• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1229-1235
• /
• 2015

Scaffold fabrication technology using a 3D printer was developed for damaged bone tissue regeneration. A scaffold for bone tissue regeneration application should be biocompatible, biodegradable, and have an adequate mechanical strength. Moreover, the scaffold should have pores of satisfactory quantity and interconnection. In this study, we used the polymer deposition system (PDS) based on fused deposition modeling (FDM) to fabricate a 3D scaffold. The materials used were polycaprolactone (PCL) and alginic acid sodium salt (sodium alginate, SA). The salt-leaching method was used to fabricate dual pores on the 3D scaffold. The 3D scaffold with dual pores was observed using SEM-EDS (scanning electron microscope-energy dispersive spectroscopy) and evaluated through in-vitro tests using MG63 cells.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.5
• /
• pp.206-210
• /
• 2018

Two kinds of bioactive glass were coated on the Ti6Al4V alloy by the enameling technique. In order to reduce the thermal stress due to the difference in expansion coefficient with the alloy with the secondary coating forming hydroxyapatite, the difference in expansion coefficient between the alloy and the two glasses was adjusted at $2{\times}10^{-6}/^{\circ}C$ intervals. FE-SEM and EDS analysis showed that good adhesion was formed between the Ti6Al4V alloy and the primary coating by diffusion bonding. After immersion in SBF solution, it was confirmed from FT-IR that hydroxycarbonate apatite formed in the secondary coating was not different from bulk bioactive glass.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.2
• /
• pp.95-101
• /
• 2009

The surface characteristics of Zachery-treated turquoise stones have been studied in detail with a comparison of natural and plastic-impregnated turquoise. The SEM-EDS analysis exhibited that Zachery-treated turquoise was characterized by the uniform distribution of potassium element through the specimen and did not show the sharp crystalline $SiO_2$ facet and boundary phase which are common in natural ore. The potassium element shown in the Zachery-treated turquoise seemed to be occurred during the treatment process for the improvement of durability. The bar-shaped crystals observed in the pore was found to be a feature of Zachery treated turquoise and are expected to influence on their stability and durability, while the pore sizes in turquoise stones depends on the parameter of the treatment procedure.

• The Journal of the Korean dental association
• /
• v.55 no.2
• /
• pp.128-138
• /
• 2017

Objective: The aim is to evaluate the potential of the mesiodens through the comparative inorganic analysis of 3rd molar teeth prior to clinical study. Material and methods: The extracted mesiodens and the 3rd molar teeth were prepared. The teeth are prepared as in the process of the autogenous tooth bone graft. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) analysis was performed for inorganic analysis. Results: Rough and porous surfaces were observed in all materials in SEM analysis. Ca/P ratio of mesiodens was 1.55 and the 3rd molar was 1.22 in EDS analysis. XRD analysis shows that the 3 main peaks position were similar. This means that the graft materials are very similar to that of the crystallinity. Conclusions: The mesiodens and the 3rd molar teeth are very similar to the inorganic component. These results provide the reasonable rationale that mesiodens can be used as autogenous tooth bone graft in a clinic.

• The korean journal of orthodontics
• /
• v.47 no.1
• /
• pp.3-10
• /
• 2017

Objective: Microbial aggregation around dental implants can lead to loss/loosening of the implants. This study was aimed at surface treating titanium microimplants with silver nanoparticles (AgNPs) to achieve antibacterial properties. Methods: AgNP-modified titanium microimplants (Ti-nAg) were prepared using two methods. The first method involved coating the microimplants with regular AgNPs (Ti-AgNP) and the second involved coating them with a AgNP-coated biopolymer (Ti-BP-AgNP). The topologies, microstructures, and chemical compositions of the surfaces of the Ti-nAg were characterized by scanning electron microscopy (SEM) equipped with energy-dispersive spectrometer (EDS) and X-ray photoelectron spectroscopy (XPS). Disk diffusion tests using Streptococcus mutans, Streptococcus sanguinis, and Aggregatibacter actinomycetemcomitans were performed to test the antibacterial activity of the Ti-nAg microimplants. Results: SEM revealed that only a meager amount of AgNPs was sparsely deposited on the Ti-AgNP surface with the first method, while a layer of AgNP-coated biopolymer extended along the Ti-BP-AgNP surface in the second method. The diameters of the coated nanoparticles were in the range of 10 to 30 nm. EDS revealed 1.05 atomic % of Ag on the surface of the Ti-AgNP and an astounding 21.2 atomic % on the surface of the Ti-BP-AgNP. XPS confirmed the metallic state of silver on the Ti-BP-AgNP surface. After 24 hours of incubation, clear zones of inhibition were seen around the Ti-BP-AgNP microimplants in all three test bacterial culture plates, whereas no antibacterial effect was observed with the Ti-AgNP microimplants. Conclusions: Titanium microimplants modified with Ti-BP-AgNP exhibit excellent antibacterial properties, making them a promising implantable biomaterial.

