• 한국약용작물학회지
• /
• 제13권6호
• /
• pp.234-240
• /
• 2005

본 연구는 강원도 일원에서 수집된 왕머루 (GW-22, GW-45, GW-56, GW-200, GW-202, GW-300)의 화형에 따른 화분 특성 및 포도와 교배친화성을 구명하고자 수행하였다. 각각의 꽃 구조와 화분발아능력, 화분 형태, 화분크기 및 포도와 교배화합성을 조사하였다. GW-22와 GW-56의 꽃은 암술이 퇴화하고, 5개의 수술대가 곧은 직선이었다. 이들 각각의 계통은 인공배지에서 화분발아율은 $27.6{\sim}29.8%$였다. GW-45, GW-200, GW-202, GW-300의 꽃은 잘 발달된 암술과 5개의 수술대가 바깥쪽으로 말린 형태였다. 이들 계통은 모두 인공배지에서 화분발아율은 0%였다. 이들 계통은 자가수분된 머루에서는 과립과 종자를 얻을 수 없었다. 머루간의 상호교배에서는 착과율이 $14.1{\sim}45.4%$였다. 따라서 왕머루의 꽃 형태는 Vitis종의 자웅이주식물이다. 암머루와 수머루의 교배시 정상적인 종자를 형성하였고, 포도와 수머루의 교배시 정상적인종자를 형성하였다. 그러나 암머루와 암머루의 교배시 종자를 형성하지 못하였다. 그러므로 머루는 포도와 상호교배친화성이 있으며, 왕머루계통은 포도속 식물의 육종연구에 기여할 것이다.

• 대한화학회지
• /
• 제39권7호
• /
• pp.578-584
• /
• 1995

$Sr(OH)_2$가 소량 첨가된 수산화칼슘 수용액에 $CO_2$ 가스를 흡수시켜 탄산화 반응을 행하였으며, 이 반응에서 반응온도와 $Sr(OH)_2$가 탄산화반응에 미치는 영향을 조사하였다. 주상형의 aragonite는 반응온도가 높을수록, $Sr(OH)_2(aq)/Ca(OH)_2(aq)$의 비가 클수록, 즉 $OH^-/CO_2(aq)$의 비가 클수록, 잘 생성되었다. $Sr(OH)_2$는 탄산화반응 초기에 aragonite와 유사한 사방정형의 $SrCO_3$를 쉽게 형성하고, 물에 대한 용해도가 높기때문에 $OH^-$ 이온을 증가시켜 용액내에 결정성장에 유리한 $CO_3^{2-}$ 이온을 보다 쉽게 형성시키므로 주상형 aragonite 생성에 유리한 역할을 하였다.

• 한국산림과학회지
• /
• 제46권1호
• /
• pp.21-28
• /
• 1980

채종원(採種園)에서 18년생(年生) 접목묘(接木苗)인 슬래쉬 소나무를 대상(對象)으로 하여, 구과형성(毬果形成)과 가지의 형태학적(形態學的)인 상관관계(相關關係)를 조사했다. 춘기(春期)에 조사한 지당(枝當) 자화수(雌花數)와 상관관계가 가장 큰 것은 전년도(前年度) 신초지(新梢枝)의 지당(枝當) 엽중량(葉重量)이었다. ($R^2=+0.41$). 웅화수(雄花數)는 신초지(新梢枝)의 엽중량(葉重量)과 부(負)의 상관(相關)을 보여주었다. ($R^2=-0.21$). 웅화(雄花)에서 자화(雌花)로의 성전환(性轉換)은 그 가지의 생장력(生長力)(vigor)이 증가함에 따라서 촉진(促進)되었다. 자화(雌花)가 거의 착화(着花)되지 않는 개체목(個体木)의 토부수관(土部樹冠)에서 채취(採取)한 정아(頂芽)와, 자화(雌花)나 웅화(雄花)가 대량(大量)으로 착화(着花)한 개체(個体)의 정아(頂芽)로, 유관속 조직의 생장(生長)을 비교(比較)한 결과, 전자(前者)가 후자(後者)보다 훨씬 빨랐으며, 이는 자화(雌花)를 생산(生産)하지 않는 정아(頂芽)는 강(强)한 영양생장(營養生長)의 경향(傾向)을 나타냄을 뒷받침하는 것이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.389-390
• /
• 2012

