• FLOWER RESEARCH JOURNAL
• /
• v.18 no.3
• /
• pp.165-170
• /
• 2010

This study was carried out to investigate the effect of three different growth retardants for applying pot or bedding plant with 'Rialto', 'Elodie', and 'Raizan'. Ancymidol, uniconazole, and paclobutrazol were applied as a drench at various concentrations. In Oriental hybrid lily 'Rialto', no changes were observed not only plant height but also leaves and flowers in paclobutrazol treatment. But the growth of plant treated with ancymidol was inhibited above 30% compare to control regardless of concentrations. However, numbers of leaf and flower per plant were similar to those of controls. Plant height was similar to nontreated control in $1mg{\cdot}L^{-1}$ uniconazole treatment but that reduced about 30% in drench application of 5 and $10mg{\cdot}L^{-1}$ uniconazole. Asiatic hybrid lily 'Elodie' was not different in growth between application of paclobutrazol and nontreatment as 'Rialto'. While, in all ancymidol treatments, plant height was 50~60% shorter than that of control. Also, numbers of leaves were reduced and days to flowering were slightly delayed in $30mg{\cdot}L^{-1}$ ancymidol treatment as compared with the control. All traits except plant height of $1mg{\cdot}L^{-1}$ uniconazole were similar to control but there were differences of statistical significance between 5, $10mg{\cdot}L^{-1}$ uniconazole drench and nontreated control. Lilium ${\times}$ formolongi 'Raizan' like above two cultivars had no dwarf effect on height in paclobutrazol treatment. In drench application of ancymidol, plant height reduced over 60% than that of control regardless of concentrations. Especially, days to flowering were a little delayed with $30mg{\cdot}L^{-1}$ paclobutrazol treatment. Plant height of $10mg{\cdot}L^{-1}$ uniconazole was about 26% shorter than that of control, but other traits were no differences between uniconazole treatment and control. In result, the drench application of ancymidol and uniconazole was pretty effective for usage as pot lily without great changes of quantitative traits.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.2
• /
• pp.128-136
• /
• 2009

To obtain pure lines for breeding $F_1$ varieties of spreading surfinia and wave petunia, Petunia ${\times}$ hybrida, 20 lines of surfinia petunia and 28 lines of wave petunia that were considered uniform in growth and flowering characteristics were selected by self-pollination of the fifth($S_5$) or the seventh generation($S_7$). The 20 selected lines of surfinia petunia had the branch number ranged from 6.0 to 11.0 cm, and the internode length ranged from 2.0 to 4.2 cm. Among them, ten lines, including '$Pe99-017^7$' were above 60 cm of plant width, above 300 leaves in a plant. Fourteen lines including '$Pe99-017^7$' were more than 150 in the number of flower. In the petal color, thirteen lines, including '$Pe99-017^7$', were red-purple; three, including '$Pe99-007^7$', were purple; '$Pe04-086^7$' and '$Pe04-159^7$' were violet; and line '$Pe072-1^7$' was white. Eight lines including '$Pe02-205-2^5$' ranged from 4.0 to 5.0 cm of flowers diameter, and seven lines including '$Pe04-086^5$' ranged from 3.0 to 4.0 cm of leaf length, which is relatively low. Germination rate of the lines was more than 50%. In the wave petunia, the branch number of the 28 selected lines ranged from 8.0 to 13.0 cm, and the internode length ranged from 1.0 to 3.2 cm, which is relatively higher than surfinia petunias. Among them, ten lines, including '$Pe99-020^7$' were above 60 cm of plant width, above 200 leaves in a plant. Twelve lines including '$Pe04-034-2^5$' were more than 150 in the number of flower. In the petal color, eighteen lines, including '$Pe99-020^7$', were red-purple; three, including '$Pe04-113-4^5$', were red; three, including '$Pe04-263^5$', were white; '$Pe04-201^5$' and '$Pe04-263^5$' were violet blue; and line '$Pe04-072-5^5$' was purple. Nine lines including '$Pe04-201^5$' ranged from 4.0 to 5.0 cm of flowers diameter, and eleven lines including '$Pe04-263^5$' ranged from 3.0 to 4.0 cm of leaf length, which is relatively low. All the lines with various growth and flowering characteristics would be very promising to use as breeding materials for $F_1$ hybrids of spreading petunia, Petunia ${\times}$ hybrida.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.1
• /
• pp.36-43
• /
• 2008