• Journal of Energy Engineering
• /
• v.15 no.3 s.47
• /
• pp.146-153
• /
• 2006

A performance test of the stainless steel based sintered metal filter was conducted on the low and intermediate level radioactive waste (LILW) vitrification process. The applicability of the metal filter was based on the test results as well. The baseline pressure drop of the metal filter was evaluated similar to the ceramic filter. During the test, when the flow rate of off-gas was $110Nm^{3}/h$, the total baseline pressure drop was shown as $92mmH_{2}O$. The total pressure drop was attributed to the filter media and the residual dust layer and the value of each was $25mmH_{2}O\;and\;67mmH_{2}O$ respectively. The SEM-EDS spectrum and micrograph of the metal filter specimen showed, no corrosion and no physical damage both at the skin membrane and at the support layer. And most of the baseline pressure drop was caused by the deposition of dust on the surface of the membrane. In conclusion, even though the filter exposure time was short at the test, the performance of the stainless steel based metal filter was acceptable for the treatment of LILW vitrification process.

• Korean Journal of Materials Research
• /
• v.3 no.4
• /
• pp.410-421
• /
• 1993

Phase equilibria and reaction paths of the superconducting phases and other compatible phases at $850^{\circ}C$ in the Bi-Sr-Ca-Cu-O system were studied. $Bi_2O_3$ was added to $Sr_2CaCu_2O_x$ by 5% up to 40 mole% Bi in the pseudo-binary $Bi_2O_3-(Sr_2CaCu_2O_x)$ system and the heat treated samples were analysed using XRD. SEM, EDS. and DT A. When Bi contents were greater than 35 mole% Bi, liquid phase was formed which was compatible with $Bi_2Sr_2CaCu_2O_8$ phase. The m.p. of $Bi_2Sr_2CaCu_2O_8$ phase decreased as the content of (Sr+Ca)decreased. $Bi_{2+x}Sr_2CaCu_2O_8$ phase first segregated out of liquid phase around $Bi_2Sr_2CaCu_2O_8$ phase during cooling of liquid phase.

• Conservation Science in Museum
• /
• v.9
• /
• pp.1-15
• /
• 2008

We observed the section and microstructure by Scanning Electron Mirrorscope (SEM) for 4 'Bowls, white porcelain with impressed floral design and sliver bound rim' and 1 'Dish, white porcelain with sliver bound rim', which was manufactured by reverse firing and metal bound rim was wrapped to the part of not being spread glaze at inlet, in Jingdezhen white porcelains, the relics dug from the seabed of Shinan conserved in National Museum of Korea, and found that the ingredient of metal rim was not silver but tin as a result of measuring by BEI of Energy Dispersive Spectroscopy (EDS). And as a result of survey with Fourier transform infrared spectroscopy(FT-IR) for checking the method of joining metal rim of mouth part, it was found that joining was made with materials made of lacquer.

• Journal of Conservation Science
• /
• v.22
• /
• pp.109-120
• /
• 2008

Understanding the whole knowledge of ceramics is essential for a person in charge of conservation of ceramics since their methods of manufacturing or materialistic features have very close relationship with their damaging process. Also, various executions of repair and restoration dealing with any damage in use have to be looked into. The information attained through those studies finds damaging causes of ceramics, which becomes a critical element when choosing a proper conservation treatment method and utilizes as indispensable data for permanent preservation. As part of scrutinizing materials of repair and restoration, this study examines the purpose, date, and the constituents of the materials used in metal bound rims adhered to the brim of ceramics. Among the subjected ceramics, the metal bound rims possible to scientific analysis were gone through element analyses with Portable ${\bullet}\"{I}$-XRF Spectrometer and SEM-EDS while the ingredients of the ceramics difficult to analyze were inferred by eye inspection of exhibition catalogues. The results of this study confirm that metal bound rims consisted of diverse materials were adhered to the brim of ceramics.

• Journal of the Korean Institute of Gas
• /
• v.24 no.5
• /
• pp.39-46
• /
• 2020

This paper is considered about centerline segregation of API 5L steel used in pipeline. Mn/S, Nb and C were known as segregated elements in the centerline of pipe thickness. The Mn usually was accompanied by S consisting of long viscous shape. Microstructure of the centerline was composed of MnS and Nb/Ti indusions including oxide. The segregation effect in centerline region was analyzed by OM, SEM/EDS and micro Vickers hardness. The Mn, Nb and C are retarded elements in transformation from austenite to ferrite or martensite. These elements could derive a bainitic microstructure as a kind of martensite, which is different from difference and element segregation between in matrix and centerline derived from steel melting and heat treatment.