In this study, we fabricate a superhydrophobic surface made of hierarchical nanostructures that combine wax crystalline structure with moth-eye structure using vacuum cluster system and measure their hydrophobicity and durability. Since the lotus effect was found, much work has been done on studying self-cleaning surface for decades. The surface of lotus leaf consists of multi-level layers of micro scale papillose epidermal cells and epicuticular wax crystalloids [1]. This hierarchical structure has superhydrophobic property because the sufficiently rough surface allows air pockets to form easily below the liquid, the so-called Cassie state, so that the relatively small area of water/solid interface makes the energetic cost associated with corresponding water/air interfaces smaller than the energy gained [2]. Various nanostructures have been reported for fabricating the self-cleaning surface but in general, they have the problem of low durability. More than two nanostructures on a surface can be integrated together to increase hydrophobicity and durability of the surface as in the lotus leaf [3,5]. As one of the bio-inspired nanostructures, we introduce a hierarchical nanostructure fabricated with a high vacuum cluster system. A hierarchical nanostructure is a combination of moth-eye structure with an average pitch of 300 nm and height of 700 nm, and the wax crystalline structure with an average width and height of 200 nm. The moth-eye structure is fabricated with deep reactive ion etching (DRIE) process. $SiO_2$ layer is initially deposited on a glass substrate using PECVD in the cluster system. Then, Au seed layer is deposited for a few second using DC sputtering process to provide stochastic mask for etching the underlying $SiO_2$ layer with ICP-RIE so that moth-eye structure can be fabricated. Additionally, n-hexatriacontane paraffin wax ($C_{36}H_{74}$) is deposited on the moth-eye structure in a thermal evaporator and self-recrystallized at $40^{\circ}C$ for 4h [4]. All of steps are conducted utilizing vacuum cluster system to minimize the contamination. The water contact angles are measured by tensiometer. The morphology of the surface is characterized using SEM and AFM and the reflectance is measured by spectrophotometer.

• 한국작물학회지
• /
• 제48권4호
• /
• pp.292-296
• /
• 2003

The lateral root formation in soybean sprout culture declines its quality. This study was done to measure the effect of fluorescent light treatment during 24 hour imbibition and 6-day culture on seed germination and growth of soybean sprout. After 6 day culture, the sprouts were sorted as normal (＞4cm), abnormal (＜4cm) and non-germination by their hypocotyl lengths, and lateral roots, fresh and dry weights were measured. Lateral roots were less formed in the fluorescent light treatment lasted during the whole period of the imbibition than in the treatment for 50 minutes a day during the culture. The fluorescent light treatment during the imbibition mainly affected the germination and growth compared to the treatment done during the culture. Compared to the dark imbibition, the light treatment during the imbibition resulted in more normal sprouts, thicker diameters of hypocotyl and hook, and more fresh weights in cotyledon, hypocotyl, whole sprout, and economic yield. However, these results were reverse in lengths of hypocotyl and root, and fresh and dry weights of roots. It is concluded that the fluorescent lamp mainly irradiating red and blue lights can be used for the sprout production as an alternative light replacing blue and red lights treated during the imbibition because it blocked the lateral root appearance and stimulated growth of the sprout.

• 한국환경복원기술학회지
• /
• 제11권2호
• /
• pp.10-18
• /
• 2008

In this study, about 80 Kentucky bluegrass (Poa pratensis L.) ecotypes native to Korea were collected annually to analyze their morphology and growth characteristics from 1995 to 2007. Kentucky bluegrass ecotypes with superior characteristics of 'Pureundle' (Trial No. : P38), 'Sewon' (P77), 'Inje' (00034), 'Donggang' (00052), 'Hwasun' (01001), 'Pyengchang' (01071), 'Kongju' (02006), 'Chungsong' (02077), and 'Kumsan' (03005) and three foreign cultivars were transplanted to flowerpots in May 8, 2006 in order to analyze the blooming and morphological characteristics. Out of the selected superior ecotyes, six were collected on the roadsides, two were collected around paddy or dry fields, and one was collected at riverside. Length of 1st internode of 'Chungsong' was the longest (30.7cm), that of 'Pyengchang' was the shortest (12.8cm), and ecotypes showed variation in length. The 1st angle of branches of 'Donggang' was the narrowest ($141.7^{\circ}$), that of 'Hwasun' was the widest ($188.3^{\circ}$), and that of the introduced foreign cultivars were between $159.3^{\circ}$ and $166.7^{\circ}$. The number of nodes of the introduced cultivars were same (six), while that of Korean ecotypes were four to six. Length of flowering culm of 'Chungsong' was the longest (50.7cm) and while that of 'Pyengchang' was the shortest (19.2cm). 'Donggang' with the highest seed yield showed relatively high (36.8cm) inflorescence height when compared to other ecotypes. The five ecotypes of 'Sewon', 'Inje', 'Donggang', 'Pyengchang', and 'Kongju' were investigated to have relatively wide leaf width. Especially 'Sewon' and 'Inje' were investigated to have wide leaves of 4.5mm and over.

