• Journal of the Korean institute of surface engineering
• /
• v.36 no.2
• /
• pp.206-213
• /
• 2003

Effects of plasma nitriding on the surface characteristics of tool steels have been investigated using wear tester, micro-hardness tester and scanning electron microscope (SEM) Commercial SKD 11 and SM45 alloy were used as specimens and were plasma nitrided using a plasma nitriding equipment for 5 hr and 10hr at $500^{\circ}C$. Microstructure and phase analysis were performed using SEM and XRD. It was found that plasma nitriding for lour at $500^{\circ}C$, compared with plasma nitriding for 10hr at $500^{\circ}C$, had a thick nitrided layer and produced a layer with good wear resistance and hardness as nitriding time increased. SKD11 alloy showed that wear resistance and hardness decreased, whereas surface roughness increased, compared with SM45 alloy.

• Carbon letters
• /
• v.11 no.2
• /
• pp.102-106
• /
• 2010

In this work, the effect of aminized multi-walled carbon nanotubes (NH-MWNTs) on the mechanical interfacial properties of epoxy nanocomposites was investigated by means of fracture toughness, critical stress intensity factor ($K_{IC}$), and impact strength testing, and their morphology was examined by scanning electron microscope (SEM). It was found that the incorporation of amine groups onto MWNTs was confirmed by the FT-IR and Raman spectra. The mechanical interfacial properties of the epoxy nanocomposites were remarkably improved with increasing the NH-MWNT content. It was probably attributed to the strong physical interaction between amine groups of NH-MWNTs and epoxide groups of epoxy resins. The SEM micrographs showed that NH-MWNTs were uniformly embed and bonded with epoxy resins, resulted in the prevention of the deformation and crack propagation in the NH-MWNTs/epoxy nanocomposites.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.139-139
• /
• 2010

Rhenium-Iridium(Re-Ir) thin films were deposited onto the tungsten carbide(WC) molding core by sputtering system. The Re-Ir thin films on tungsten carbide molding core were analyzed by scanning electron microscope(SEM) and surface roughness. The Re-Ir coating technique has been intensive efforts in the field of coating process because the coating technique and process have been their feature, like hardness, high elasticity, adrasion resistance and mechanical stability and also have been applied widely the industrial and biomedical areas. In this report, tungsten carbide(WC) molding core was manufactures using high performance precision machining and the efforts of Re-Ir coating on the surface roughness.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.12
• /
• pp.2055-2060
• /
• 2003

Striation is a typical pattern observed on the fatigue fracture surface and the spacing is known to correspond to a macroscopic fatigue crack growth rate, and many models for the predict in the formation of such striation have been proposed. However, these theories and methods can't be applied under random loading spectrum. In this study, the fatigue tests were carried out on aluminum alloy under random loading spectrum. The fatigue fracture surfaces were observed in the scanning electron microscope (SEM) and great quantities of SEM micrographs were synthesized and saved in computer system. The space and morphology of several large-scale striations, which are expected to from at the relatively greater load range in loading block, were observed. The crack length for each loading blocks was decided in consideration of regularity and repetition of those striations. It is shown that the applicability of fractographic methods on the fatigue fracture surface under random loading spectrum.

• Structural Engineering and Mechanics
• /
• v.31 no.1
• /
• pp.1-10
• /
• 2009

An experimental investigation was conducted to evaluate the performance of mortars with and without Metakaolin (MK) exposed to elevated temperatures $200^{\circ}C$, $400^{\circ}C$, $600^{\circ}C$ and $800^{\circ}C$ for two hours. The binder to sand ratio was kept constant (1:5.23). The ordinary Portland cement (OPC) was replaced with MK at 0%, 5%, 10% 20% and 30%. All mixtures were designed to have a flow of $94{\pm}5%$. The compressive strength of mortars before and after exposure to elevated temperature was determined. The formation of various decomposition phases were identified using X-ray diffractometry (XRD) and differential thermal analysis (DTA). The microstructure of the mortars was examined using scanning electron microscope (SEM). Test results indicated that MK improves the compressive strength before and after exposure to elevated temperature and that the 20% cement replacement of MK is the optimum percentage.

