• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.336-345
• /
• 2010

GS E&C was awarded the contract for the construction of Hanoi - Hai Phong Expressway Package EX-7 from Station Km 72+000 to Station Km 81+300 in December 2008. This project is the $7^{th}$ contract package of the 105.5 km long expressway near Hai Phong city, which includes a FCM-styled bridge along with high embankments over soft ground. For these high embankments, there is a need to treat the soft soil for improving the overall stability during construction and for reducing the post-construction settlement of the expressway. The Designer of this project had adopted four (4) different types of ground improvement techniques to treat the soft ground, including the prefabricated vertical drains (PVD), sand drains (SD), pack drains (PD, or sometimes called packed sand drains), and sand compaction piles (SCP). The main focus of soft soil treatment should be paid attention to the residual settlement after construction. In current design, however, it appeared that the secondary compression (or creep) of the improved soil layer and the consolidation settlement of the lower untreated compressible soil layer have been neglected in the estimation of the post-construction settlement. These uncalculated residual settlements may not only unsatisfy the design criteria but also raise serious problems during service period of this expressway. In this paper, the subsoil condition and current design were reviewed focusing on the employed soft soil treatment method and expected residual settlement.

• Journal of Power System Engineering
• /
• v.16 no.6
• /
• pp.52-58
• /
• 2012

Roll forming process is one of the most widely used processes in the world for forming metals such as a furniture drawer guide or an up and down slide guide. It can manufacture goods of the uniform cross section on a large scale throughout the continuous processing. In the domestic design and manufacture, roll forming process for production is taking most of the method of 2-point under rail slide. However, this method is vulnerable to the structural strength and stiffness is not suitable for high load conditions. Therefore, through systematic study of high load, low noise 3-point ball type of under rail slide its own design and manufacturing technology is the need to build. In this paper, to make center member of 3-point ball-type under rail slide for the refrigerator doors, the roll forming modeling and simulation are performed. Tensile test is performed about SCP-1 1/2H for determine the mechanical properties of materials. Modeling and simulation of roll forming is used MSC.MARC software of a dedicated analysis program used by rigid plastic finite element method. Interference between the roll and the final shape are predicted from the results of the simulation.

• Applied Biological Chemistry
• /
• v.37 no.4
• /
• pp.226-233
• /
• 1994

Three hundred and one cellulolytic bacterial were isolated from the 148 screening sources such as decomposed wood, soil, compost and leaf mold. Among them, strain KL-6 was found to have the highest of cellulase activity, and identified as species belonged to the genus Cellulomonas. Strain KL-6 was decompose up to 90% of the filter paper (whatman No. 1) substrate within 50 hours, and showed the colony halo formation (11 cm). The activities of CMCase (67 unit/ml), FPase (70 unit/ml) and ${\beta}-glucosidase$ (0.68 unit/ml) were obtained when this strain was cultured for 50 hrs at $30^{\circ}C$. Glucose was not found in detectable amounts at the FP medium. The optimum composition of nutrient medium for the cell growth by strain KL-6 was sucrose 0.5%, yeast extract 0.1%, $(NH_4)_2HPO_4\;0.1%$, $K_2HPO_4\;0.1%$, $MgSO_4{\cdot}7H_2O\;0.01%$, $CaCl_2\; 0.01%$, NaCl 0.6%, $CaCO_3\;0.1%$ and the optimum pH and temperature were 7.0 and $30^{\circ}C$, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1095-1104
• /
• 2000

In recent years, medical procedures have become more complex, while financial pressures for shortened hospital stays and increased efficiency in patient care have increased. As a result, several shortcomings of present film-based systems for managing medical images have become apparent. Maintaining film space is labor intensive and consumes valuable space. Because only single copies of radiological examinations exist, they are prone to being lost or misplaced, thereby consuming additional valuable time and expense. In this paper, mini-PACS for image archiving, transmission, and viewing offers a solution to these problems. Proposed mini-PACS consists of mainly four parts such as web module, client-server module, internal module, acquisition module. In addition, mini-PACS system includes DICOM converter that non-DICOM file format converts standard file format. In client-server module case, proposed system is combined both SCU (service class user: client) part and SCP(service class provider: sewer)part therefore this system provides the high resolution image processing techniques based on windows platform. Because general PACS system is too expensive for medium and small hospitals to install and operate the full-PACS. Also, we constructed web module for database connection through the WWW.

