• Journal of Environmental Science International
• /
• v.23 no.6
• /
• pp.1075-1083
• /
• 2014

The objective of this study was to evaluate the effect of cutting types on microclimate and growth characteristics of afforested tree in Quercus acutissima stand after different types of cutting. The difference in temperature reaching $5.2^{\circ}C$ was shown in between clear cutting and selective cutting treatments. On July and August days with temperatures more than $35^{\circ}C$ often appeared in clear cutting stand. The values of VPD in July and August were higher than those in other months. Maximum VPD of 3.99 kPa was shown in clear cutting stand on May 23 as a prolonged rainless days appeared. However, VPD in selective cutting stand always stayed under 3.0 kPa throughout growing season. A higher intensity was shown in clear cutting and strip clear cutting stands, reaching to more than $1,600{\mu}mol\;m^{-2}s^{-1}$ at midday on early August, while that in selective cutting stand stayed about 1,500. In relative growth rate selective cutting stand showed a significantly higher relative growth rate in plant height than those in other cutting stands (p<0.05). The number of leaf in current-year branches significantly increased in selective cutting stand, whereas no increase was shown in clear cutting and strip clear cutting stands (p<0.05). In addition, relative elongation rate of current year branch also showed higher values in selective cutting stand compared with that in strip clear cutting stand (p<0.05). However, leaf mass per unit area (LMA) was higher in order of strip clear cutting, clear cutting, and selective cutting stands. From these results it is concluded that environmental conditions in clear cutting and strip clear cutting stands during growing season are more stressful to afforested tree species, resulting in lower relative growth in plant height, elongation of current-year branches, and leaf number per branch compared with those in selective cutting stand. Consequently, more data must be accumulated in the field to find out best cutting type in plantation considering the adaptational characteristic of each tree species varies with species and life span of tree is long.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.478-487
• /
• 1996

A " plucking rolls device" was developed in this study to improve the quality of harvested tea leaves. In this report, the outline of the system and the results of performance experiments in our laboratory are discussed. Tow kinds of performance experiments were carried out. The first experiment checked harvesting accuracy by using a plucking unit that was developed for harvesting machine installation. The second experiment was a harvesting experiment which utilized a fron bar in order to prevent cutting of the tea buds which had been a problem in precious experiments . As a results of the first experiments , it was confirmed that selective harvesting obtained high quality tea leaves. but a cutting problem that, when the harvesting seed was faster than the working speed, which was non-selective harvesting , was also seen. In the second experiment, the cutting rate decreased to a maximum of 50% level, when tea buds most bent ahead by the front bar. The effect was seen that cutt ng problem was alleviated from this.

• Journal of Korean Society of Forest Science
• /
• v.94 no.1 s.158
• /
• pp.6-10
• /
• 2005

This study was conducted to understand the dynamics of naturally regenerated seedlings and saplings in 28years after selective cutting at natural Korean pine-broadleaved forests in Mt. Changbai. The number of naturally regenerated tree species was 16 species in 28 years after selective cutting. The appearance rate of naturally regenerated tree species was 56 percentage and the early-successional tree species of Acer ukurunduense, Acer mono, Acer pseudosieboldianum, Prunus padus var. pubescens, and Maackia amurensis were found in the first 10 years after selective cutting. The seedlings and saplings of shade-tolerant tree species of Pinus koraiensis, Acer mandshuricum, Ulmus laciniata were appeared and the appearance rate was higher than 75% after 15 years while it showed little changes from 19 years after selective cutting. The distribution density of seedlings and saplings of regenerated tree species in selective cutting area was 5,500~6,100 trees per hectare in the first 10 years, and it increased gradually along with the restoration of disturbed area and it could reach 7,500 trees per hectare after 15 years.

• Korean Journal of Environment and Ecology
• /
• v.12 no.3
• /
• pp.279-289
• /
• 1998

To monitor vegetation structure of evergreen broad-leaved forest, twenty plots were set up at Wando Arboretum in 1996. Twenty plots were divided into ten experimental plots and control plots. A few evergreen broad-leaved species were planted after selective cutting at ten experimental plots. Dominant species of twenty plots were Quercus acuta, Q. acuta and Carpinus tschonoskii, Pinus densiflora, etc.. Vegetation structure of the experimental plots showed seral stage of succession from P. densiflora community or deciduous broad-leaved forest to Q. acuta community. Dominant species of the experimental plots were changed to Q. acuta or P. densiflora after selective cutting. And a number of species and individuals, coverages etc. were increased at shrub and ground cover layer after treatment.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.1
• /
• pp.27-37
• /
• 2000

