• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.589-590
• /
• 2008

Sound absorption characteristics of audience seating is very important when design and simulate room acoustics of concert halls or multi-purpose auditoriums. Sound absorption characteristics of audience seats were measured in reverberation chamber by varying the row to row spacing and number of audiences. By the increment of the row to row spacing, sound absorption characteristics in mid frequency band was increased. Also, sound absorption was proportionated to the number of audience.

• Journal of KSNVE
• /
• v.7 no.1
• /
• pp.143-152
• /
• 1997

This paper introduces experimental results of the ride qulaity characteristics of automotive seats fixed on the vibration table that is noving simultaneously to the three-axis in a similar way to the real running condition. Vibration experiment was carried out for five different automotive seats and four Korean individuals. The assessment of the ride quality characteristics for each seat and indiviual was made not only from the analysis of vibration measurements but also from the evaluation of weighied vibration signals, which were obtained using the frequency weighting function and the multiplication factor dependent on the position and axis of vibration exposure to wehole-body. The usefulness of those assessment results in analysis of the ride quality of seats is discussed and their limitation is also pointed out in this paper.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.994-995
• /
• 2014

Supporting stiffness of seats is an important component affecting dynamic characteristics cognized by a passenger. To analyze dynamic characteristic of a seat for vehicles operating on various road conditions, the seat vibration from road irregularity should be understood and compared. In this study, the seat is analyzed as distributed supporting system. The dynamic stiffness is measured using masses. The characteristic of the seats is analyzed by measuring distributed dynamic stiffness. The distributed dynamic stiffness of the seat is estimated on various locations and the effects of each component such as spatial distribution, compression level and vibration amplitude are analyzed. The influence of seat cover, elastic support and flexible polyurethane foam on the measured stiffness was analyzed.

• Journal of the Korean Institute of Rural Architecture
• /
• v.14 no.1
• /
• pp.45-56
• /
• 2012

This study focuses on design of supplementary evaluation indicator system geared towards comprehensive rearrangement projects in seats of township and town offices. In the first phase, it tries to reveal major problems and issues related to evaluation of the existing small town promotion projects. In terms of analytical tools, this study depends on the Delphi and AHP techniques. In specific, after three rounds of the Delphi methods, it extracts a series of alternative evaluation indicators derived from the AHP methods. It covers 5 major evaluation criteria, under which 18 independent items are hierarchically interconnected. It expects that these alternative evaluation indicators would contribute to selecting appropriate small town promotion projects. Next, applying these evaluation indicators, we examine couples of comprehensive rearrangement projects in seats of township and town offices. From the comparative contexts, we believe that the proposed alternative evaluation criteria would improve the general satisfaction level of key stakeholders in deciding the priority order of the small town promotion projects.

• Journal of the Korean Institute of Rural Architecture
• /
• v.16 no.4
• /
• pp.35-42
• /
• 2014

This study aimed to explore the methods to provide life service for hinterland villages, which is the biggest function of the seat of myeon in rural areas, and enhance central functions/roles. This study also aimed to provide basic information to establish a direction of the future projects of the seat of myeon through empirical study on the comprehensive improvement projects of the seats of eup and myeon and related demanders' perception for sustainable rural area. Based on the results, a variety of hardware manuals are correspondent with present rural situations in the comprehensive improvement projects of the seats of eup and myeon. Therefore, community-based welfare facilities should be expanded. Also, village infrastructure facilities and village landscape projects should be promoted to improve pedestrian environment. Finally, switching into an ecological environment project should be considered to improve village environment as well as supply energy saving facilities.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.12
• /
• pp.1361-1366
• /
• 2015

In Korea, the special seats for vulnerable users such as the elderly and pregnant woman are provided. However, the usage of seats is very low due to the ignoring or lack of recognition about pregnant woman even though pregnant woman approaches the seat. In this paper, we first consider the problem of special seats for pregnant woman and propose the wireless communication based pregnant alarm service which announces approaching of pregnant woman when pregnant woman moves toward the seats for pregnant woman. First, the service concept and scenario are introduced. Then, we deal with wireless communication technologies which provides the alarm service and their properties. In addition, we discuss implementation issues for realizing the proposed system.