This purpose of this study was to examine the effect of planting density, growing medium and strength of a nutrient solution (National Horticultural Research Institute's nutrient solution: HRI's) on the growth and development of Oriental hybrid lily 'Le Reve' in a box cultivation. The planting density with 14, 18 and 22 bulbs had sprouting one day earlier than other treatments. Planting density of 22 bulbs flowered first, while six bulbs flowered the last, indicating that higher planting densities led earlier flowering. The increasing planting density increased stem length of cut flowers. On the other hand, cut flower quality was improved when the planting density was lower. The incidence of physiological disorders such as blasting was more frequent in planting density of 22, 18, and 14, indicating that higher planting densities caused higher incidences of physiological disorders. All planting densities except 22 bulbs displayed superior results in width, weight, number, and scale weight of the bulbs. Greater planting densities led to inferior bulb enlargement and an increased decomposition rate. pH decreased in all treatments after the bulb enlargement and decreased more as the planting density increased. Contents of P, K, Ca, and Mg increased, while contents of K and Ca decreased, as the planting density increased. The rice hull+coir (1:1, v/v) treatment was better than others, but did not show that much of a difference. Moreover, in bulbs enlargement after cut flower harvest, lily medium and perlite+peat moss treatments showed superior results, and decomposition rate was the greatest in the rice hull+coir (1:1, v/v) treatment. In the HRI's solution strength treatment from the period of flower bud emergence to flower harvest, higher solution strengths gave better cut flower quality in terns of length, weight, and number of flowers. The non-treated control and one third strength of a HRI's solution hastened flowering, indicating that lower strengths led to earlier flowering. According to the results of leaf analysis as affected by solution strength during the flower harvest, absorption rates of N and K were greater when the strength was higher, and Ca and Mg showed the same tendency. On the other hand, the absorption rate of P was the lowest in all treatments.

• Journal of Legislation Research
• /
• no.44
• /
• pp.33-62
• /
• 2013

In this paper, the consolidation of ICT basic legislation and ICT special legislation concerning "Ministry of Science, ICT and Future Planning" and "Korea Communications Commission" which came on the back of governmental reorganization in recent years is discussed in the theoretical and practical aspect. Development of "data communication technology" innovatively changed the method of livelihood of mankind, the emergence of network under global dimension provided financial social benefit and posed a challenge and a threat at the same time. Form digital revolution human kind can expect to receive many important blessings. Nevertheless, there are many advantages of development of technology by digital revolution, cyberspace like online media, internet etc. has realistically many problems that must be solved. To maximum positive aspects like the expansion of freedom of expression and creating plan of economy by the advance of transmission technology is needed. And to minimize side effects of informatization is required more. The First, Special Act on ICT has an adaptation in normative standardization to be fit in media convergence beyond convergence of broadcasting and telecommunications. Henceforth, there must be established a legal basis for the achievement of protection of economic evolution and freedom of speech in digital media, information, communication technology and content development. The second, the government action is to accomplish economic development and freedom of information in structural aspect of norm. Therefore minimizing normative problem by reorganization of organization remains clearly unresolved in politics. The third, Special Act on ICT must be basic law covering info-communications field, pay telecommunication and media contents field. The forth, from a technical point of view, net neutrality, conflict of interest for digital content and so on can be fixed easily. Special Act on ICT must not only pursuit of development of industry. Special Act on ICT and pursuit of enhancing quality of life of people and preparing program to promote democratization. From now on, we need to make powerful nation of information& communications technology and in information human rights protection field got to be one step ahead of others with reference to appear all the various aspects must be brought together in the discussion of legislation process of Special Act on ICT.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.499-508
• /
• 2019

