• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.879-881
• /
• 2013

SCADA 시스템과 같은 제어 시스템의 일반 네트워크와의 연결은 시스템의 제어 및 관리에 효율성을 높여주었으나 일반 네트워크를 사용하기 때문에 고전적인 네트워크의 취약성에 노출되어 취약성을 이용한 사이버 공격이 가능하게 되었다. 따라서 기존 네트워크 환경과는 다른 제어 시스템의 환경과 보안을 고려한 프로토콜이 개발 되었거나 개발 중에 있으며 보안은 이 프로토콜들과 밀접한 관계를 가지게 되었다. 본 논문에서는 제어시스템 프로토콜 중 IEC 61850에서 정의된 GOOSE프로토콜을 대상으로 GOOSE프로토콜의 취약점 분석 및 취약점을 이용한 공격과 이러한 공격을 탐지하기 위한 방법을 제시한다.

• International Journal of Computer Science & Network Security
• /
• v.23 no.3
• /
• pp.130-138
• /
• 2023

The Smart grids are considered as multi-disciplinary power systems where the communication networks are highly employed. This paper presents optimal wide area measurement system (WAMS) configuration in Nordic power system. The transition from SCADA to WAMS becomes now trend in all power systems to ensure higher reliability and data visibility. The optimization applied in this research considered the geographical regions of the Nordic power system. The research considered all the devices of WAMS namely phasor measurement units (PMUs), phasor data concentrators (PDCs) and communication links. The study also presents two scenarios for optimal WAMS namely base case and N-1 contingency as different operating conditions. The result of this research presents technical and financial results for WAMS configuration in a real power system. The optimization results are performed using MATLAB 2017a software application.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.845-848
• /
• 2008

DNP3.0(Distributed Network Protocol 3.0) 프로토콜은 자동화 처리 시스템 사이에서 Master와 Slave의 개념을 적용한 프로토콜로써 현재 한전 SCADA 시스템의 표준 프로토콜로 선정되어 원방 감시 제어용으로 사용되고 있다. 이 DNP3.0 데이터를 RS-232C를 이용해서 전송 할 때, 각각의 DNP3.0 Layer인 DataLink Layer, Transport Layer 그리고 Application Layer의 분석 모듈을 설계하고 구현하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.3
• /
• pp.417-423
• /
• 2024

This study compared and analyzed the importance of command priority between railway traffic controllers through pairwise comparison of AHP analysis. 27 railway traffic controllers working on metropolitan railway control center, urban railway control center, and unmanned driving control center responded. As a result of the analysis, all the railway traffic controllers generally recognized the train driving control and train signal control as the most important priorities. For the controller in the manned driving system, a train driving control was the highest at 0.375. On the other hand, the controller based on unmanned driving recognized train signal control as the highest priority at 0.469. In the result of the AHP analysis considering all the variables, the braking system was the highest priority at 0.19 based on manned train driving. On the other hand, the controller based on unmanned train driving recognized wired and wireless network systems and SCADA as the highest priority at 0.267.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.316-325
• /
• 2018

In this paper, to integrate distributed IT resources and manage human resource efficiently as purpose of cost reduction, infrastructure of wind turbine monitoring system have been designed and developed on the basis of SaaS cloud. This infrastructure hierarchize data according to related task and services. Softwares to monitor conditions via the infrastructure are also developed. Softwares are made up of DB design, field measurement, data transmission and monitoring programs. The infrastructure is able to monitor conditions from SCADA data and additional sensors. Total time delay from field measurement to monitoring is defined by modeling of step-wise time delay in condition monitoring algorithms. Since vibration data are acquired by measurements of high resolution, the delay is unavoidable and it is essential information for application of O&M program. Monitoring target is gearbox in wind turbine of MW-class and it is operating for 10 years, which means that accurate monitoring is essential for its efficient O&M in the future. The infrastructure is in operation to deal with the gearbox conditions with high resolution of 50 TB data capacity, annually.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.2
• /
• pp.174-179
• /
• 2015