• Clinical and Experimental Pediatrics
• /
• v.61 no.12
• /
• pp.381-386
• /
• 2018

Purpose: The use of proper safety restraint systems by children is vital for the reduction of traffic accident-related injury and death. This study evaluated the rates of use of safety restraint systems and front seats by Korean children. Methods: Based on data from the National Health and Nutrition Examination Survey from 2008 to 2015, I investigated the frequencies of safety restraint systems and front seat use by children under six and 12 years of age, respectively. Results: The percentage of respondents who said they always use safety restraint systems increased from 17.7% in 2008 to 45.0% in 2015. The rate of children who did not use the front seats at all was 47.3 % in 2008 compared to 33.4% in 2015. Multivariate logistic regression analysis showed a decrease in safety-restraint-system use as age increased (odds ratio, 0.63; 95% confidence interval [CI], 0.51-0.77). The use rate of front-passenger seat belts by the mother is significantly correlated with the safety-restraint-system use rate by children (odds ratio, 2.14; 95% CI, 1.12-4.06). Conclusion: Although the rate of safety-restraint-system use for children is increasing annually, it remains low. Additionally, the use rate of front passenger seats for children is high. To reduce the rates of injury and death of children from traffic accidents, it is necessary to educate on the appropriate use of safety restraint systems according to age and body size and to develop stronger regulations.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.2
• /
• pp.179-193
• /
• 2012

The development of modern transportation technology has required many people in spaces (such as vehicle seats, airports, and train stations) for long periods. The public seats provided in these places are manufactured in a standard size; however, fatigue sets in if the seats are unsuitable for the person's physical size. For this reason, this study developed an air cushion vest that would enhance the comfort of vehicle seats. Passengers in vehicles, trains, airplanes, and buses were observed and surveyed to understand the demand for seat comfort. Our analysis found that the greatest source of discomfort was involuntary nodding of the head while asleep and discomfort around the waist area. For this reason, the air cushion vest was designed to support the head and the waist. The neck cushion of this vest was designed to strengthen head support to counter forward nodding because existing commercial neck cushions had no support for forward nodding. For the waist cushion, at lumbar and below-lumbar parts were chosen as the key parts to be supported, the cushion was designed to contain air at those parts. To cover the embedded waist cushion, the vest was designed to be long. The closure was constructed with zippers from the neck to waistline, and with invisible snaps from the waistline to the hemline so that the wearer could open them easily while seated. A subjective comfort evaluation was conducted to verify the effectiveness of the developed vest. In the test, the developed cushions received a better evaluation than cushions currently available on the market. The volume of the vest could be adjusted by the inflow and outflow of air. It was proven that the vest was effective in terms of comfort and portability. This shows that the developed vest could enhance passenger comfort while sitting on vehicle seats.

• Science of Emotion and Sensibility
• /
• v.17 no.1
• /
• pp.29-38
• /
• 2014

In recent days, according as ergonomics and aesthetic engineering are important factors in the product market, there is a demand to develop automobile seat and interior designs which are focused on sensitive elements such as aesthetic and comfort features in order to satisfy the sensitive needs of consumers. To meet such demands, car seats are turning into functional and sensitive products that reflect elements of function and entertainment. According to such trends, this research is aimed to develop the illuminating car seat fabric that serve such functions as recognizing and reacting to car environments, which includes sensing over-speed, open doors, and unfastened safety belts through the illuminating car seat fabrics by optical fiber. For this purpose, basic physical properties of optical fiber are analyzed, appropriate weaving and etching technologies are applied, and the woven fabric of optical fiber for car seats are illuminating depend upon car environments. Moreover, the applicable woven fabric of optical fiber is deduced after evaluating the physical properties (such as tensile strength, heatproof, anti-fouling, washable and combustible traits) for the appropriateness of applying the woven fabric of optical fiber to car seats. For this purpose, the woven fabric of optical fiber is covered according to car seat processes; the optical fiber applied to seats is composed that it may be connected to one end of the connector linked to a LED so that it may perform functions like sensing over-speed, open doors, and unfastened safety belts; the sensed signals are transmitted to the control part, and luminescent signals are transmitted to LED.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.3
• /
• pp.110-116
• /
• 2009

Research for climate control seats is being vigorously pursued because requests for passenger's thermal comfort are increasing. Recently, thermoelectric devices have been applied to automotive seats for both cooling and heating operations. The climate control seats using thermoelectric devices can rapidly control the air temperature passing through the devices and directly affect the thermal comfort of passengers. The performance characteristics of the climate control seats were analyzed by experiments for two different types of a leather covered seat and a mesh applied seat. Experimental results show that the cooling and heating performance for the mesh applied seat by using the discharge port of the shape of nozzle was improved significantly in comparison with that for the leather covered seat. The variation of temperature between the inlet air and the outlet air of the climate control seat for the enhanced mesh applied type was by $-3.5^{\circ}C$ at cooling mode, and was by $15.0^{\circ}C$ at heating mode, after about 30 minutes, respectively. Also, it is possible to provide rapid thermal comfort to passengers sitting on the seat in the vehicle cabin by using the proposed climate control seat.