• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.61-70
• /
• 2020

In this study, the IOT-based desk layout method was proposed to complement the existing seating method and to improve the work efficiency. The IoT system for the desk layout needs determining the function, type and network protocol of the sensor to find out the working status of the desk to reasonably assist the worker's seat placement. A collection method was proposed. The algorithm used in Block Stacking was used when deciding how to allocate seats using the acquired data. As a result, we could suggest an arithmetic basis for rational desk layout in IoT environment and show that it can be applied to an advanced flexible seating system based on working type in addition to the preferences of employees in the future.

• Journal of Auto-vehicle Safety Association
• /
• v.4 no.2
• /
• pp.37-43
• /
• 2012

The purpose of this research is to obtain and analyze dynamic responses from human volunteers for the development of the human-like mechanical or mathematical model for Korean males in automotive rear collisions. This paper focused on the introduction to a low-speed rear impact sled test involving Korean male subjects, and the accumulation of the motion of head and neck. A total of 50 dynamic rear impact sled tests were performed with 50 human volunteers, who are 30-50 year-old males. Each subject can be involved in only one case to prevent any injury in which he was exposed to the impulse that was equivalent to a low-speed rear-end collision of cars at 5-8 km/h for change of velocity, so called, ${\Delta}V$. All subjects were examined by an orthopedist to qualify for the test through the medical check-up of their necks and low backs prior to the test. The impact device is the pendulum type, tuned to simulate the crash pulse of a real vehicle. All motions and impulses were captured and measured by motion capture systems and pressure sensors on the seat. Dynamic responses of head and T1 were analyzed in two cases(5 km/h, 8 km/h) to compare with the results in the previous studies. After the experiments, human subjects were examined to check up any change in the post medical analysis. As a result, there was no change in MRI and no injury reported. Six subjects experienced a minor stiffness on their back for no more than 2 days and got back to normal without any medical treatment.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.2
• /
• pp.65-69
• /
• 2011

The $Tio_2$ films were prepared on glass, silicon and quartz substrate at different temperature by radio frequency reactive magnetron sputtering under different flow ratios of Ar and O2 gases. The films were characterized by X-ray diffractometer (XRD), scanning electron microscope (SEM), atomic force microscope (AFM) and UV-VIS spectrophotometer. Only the anatase phase was observed in films and their diffaction peaks increased with temprature of substrate. The size of crystallites decreased with higher concentration of oxygen. Refractive index and optical absorption of thin films decreased with higher concentration of oxygen. The thin films which have good transmittance spectra and smooth surface, deposited in the sputtering ambient with 10 % of $O_2$ at the temperature from $400{\circ}C$ to $300{\circ}C$.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.1
• /
• pp.45-49
• /
• 2015

In this clinical report, a simple and convenient conversion of a fractured metal-ceramic surveyed crown into a complete contour zirconia surveyed crown by using computer-aided design and computer-aided manufacturing technology for an existing partial removable dental prosthesis is described. The duplication of the original contours, morphology, and the rest seat of the existing metal-ceramic surveyed crown, into a complete contour zirconia surveyed crown under anticancer treatments were reported.

• Journal of Korean Society of Steel Construction
• /
• v.30 no.1
• /
• pp.37-48
• /
• 2018

Cyclic loading tests for shear dominant hybrid steel link beams with circular web openings were performed to evaluate the seismic performance. Four half-scaled specimens with bolted connections were tested. The test parameter is a diameter of the web opening, i.e., shear strength ratio ($V_{pw}/V_p$) of the link beam and presence of top-seat angles. Using test results, adequate design shear strength of link beam was finally suggested. Test results showed that when the shear capacity is less than half of the plastic shear strength, seismic performance was improved due to mitigation of pinching under reversed cyclic inelastic deformations.

• Fashion & Textile Research Journal
• /
• v.20 no.5
• /
• pp.583-591
• /
• 2018

This study investigated the current production of women's sportswear tights among a total of 813 yoga, gym and training tights on the market to provide basic data for the development of women's sportswear tight tops. The results found the following: First, according to the analysis of women's sportswear tight tops by brand, polyester, nylon and polyurethane were most used. In addition, elastic, breathable and quick-dry, sweat absorbent products were commonly found. In terms of design, crew neck and sleeveless styles were popular. In addition, mesh was frequently applied to the top of the chest and upper part of the back. The size was mostly marked in S, M and L, and the size range was very large by brand. For color, achromatic color was most common. In terms of price, 'KRW 50,000-100,000' was frequently found. Second, yoga tights were compared to gym & training wear. In the case of yoga tights, elastic, various products in diverse design (e.g., crew neck, sleeveless, long sleeve, etc.) and colors (e.g., red, black, etc.) made of breathable and water-absorbing fabric were most produced. In particular, a combination of mesh materials was common. In gym and training wear, crew neck and short-sleeve styles in achromatic color made of elastic, breathable and quick-dry, seat absorbing fabric were most produced.

