indoor air quality) level of 0.01 counts/mL. In classification of 4 type shapes, over 80% of the fiber particles were identified as single fiber type. And this study analysed airborne fiber particles in 4 sites for identifying asbestos of by SEM/EDX. The asbestos fibers in most samples could not be found.

• 분석과학
• /
• 제18권4호
• /
• pp.355-361
• /
• 2005

본 연구는 인산의 전처리에 의한 두 종류의 활성탄소섬유의 특성 변화와 여기에 칼륨을 처리하여 표면 특성을 비교하고자 하였다. X-선 회절 패턴은 인산을 전처리함에 따라 칼륨종을 포함하는 활성탄소섬유에 대한 금속과 금속염의 존재에 대한 좋은 결과를 나타내었다. 인산을 처리한 후에 표면특성과 비표면적 변화에 차이의 원인을 나타내기 위하여, 동공구조와 표면 모폴로지를 흡착분석과 SEM에 의하여 연구하였다. 인산을 가지고 전처리한 활성탄소섬유의 칼륨 처리효과에 대한 화학적 구성에 대한 원소분석을 위하여 EDX를 사용하였다. 최종적으로, 산소를 포함하는 기능기의 형태와 정성분석은 Boehm에 의하여 제안된 방법으로 부터 결정하였다.