• Carbon letters
• /
• v.13 no.4
• /
• pp.226-229
• /
• 2012

Polyacetylene (PA) films with vertically aligned fibril morphology were synthesized in homeotropic nematic liquid crystal (N-LC) solvent by using a magnetic field of 5 Tesla as an external perturbation. Scanning electron microscope (SEM) photographs indicated that the lengths of fibrils from the substrate were $5-35{\mu}m$, depending on polymerization time. Carbonization was carried out using iodine-doped PA film and a morphology-retaining carbonization method. From the SEM results, we confirmed that the vertical morphology of the PA remains unchanged even after carbonization at $800^{\circ}C$. The weight loss of the films due to carbonization at $800^{\circ}C$ is about 20% of the weight of the film before iodine doping. It is expected that vertically aligned carbon might be a precursor for preparing vertical graphite materials, which materials could be useful for electrochemical energy storage and cell electrodes.

• Journal of Environmental Science International
• /
• v.7 no.5
• /
• pp.693-696
• /
• 1998

We tried to develope a desulfurization sorbent using eggshell for recycling, practicability, and economic development. The calcination character of the eggshell was examined by thermal gravimetric analysis and qualitative-quantitative character by X-ray diffractometer(XRD) and scanning electron microscope(SEM). The calcination was occurred easily in the case of eggshell and its form was changed from calcite($CaCO_3$) to lime(CaO). The grain and pore sizes of the calcined sample after base-treatment were larger and more crystallic. The adsorption ability of the eggshell was two- to six-times in the calcination temperature more than in the grain size. Therefore, the eggshell was thought to be usable as the desulfurization sorbent.

• Journal of Acupuncture Research
• /
• v.19 no.2
• /
• pp.105-113
• /
• 2002

Objective : The purpose of this study is to investigate the protective effect of DADS on the noise induced hearing loss Methods : Twenty healthy guinea pigs (DADS pretreated group and control) were exposed to 100dB a collected environmental noise for 9 hours. An auditory evoked brainstem response (ABR) threshold was measured before and after a noise exposure. For morphological study, cochlea was studied by scanning electron microscope (SEM). Results : The DADS pretreated group showed statistically significant less changes in ABR threshold and SEM findings compared the control group. Conclusion : From these results suggest that the DADS from garlic may have a protective effect in noise induced hearing loss.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1452-1454
• /
• 2002

Large turbine generator(rated 22kV) has failed in the stator winding area during normal operation. The capacitance and tan${\delta}$ were measured by Schering bridge in the zone 1, 2 and zone 3-6 stator windings. The capacitance and tan${\delta}$ in the zone 1, 2 of stator winding were higher than those of zone 3-6 in the stator winding. Experiments on microstructure property were conducted in the zone 1, 2 and zone 3-6 insulations, which were drawn out from stator windings of the large turbine generator. Microstructure analysis was characterized using scanning electron microscope(SEM). SEM results indicated that several isolated delaminations occurred at the interface of mica/epoxy insulations. Both thermal and mechanical aging cause the delamination.

• Preventive Nutrition and Food Science
• /
• v.6 no.2
• /
• pp.112-116
• /
• 2001

Oxidized potato starch/polyethylene (PE) cast films were prepared with different percentages of linear low density PE (LLDPE), oxidized potato starch and prooxidant. For the determination of biodegradability of the films, lignocellulose-degrading Streptomyces viridosporus T7A (ATCC 39115) was used. Films were chemically disinfected and incubated with S. viridosporus by shaking at 100 rpm at 37$^{\circ}C$ for eight weeks. Hydroxyl indices of the films by Fourier-Transform Infrared Spectroscopy, mechanical Properties of the films by Instron and film morphology by scanning electron microscope (SEM) were measured. The hydroxyl index of the film containing the oxidized potato starch incubated with S. viridosporus T7A was higher than that of the corresponding control. All the films containing 5% and 10% oxidized starch showed a decrease of tensile strength on the films after incubation when the corresponding uninoculated film was compared. In the oxidized starch/PE film incubated with S. viridosporus T7A, partial destruction of starch and PE was examined by SEM.