Failure Mode and Effects Analysis (FMEA) has been used by Dynamic Positioning (DP) system for risk and reliability analysis. However, there are limitations associated with its implementation in offshore project. 1) since the failure data measured from the SCADA system is missing or unreliable, assessments of Severity, Occurrence, Detection are based on expert's knowledge; 2) it is not easy for experts to precisely evaluate the three risk factors. The risk factors are often expressed in a linguistic way. 3) the relative importance among three risk factors are rarely even considered. To solve these problems and improve the effectiveness of the traditional FMEA, we suggest a Fuzzy-FMEA method for risk and failure mode analysis in Dynamic Positioning System of offshore. The information gathered from DP FMEA report and DP FMEA Proving Trials is expressed using fuzzy linguistic terms. The proposed method is applied to an offshore Dynamic Positioning system, and the results are compared with traditional FMEA.

• The Journal of the Korea Contents Association
• /
• v.22 no.9
• /
• pp.64-75
• /
• 2022

The method of accessing multiple control systems in the OT control network centered on operation technology uses the operator authentication technology of each control system. An example is ID/PW operator authentication technology. In this case, since the OT control network is composed of multiple control systems, operator authentication technology must be applied to each control system. Therefore, the operator must bear the inconvenience of having to manage authentication information for each control system he manages. To solve these problems, SSO technology is used in business-oriented IT networks. However, if this is introduced into the OT control network as it is, the characteristics of the limited size of the OT control network and rapid operator authentication are not reflected, so it cannot be seen as a realistic alternative. In this paper, a public key-based authentication mechanism was newly proposed as an operator authentication technology to solve this problem. In other words, an integrated public key certificate that applies equally to all control systems in the OT control network was issued and used to access all control systems, thereby simplifying the authentication information management and making access to the control system more efficient and secure.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.1
• /
• pp.5-8
• /
• 2017

A series of high gradient superconducting magnetic separator (HGMS) for kaolin has been developed. It is used for processing kaolin to increase the brightness or whiteness whether it is for paper or ceramic applications. The HGMS system mainly consists of a solenoid magnet with a zero boil-off helium cryostat, a double reciprocating canisters system, and a PLC (Process Logic Controller) fully automatic control system based on SCADA (Supervisory Control and Data Acquisition) system. We have successfully developed CGC-5.5/300 and CGC-5.0/500 HGMS systems in the recent years, and now three sets of them are on-site operation in different customers. This paper will present recent progress of the HGMS system, the results of some experiments on processing kaolin clay used HGMS, and the on-site operation.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.258-260
• /
• 2008

전력계통 규모가 대형화, 복잡화됨에 따라 전력계통의 안정적 운용과 양질의 전력공급을 보장하기 위해 EMS(Energy Management System)를 사용, 에너지 시스템 운용에 있어 안정적, 효과적 제어를 기하고 있다. 그러나 전력감시제어설비(SCADA)로부터의 실시간 데이터 누락, 또는 측정데이터의 오류가 발생할 경우 시스템상의 가관측성이 확보되지 않게 되어 상태추정이 불가능 할 수 있다. 이에 상태추정의 가관측성을 제공하기 위해 현재 한국형 EMS (K-EMS : Korea Energy Management System)의 응용프로그램 중 하나인 BLF(Bus Load distribution Factor) 산정 프로그램을 개발중에 있으며, 본 논문에서는 BLF 산정 프로그램을 통한 가관측성 확보방안과 프로그램에 대한 알고리즘에 대해 설명하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.382-384
• /
• 2008

D-TRS is a method of wireless communication. This method will be able to use several frequency for multiple user used chanel together. TETRA of D-TRS technology is not rented network. Using TETRA network has the strong point which cost better than CDMA network of rental network. Master server of SCADA(Supervisory Control And Data Acquisition) system is realtime supervise control and a data acquire the control system or the RTU(Remote Terminal Unit). The present paper is developed and proposal the gateway platform for electronic power backbone network based on D-TRS. This gateway platform is converted DNP3.0 messages with TETRA PDU and converted TETRA PDU with DNP3.0 messages. Master server and FRTU will be able to send and receive DNP3.0 message via TETRA network using this gateway platform.