This study aims at restoring urban forest destructed and eliminated by industrialization, urbanization, and city development and presenting a direction to manage remaining urban forest ecologically. To this end, an experiment zone where Populus tomentiglandulosa T. Lee were selective cutted and a control zone where Populus tomentiglandulosa T. Lee were kept intact were created in Chongdam Park located in Kangnam-ku, Seoul. Then, the structural changes of herbaceous plant species, the growth of targeted woody plants, and the increase of the number of insect and bird species were examined. The conclusions reached in this study are as follows. First, for the sake of ecological restoration and management of urban forest, it is good to selective cutting. Although timing, frequency, and methods may vary depending on the features and types of urban forest, the study revealed that selective cutting contributes to the restoration speed of origin vegetation and the enhancement of biodiversity including plants and insects. Second, as for the correlations of selective cutting and the appearance of plant species, the growth of origin vegetation, and insect distribution, the study showed that the impact of meteorological environment such as brightness is much greater than that of soil environment. Third, in order to manage urban forest, tramping pressure needs to be controlled efficiently. The efficient control of tramping pressure would contribute in the appearance of herbaceous plants. It would also be beneficial in promoting biodiversity of birds by removing the impact of people using routes. Fourth, in order to enhance the overall biodiversity of urban forest, diverse environment needs to be provided. In particular, it is necessary to supply water that is insufficient in urban forest. Providing habitats such as forest wetland performs an important function to amphibians and birds that require water as well as the appearance of aquatic plants and insects. Therefore, ways to introduce water efficiently should be initiated.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.60-67
• /
• 1999

Micro-fabrication techniques such as lithography and LIGA processes usually require large investment and are suitable for mass production. Therefore, there is a need for a new micro-fabrication technique that is flexible and more cost effective. In this paper a novel, economical and flexible method of producing micro-pattern on silicon wafer is presented. This method relies on selective removal of mask by mechanical cutting. Then micro-pattern is produced by chemical etching. V-shaped grooved of about 3 ${\mu}m$ wide and 2 ${\mu}m$ deep has been made on ${SiO_2}m$ coated silicon wafer with this method. This method may be utilized for making microstructures in MEMS application at low cost.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.203-203
• /
• 2012

The SWCNTs network are formed on various plastic substrates such as poly(ethylene terephthalate) (PET), polyimide (PI) and soda lime glass using roll-to-roll printing and spray process. Selective patterning of carbon nanotubes film on transparent substrates was performed using a femtosecond laser. This process has many advantages because it is performed without chemicals and is easily applied to large-area patterning. It could also control the transparency and conductivity of CNT film by selective removal of CNTs. Furthermore, selective cutting of carbon nanotube using a femtosecond laser does not cause any phase change in the CNTs, as usually shown in focused ion beam irradiation of the CNTs. The patterned SWCNT films on transparent substrate can be used electrode layer for touch panels of flexible or flat panel display instead indium tin oxide (ITO) film.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.902-908
• /
• 2013

This paper suggests to compress data selectively for improvement of data compression efficiency, not to perform unconditional compression on data. Whether to compress or not is determined by selective data distinction. By doing so, we can avoid unnecessary compression in the case of low compression efficiency. Cutting down the unnecessary compression, we can improve the performance of the pre-compression algorithm. Especially, the data algorithm which was already compressed could not be compressed efficiently in many cases, even if apply compression algorithm again. Even in these cases, we don't have to compress data unnecessarily. We implemented the proposed function actually and performed experiments with implementation. The experimental results showed normal operation.

• Korean Journal of Environment and Ecology
• /
• v.17 no.4
• /
• pp.316-323
• /
• 2004

In order to monitor the vegetation restoration in the evergreen broad-leaved forest, eighteen experimental plots including control plots were established at Wando Arboretum in 1996. Several treatments such as density control, selective cutting and warm temperate species planting were done in the experimental plots. Seven years after the restoration experiments, the important percentage of Quercus acuta showed a tendency to a higher increase in the experiment plots than control plots in Q. Acutu. Also the important percentage of Q. Acuta in Q. acute Carpinus tschonoskii community increased in the tree layer. Pinus densiflora community was increased highly in important percentage of Q. Acuta, As a whole, vegetation structure in the experiment plot showed successional stage to Q. Acutu community. In addition, important percentage of evergreen broad-leaved trees and shrubs and number of warm temperate species and basal area were increased in the experiment plots while the introduced evergreen broad-leaved trees were declined.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.4
• /
• pp.472-481
• /
• 2015

Objectives: Welding is a major task in shipbuilding yards that generates welding fumes. A significant amount of welding in shipbuilding yards is done on steel. Inevitably, manganese is present in the base metals being joined and the filler wire being used and, consequently, in the fumes to which workers are exposed. The objective of this work was to characterize manganese exposure associated with work area, total and particle size-selective mass concentration, and compare the mass concentrations obtained using a three-piece cassette sampler, size-selective impactor sampler and blood manganese concentrations. Materials: All samples were collected from the main work areas at one shipbuilding yard. We used a three piece cassette sampler and the eight stage cascade impactor sampler for the airborne manganese mass concentration of total and all size fractions, respectively. In addition, we used the results of health examination of workers sampled for airborne manganese. Results: The oder of high concentration of airborne manganese in shipbuilding processes was as follows; block assembly, block erection, outfitting installation, steel cutting, and outfitting preparation. The percentages of samples that exceeded the OES of the ministry of employment and labor by the cassette sampling method was 12.5%, however 59.1% of sampled workers by the impactor sampling method exceeded the TLV of the ACGIH. Conclusions: Even though the manganese concentrations in blood of workers exposed to higher airborne manganese concentration were higher than among those exposed to lower concentrations, there was no difference in blood manganese concentrations among work duration. The data analyzed here by characterizing size-selective mass concentrations indicates that the inhaled manganese of welders in shipbuilding yards could be mostly manganese-containing respirable particle sizes.