• Korean Journal of Agricultural Science
• /
• v.3 no.2
• /
• pp.244-250
• /
• 1976

Candida brumptii was one of the best isolates which could grow on alcohol distillation slops (reported in the previous paper). Attempts were made to investigate the cultural conditions for cell mass production by this strain, and the results obtained were as follow. The supernatant of the alcohol distillation slops without dilution support ed better growth of the strain than diluted ones. The addition of ammonium sulfate (0.2%), ammonium phosphate (0.1-0.2%), potassium phosphate (0.2%) to the supernatant resulted in positive effects for the growth, among the various inorganic nitrogen and other salts supplements. BOD and COD of the supernatant were reduced approximately 30% and 20%, respectively in 3 days culture. Cell production was maximized when grown at $35^{\circ}C$ and pH 5.0. The yield of cell mass was 1.03% by dry weight and its crude protein content was about 52.65%

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1228-1236
• /
• 2006

In soft ground, There are many case that Bridge Abutment is constructed after soil improvement in order to reduce the Negative Friction and prevent from Lateral Soil movements of Bridge Abutment. That section of Horizontal Subgrade Reaction $Modulus(K_h)$ derivation has much important mean due to Horizontal Stability of Abutment. It is come from behavior of Pile and Soil within depth of $1/\beta$. After Soil Improvement, however, If Bridge Abutment was construction, It's not impossible to carry out Field Investigation After Ground of Improved at design stage. Therefore, It's not able to derivate Horizontal Subgrade Reaction $Modulus(K_h)$. Therefore, in this case of study compare with Field Construction Test Data in order to derivation of Horizontal Subgrade Reaction $Modulus(K_h)$ and Reliability in terms of ground of Bridge Abutment by Sand Compaction Pile(SCP) during design of The 2nd Bridge Connection Road of Incheon International Airport. In this paper determine, Soil Property(The rate of strength increase, $c_u$ so on) and Horizontal Subgrade Reaction $Modulus(K_h)$ after soil improvement at design stage.

• Journal of Welding and Joining
• /
• v.32 no.5
• /
• pp.32-43
• /
• 2014

Welding and joining technology has become a core field. Therefore it is more widely applied to nonferrous metals, inorganic and polymeric materials. That is because the high performance, high function and diversification trend of materials used as industrial technology develops. In the laser welding process, STS 304 and SCP1-S were used as the base materials, the output density was fixed $7MW/cm^2$, the protective gas was argon(Ar) and the transfer rate was fixed 5 mm/sec. and it was progressed while the magnetic field is gradually increasing by 100 mT ranging 0 to 400 mT. The tensile test showed in average about 6 % tensile strength improvement in the case of the laser welding process using the magnetic fields. In the shielded metal arc welding process using SPHC only or the combination of SPHC+STS304 as base materials. The electric current was set at 80 Amperes and the protective gas used argon(Ar) the same as the laser welding process and the strength of magnetic fields. In the shielded metal arc welding process using the magnetic fields, the tensile tests showed about 5 % tensile strength improvement in the case of using SPHC only, 3 % tensile strength improvement in the case of using the combination of SPHC+ STS304. In comparing the results of numerical analysis to the results of experimental tests, it was revealed that the temperature, thermal stress distribution and the behavior of molten pool were similar to those of real tests. Consequently, it may be considered that the numerical assumption and the analytical model used in this study were reasonable.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.1
• /
• pp.19-24
• /
• 2000

To make stacked chip packages far high-density packaging of memory chips used in workstations or PC severs, several lead-frames are to be connected vertically. Fer this purpose. Sn or Sn/Ag were electrochemically deposited on Cu lead-frames and their microstructures were examined by XRD and SEM. Then, two specimens were annealed at $250^{\circ}C$ for 10 min. and pressed to be joined. The shear stresses of joined lead-frames were measured fur comparison. In the case of Sn only, $Cu_3Sn$ was formed by the reaction of Sn and Cu lead-frames. In the case of Sn/Ag, besides $Cu_3Sn$. $Ag_3Sn$ was formed by the reaction of Sn and Ag. Compared to joined specimens made from Sn only, those made from Sn/Ag showed 1.2 times higher shear stress. This was attributed to the $Ag_3Sn$ phase formed at the joined interface.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.15 no.4
• /
• pp.24-31
• /
• 1986

A methanol-assimilating yeast for the production of Single Cell Protein was isolated from the soil and identified. Methanol as a sole carbon source was used in this study. The strain was identified as Candida boidinii which grew best at the initial concentration of methanol at 2% , with the addition of 0.5% methanol at every 12 hours, The Single Cell Protein production was maximal after 72 hours of incubation at pH 5.0, $30^{\circ}C$. Thiamin and biotin were stimulated the growth of this yeast at the levels of $1000{\mu}g/{\ell}$ and $10{\mu}g/{\ell}$respectively.

• Microbiology and Biotechnology Letters
• /
• v.5 no.3
• /
• pp.127-131
• /
• 1977

Various kinds of native herbage grasses like-Miscanthus sinensis, Arundinella hirta, Cymbopogen geirngii, Themeda japonica etc. are widely distributed in every Korean mountain. So we investigated the availability of native grass, Miscanthus sinensis as a substrate for the production of S. C. P. The results were obtained as follows. 1) At the alkali treatment, NaOH was the most effective with the exclusion of lignin, and pretreated Miscanthus with NaOH appeared to be a good substrate for the microbial growth. 2) When Miscanthus was treated with one to 10％ NaOH, the microbial growth increased in proportion to the increased alkali concentration. Beyond 4％ NaOH, a slight increase was observed. 3) Phosphoric acid, as a neutralizer, was the most effective in cell production after alkali treatment. 4) On the effect of incubation time, the productivity was best found at 60 hours, and the cell weight was 9.23 mg per 1 ml, and the microbial digestibility of substrate was 75.2％.