• 아시안잔디학회지
• /
• 제25권1호
• /
• pp.11-16
• /
• 2011

본 연구는 국내 해안 및 도서지역에 자생하고 있는 버뮤다그래스를 지역별로 수집하여 입지환경에 따른 형태적 변이 정도를 알아보고자 수행되었다. 이들 입지환경, 토양의 화학성과 형태적 특성을 조사하였다. 수집된 자생지에 따라 초장, 엽폭, 엽장, 잎털, 포복경 및 화수당 종자수 등에서 큰 변이를 보여 조사 형질 간에 다양한 변이를 보이는 것을 확인할 수 있었다. 광엽과 세엽 특성의 버뮤다그래스가 존재하고 있었으며, 광엽형의 버뮤다그래스의 경우 열악한 환경에서의 적응성이 매우 높아 중 저관리의 잔디면에 이용 가치가 높을 것으로 생각된다. 상기 입지 환경과 형태적 특성 조사 결과 및 수집된 유전자원들은 앞으로 유전자원으로서 보존 가치가 높으며, 유용유전자를 보존할 수 있는 체계가 마련되어야 할 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.412-412
• /
• 2014

Zinc oxide (ZnO) is one of the most powerful materials for purifying organic pollutants using photocatalytic activity. In this study, we have introduced a novel method to design highly photoreactive flexible 3 dimensional (3D) ZnO nanocomposite [F-ZnO-m (m: reaction time, min)] by electrospinning and simple-step ZnO growth processing (one-step ZnO seed coating/growth processing). Significantly, the F-ZnO-m could be a new platform (or candidate) as a photocatalytic technology for both morphology control and large-area production. The highest photocatalytic degradation rate ([k]) was observed for F-ZnO-m at 2.552 h-1, which was 8.1 times higher than that of ZnO nanoparticles (NPs; [k] = 0.316 h-1). The enhanced photocatalytic activity of F-ZnO-m may be attributed to factors such as large surface area. The F-ZnO-m is highly recyclable and retained 98.6% of the initial decolorization rate after fifteen cycles. Interestingly, the F-ZnO-m samples show very strong antibacterial properties against both Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) after exposure to UV-light for 30 min. The antibacterial properties of F-ZnO-m samples are more effective than those of ZnO NPs. More than 96.6% of the E. coli is sterilized after ten cycles. These results indicate that F-ZnO-m samples might have utility in several promising applications such as highly efficient water/air treatment and inactivation of pathogenic microorganisms.

• 한국약용작물학회지
• /
• 제22권6호
• /
• pp.463-468
• /
• 2014

This study was carried out in order to survey the soil physico-chemical, morphology and content of saponins of 5 year-old Platycodon grandiflorum radix from different areas in Gyeongnam. Soil physical properties was showed 1.01-1.29 of bulk density of soil and soil hardness was increased with increasing soil depth, especially below the 30 cm, however it was maintained or small increased below the 40 cm. T-N and OM contents of top soil were highest at Geochang as 0.27% and 56.9 g/kg, respectively, compared to other areas. The root length was longer at Kimhea and Geochang as 33.8 and 33.7 cm, respectively, and fresh weight was heavy at Geochang as 208.5 g. The contents of saponin of P. grandiflorum radix was higher in fine root compare to main root. By region, content of saponins of P. grandiflorum radix were higher at Hapcheon than other area. Mg content was highly negatively correlated at p < 0.01 with platycodin D3, deapioplatycodin D, platycodin D, and deapioplatycodin D ($-0.499^{**}$, $-0.433^{**}$, $-0.421^{**}$, $-0.511^{**}$ respectively). These results suggest that no-fertilized Mg effected on the improvement of saponin contents in P. grandiflorum.

• Journal of Electrochemical Science and Technology
• /
• 제7권2호
• /
• pp.132-138
• /
• 2016

In this study, we report the fabrication of functional complex fibers, which have been studied widely globally for numerous applications. Here, we fabricated conductive complex fibers with antibacterial properties by coating metal ions on the surface of plastic (polypropylene) fibers using the electroless and electrochemical deposition. First, we polished the polypropylene melt-blown fiber surface and obtained an absorbing Pd seed layer on its surface. Subsequently, we substituted the Pd with Cu. Bis-3-sulfopropyl-disulfide disodium salt (SPS), polyethylene glycol (PEG), and ethylene thiourea (ETU) were used as the brightener, carrier, and leveler, respectively for the electroplating. We focused on most achieving the stable plating condition to remove dendrites, which are normally during electroplating metals so that smooth layer is formed on the fiber surface. The higher the amount of SPS, the higher was the extent of irregular plate-like growth. Many irregularities in the form of round spheres were observed with increase in the amount of PEG and ETU. Hence, when the additives were used separately, a uniform coating could not be obtained. A stable coating was obtained when the three additives were combined and a uniform 5-9 μm thick copper layer with a stable morphology could be obtained around the fiber. We believe that our results can be applied widely to obtain conductive fibers with antibacterial properties and are useful in aiding research on conductive lightweight composite fibers for application in information technology and robotics.