• Korean Institute of Interior Design Journal
• /
• v.19 no.2
• /
• pp.136-143
• /
• 2010

This study aims to seek a direction of development in apartment interior planning method, considering residential condition and historical planning schemes in South Korea and China. In this study, South Korea and China's traditional housing and modern apartment unit was studied to identify environmental attributes of residence. For Korea, Banga, where upper class residents lived, and modern urban Hanok were chosen to be analyzed. For China, two types of housing wear studied: Sahapwon, original form of China housing, and Yinong house which is a typical Sanghai house. First, the elements of living environment in two major cities; Seoul and Sanghai was defined to analyze factors of traditional houses in both cities. Depending on those factors, relationship among traditional and modern housing types were compared and analyzed, focusing on unit plan case studies for a better understanding of living environment in South Korea and China. From this study, similarities and differences between apartment plans in Seoul and Shanghai was examined according to their residential style, surrounding natural environment and lifestyle factors. In Seoul's apartment, spacial composition and movement lines were mainly formed around the public space in Seoul, while public space of living and dining room was located at housing entrance area in the Shanghai's residential system, configuring narrow form of housing unit. In respect of the natural environment, the unit plan of rectangular form in Seoul was more efficient in day lighting and wind circulation than the unit plan of narrow form in Shanghai. It was also found that cultural differences of stand-up and seat life style influenced on the composition of unit plans in Seoul and Shanghai.n Apartment cases in Seoul and Shanghai.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.12
• /
• pp.1131-1138
• /
• 2007

This paper studies experimentally on the building-up process for the amplitude of a commercial truck vibration induced by brake judder. A front axle drum equipped with a drum brake system is utilized for this experiment. A brake dynamo test, a real vehicle ride test and a real vehicle braking test are performed for the analysis of brake judder. The brake dynamo test measures judder by applying brake chamber pressures of 1, 2 and 3 bar at initial brake pad temperatures of $100^{\circ}C$ and $150^{\circ}C$. In order to assess the vertical acceleration at the front axle, the real vehicle ride test on a straight test road with velocities of 20, 40, 60 and 80 km/h is performed. The real vehicle braking test is carried out at the deceleration rate of 0.2g from a velocity of 90km/h for evaluating the vertical, lateral and longitudinal accelerations both at the front axle and at the cab floor under the driver's seat. The magnitudes and frequencies of the measured peak accelerations from the brake dynamo test, the real vehicle ride test and the real vehicle braking test are comparatively analyzed. This paper shows that the vibration produced by brake judder is built up due to the brake system's peak acceleration frequency being close to the vehicle ride mode's frequency.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1996.11a
• /
• pp.42-48
• /
• 1996

Glare phenomenon by sun's altitude and strong sunlight make a much visual handicap. And so, it reaches to unreadable situation although enough illumination in the fore site student of a window site and passage site. In school student seat arrange in the order of their height. So, cause the eyesight acuity according to distance is different, eyesight of backseat's student drop 1.0 and less in spite of 1.0, a learning effect reduces rather then that of the fore site student for site and Passage sitestudents. Therefore. in school, the conclusion's alteration of school structure, position's alteration and material quality's improvement of blackboard are needed, should be local lighting in blackboard. Therefore, we think that in other in improve the effect of lesson by the student, the student seats are not given by uniform disposition in the order of their height but change by a specified period.

• International Journal of Ocean System Engineering
• /
• v.2 no.4
• /
• pp.209-213
• /
• 2012

Recently, the fuel using in the diesel engines of marine ships has been changed to a low quality of heavy oil because of the steady increase in the price of oil. Therefore, the wear and corrosion in all parts of the engine such as the cylinder liner, piston crown, and spindle and seat ring of exhaust valves has correspondingly increased. The repair welding of a piston crown is a unique method for prolonging its lifetime from an economic point of view. In this case, filler metals with a high corrosion and wear resistance are mainly being used for repair welding. However, often at a job site on a ship, a piston crown is actually welded with mild filler metals. Therefore, in this study, mild filler metals such as CSF350H, E8000B2, and 435 were welded to SS401 steel as the base metal, and the corrosion properties of the weld metals with and without post weld heat treatment were investigated using some electrochemical methods in a 0.1% $H_2SO_4$ solution. The weld metal welded with CSF350H filler metal exhibited the best corrosion resistance among these filler metals, irrespective of the heat treatment. However, the weld metal zones of the E8000B2 and 435 filler metals exhibited better and worse corrosion resistance with the heat treatment, respectively. As a result, it is suggested that in the case of repair welding with CSF350H and 435 filler metals, no heat treatment is advisable, while heat treatment is desirable if E8000B2filler metal is used with repair welding.