Based on the preliminary surveys for the occurrences of the Muwellut chrome-nickel mineralized zone ($800km^2$) in northwestern Myanmar, Bophivum area was selected as the detailed exploration area after considering data source, geological potential, metallogenic province, necessity of resource development on target mineral, exploration activity, grade, ore deposit type, nearby operating mine, infrastructure and exploration prediction effect. From 2013 to 2016, KIGAM and DGSE carried out geological and geochemical survey with 1:1,000 scale, magnetic survey(areal extent, $1.672km^2$), trench survey(19 trench, total length 392 m), pitting survey(18 pit, total depth 42.6m), exploration drilling(6holes 600m, 2015; 13holes 617.4m). We analyzed Cr and Ni contents of 77 drill cores with specific gravity in Yangon DGSE analytical center. Considering surface geological survey, geochemical exploration, magnetic survey, trench survey and drilling data, we divided Bophivum area into 8 blocks. Resource estimation are divided into measured and indicated resources. Measured resource is about 9,790t and indicated resource is about 12,080t with the average grade of Cr 11.8% and Ni 0.34%. In case of Bophivum area, if we develop by tying up Webula chrome mineralized zone in the south, it will be possible to upgrade the medium-scale mine. Geologically, the ophiolite belt are distributed in the western and eastern part in Myanmar. So, the exploration technology obtained from exploation in Bophivum area will be helpful to discover the hidden chromitite ore body in Myanmar ophiolite belt in the future.

• Korean Security Journal
• /
• no.57
• /
• pp.231-252
• /
• 2018

we have long used foreign words in using the term for guard security despite the obvious existence of own language, the use of foreign terms is strong in foreign feeling in delivery. and also weakens the true meaning of security. there are no terms expressed independently in korean, and we(they) are negligent in finding them and use the terms of foreign language. as a result, we(they) brought about a lack of choice in terms of proper security for our langage. currenty, it is widely used as a security guard even though there is an appropraite word that corresponds to the meaning and meaning of security guards in our words, we still use enlish expressions. there is because the English language is used for convenience regardless of weather the term is appropraite or not, and as the power of the English language is great amid in the trend of globalization. lt is easy to use english without thinking in terms of the use of terminology. ultimitely, however, this is due to the lack of awareness of the korean language. with these reasons, we must find the term of security guards in pure korean language. until now, we have used the terms 'guard, security, protect' as the terms security and protection the term 'Jikim' refers to the korean language as a means to be vigilant and guarded. Jikim refers to the action of maintaining the current safe state. Like school jikimi, children safety jikimi and environment jikimi, Jikim is already being used in many places. Therefore, the term 'guard' should be changed to an appropriate Korean term, and the term 'Jikim' is considered to be the most appropriate term in various sections. so, 'Jikim' will be appropriate in korean, which corresponds to the meaning of security guards. the guardian here is called the Jikimi. Jikimi is a combination of the word Jikim and the korean pronounce 'I' which means people

• Therapeutic Science for Rehabilitation
• /
• v.8 no.4
• /
• pp.53-63
• /
• 2019

Objective : Many communication recovery strategies should be used when communication breakdowns occur for successful communication, however, communication problems increase due to inadequate use of such strategies in older people with dementia. The purpose of this study was to investigate the difference of recovery strategy between dementia and the elderly in conversational discourse. Method : The subjects were eight of Alzheimer's dementia and 10 general elderly. Conversation discourse tasks were conducted face-to-face with the subjects. Communication breakdown and communication recovery strategies were analyzed based on 200 utterances collected in the conversation discourse. Result : First, the AD group had more communication breakdown than the control group, but the recovery rate did not differ between the groups. Second, in the AD group, the nonspecific recovery strategy and the clarification demand strategy were used as the expression strategy. The recovery rate after using expressive strategy was more than 90% in explanation strategy, combined strategy, nonspecific repair strategy, and repetition confirmation strategy. The response strategy used a lot of paraphrase strategy and combined strategies, and the recovery rate after using the response strategy was 100% for the simplification strategy, repeat strategy and gesture strategy. Conclusion : The AD group showed more breakdown of research subjects and breakdown of researchers than control group, and it showed ability to use various expression strategy and response strategy though there was difference in repair rate between communication repair strategy. AD group used nonspecific repair strategy in expression strategy the most and paraphrase strategy in response strategy the most. This shows different characteristic from ordinary elderly people. Therefore, it is necessary to utilize this repair strategy for rehabilitation of AD elderly.

• Korean Security Journal
• /
• no.57
• /
• pp.57-84
• /
• 2018

This study assumes that the perception of the ex-prisoner's against stigma will affect trust in interpersonal relationship. Prior studies have suggested that there is a stigma at the base of the awareness where people avoid and discriminate against ex-prisoner's. This in turn affects ex-prisoner's' recividicism, but there is no study about ex-prisoner's perception of stigma in Korea. Although stigma can be explained in numerous ways, this study is based on the opinion of Phillips(2016), which divides the subscale of stigma as perceived public stigma, perceived personnel stigma, and self stigma. He insisted that ex-prisoner's believe perceived public stigma higher than self-stigma. these results are consistent with this study. However, it is important to note that although ex-prisoner's are more aware of public stigma than self-stigma, they are actually more influenced by self stigma in pereonal relationships. This means that ex-prisoner's are more susceptible to internal psychological awareness than external social recognition. Therefore, the development and intervention of the program to overcome the internal self-stigma of the released prisoner is required. In this study, first, stigma, especially self-stigma turned out to have influence on the interpersonal trust. Therefore, as self-stigma level increased, the interpersonal trust decreased in most cases. Second, it was shown that stigma has the greatest influence on children out of family members, co-workers out of social relationship, self trust out of general relationship in. This confirms that stigma is a factor that greatly influences relationship between important people for ex-prisoner's. Third, since self-sigma negatively reestablish self-identity, make individuals recognize themselves as deviators and show bad lifestyle, which lead them to become habitual offender, ex-prisoner's need to make efforts to overcome self-stigma, and development and intervention of program that can make ex-prisoner's have positive self identity is requested. Fourth, although participants in the study were only male, it seems that there is difference in recognition of stigma by gender, and influence of stigma not only on interpersonal relationships, but also on social reintegration and recidivism imply that these might be good future research topics.

• Korean Security Journal
• /
• no.57
• /
• pp.177-203
• /
• 2018

Police Assigned to Special Guard Act was legislated in 1962 to solve issues regarding the protection of various staple industrial installations, and in 2001, the Security Services Industry Act was revised to establish an effective security system for important national facilities. Thereby the Special Guards System was instituted. The current law has two parts, with the Police Assigned to Special Guard System and Special Guards System, and many scholars have actively discussed the appropriateness of the integration of both systems to solve problems caused by a bimodal system. However, in spite of these discussions taking place in the academic world, the idea of unification lost its power when the guarantee of status regulation was established for the police assigned to special guard. Strictly speaking, police assigned to special guard is a self-guard, and a special guard is a contractual guard. So, both of them have pros and cons. Thus, it would be desirable to give a legal, constitutional guarantee for both systems by strengthening each of them and making up for the weakness of each of them rather than trying to unify police assigned to special guard and special guard. To begin this process, we need to revise unreasonable legal provisions of Security Services Industry Act and Police Assigned to Special Guard Act as below. First, since the actual responsibilities of special guards and police assigned to special guard duty are the same, we need to make the facilities which they use equal. Second, legal provisions need to be revised so that a special guard may perform the duties of a police officer, according to the Act on the Performance of Duties by Police Officers, within the facility that needs to be secured in order to prevent any vacancy in the guarding of an important national facility. Third, disqualifications for the special guards need to be revised to be the same as the disqualifications for the police assigned to special guard duty. Fourth, it is reasonable to unify the training institution for special guards and for police assigned to special guard duty, and it should be the training institution for police. On-the-job education for a security guard needs to be altered to more than 4 hours every month just like the one for police assigned to special guard duty. Fifth, for a special guard, it is not right to limit the conditions in their using weapons to 'use of weapon or explosives' only. If one possesses 'dangerous objects such as weapon, deadly weapon, and so on' and resists, a special guard should be able to use their weapon against that person. Thus, this legal provision should be revised. Sixth, penalty, range of fines, and so on for police assigned to special guard duty need to be revised to be the same as the ones for a special guard. If we revise these legal provisions, we can correct the unreasonable parts of Security Services Industry Act and Police Assigned to Special Guard Act without unifying them. Through these revisions, special guards and police assigned to special guard duty may develop the civilian guard industry wholesomely under the law, and the civilians would have a wider range of options to choose from to receive high quality security service.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.