• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.2
• /
• pp.174-181
• /
• 2012

This research aimed to examine the isoflavonoid contents, antibacterial activities, and physiological activities of Cheonggukjang made from sword bean (CS). The effects of adding sword bean were compared with those of raw materials (RM), steamed materials (SM), and traditional Cheonggukjang (TC). In the case of the antibacterial activity on Gram-positive bacteria, the result of CS in ethanol extract was the highest in Bacillus cereus, and the result of water extract was the highest in Staphylococcus aureus. However, in the case of Gram-negative bacteria, Salmonella Typhimurium was the highest in all the extraction. Antioxidant activity and total flavonoid contents were present in the order of TC

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.1
• /
• pp.1-8
• /
• 2008

A two-wheel balancing vehicle, which helps people moving freely and fast, and is applied from inverted pendulum system, has been widely researched and developed, and some products are came into a market in actuality. Until now, the two-wheel balancing vehicles developed have chosen the general PID control method. In this paper, we propose a new control method to improve a control capacity for a two-wheeled balancing vehicle for human transportation. The proposed method is the fuzzy PD+I control that is one of the improved PID control, and it contains a 2input-1output fuzzy system. This fuzzy system processes signals from proportional and derivative controller, and the fuzzy output signal generates the final output by summing up integral signal. The non-linearity of the fuzzy system makes an optimal output control signal by changing weight of the proportional signal and the derivative signal in process of time. We have simulated the fuzzy PD+I control system and experimented by implementing the two-wheel balancing mobile robot to verify the advantages of the proposed fuzzy PD+I control method in comparison with general PID control. As the results of simulation and experimentation, the proposed fuzzy PD+I control method has better control performance than general PID in this system and improves it.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.3
• /
• pp.44-51
• /
• 2009

It is very important to verify generated setup errors in cancer therapy by using a high energy radiation and to perform the precise radiation therapy. Specially, the verification of treatment position is very crucial in special therapies like fractionated stereotatic radiotherapy (FSRT). The FSRT uses normally high-dose, small field size for treating small intracranial lesions. To estimate the developed FSRT system, the isocenter accuracy of gantry, couch and collimator were performed and a total of inaccuracy was less than ${\pm}1mm$. Precise beam targeting is crucial when using high-dose, small field size FSRT for treating small intracranial lesions. The EPID image of the 3mm lead ball mounted on the isocenter with a 25mm collimator cone was acquired and detected to the extent of one pixel (0.76mm) after comparing the difference between the center of a 25mm collimator cone and a 3 mm ball after processing the EPID image. In this paper, the radiation treatment efficiency can be improved by performing precise radiation therapy with a developed video based EPID and FSRT at near real time

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.100-107
• /
• 2007

AABR(automated auditory brainstem response) test is used for the screening purpose of hearing ability of neonates. In this paper, algorithm using Rolle's theorem is suggested for automatic detection of the ensemble averaged ABR waveform. The ABR waveforms were recorded from 55 normal-hearing ears of neonates at screening levels varying from 30 to 60 dBnHL. Recorded signals were analyzed by expert audiologist and by the proposed algorithm. The results showed that the proposed algorithm correctly identified latencies of the major ABR waves (III, V) with latent difference below 0.2 ms. No significant differences were found between the two methods. We also analyzed the ABR signals using derivative algorithm and compared the results with proposed algorithm. The number of detected candidate waves using the proposed algorithm was 47 % less than that of the existing one. The proposed method had lower relative errors (0.01 % error at 60dBnHL) compared to the existing one. By using proposed algorithm, clinicians can detect and label waves III and V more objectively and quantitatively than the manual detection method.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.5
• /
• pp.21-27
• /
• 2008

Despite recent studies on development of pulse diagnosis systems and needs for commercializing them, the reproducibility is one of the most controversial issues as ever. Because the pulse pressure value, which is one of the important parameters to evaluate reproducibility, is very vulnerable to moving artifacts, the reproducibility can not be obtained easily. In this paper, we suggested a moving artefacts detection system for a pulse diagnosis system so that a pulse diagnosis system can be robust to theses kinds of artefacts by excluding the contaminated parts from the pulse wave signal to be analyzed. This moving artifacts detection system was designed to consist of a three-axis accelerometer, an electromyography amplifier and a two-axis tilt sensor. To assess the suitability of the system, we examined the characteristics of each sensor's output signals with regard to the three specific motions such as extension, flexion and rotation. And, we also examined the each sensor's response to the high-frequency and low-frequency moving artifacts while the pulse wave signal was acquired from a pressure sensor for the pulse diagnosis. From these results, we could find that the response to subject's motions would be reflected in electromyography signal first, in accelerometer signals and in tilt sensor sequently. And, the facts that a stable pulse wave can be acquired in two seconds after high frequency or low frequency motions ended, were also found. Consequently, based on these findings, we set up some rules on the moving artifacts detection and designed an algorithm which is fit for our moving artifacts detection system.

• The Korean Journal of Mycology
• /
• v.28 no.1
• /
• pp.22-25
• /
• 2000

This study was carried out to compare DNA sequence of mating type locus concerning with direct formation of fruiting body in Schizophyllum commune which is growing in North America with that of same species growing in South America. The nucleotide sequence appeared to have about 96% homology to 1-71 $A{\alpha}3$ allele from South America strain, showing a conservative feature. The polypeptide sequence showed about 82% homology when compared partially with mating activity region of 1-71 $A{\alpha}3$ allele. In addition, this polypeptide sequence indicated 74% and 82% identity in homeodomain and acidic-rich regions known as a transcription factor respectively.

• Journal of Life Science
• /
• v.23 no.8
• /
• pp.1032-1040
• /
• 2013

The comparative effects of fibrinolytic, antioxidative activity and electrophoretical protein patterns with Cordyceps militaris powder (CM) and cordycepin-enriched Cordyceps militaris JLM0636 powder (CCM) and fermented cordycepin-enriched Cordyceps militaris JLM0636 powder by several microscopic organisms were investigated. In addition, nutritional materials such as mineral, protein, and fatty acids were also measured. The protein concentration was higher in CCM than that in CM. The protein concentration in fermented CCM was the highest in CCM treated by Aspergillus kawachii among the various samples. When total protein patterns of CM, CCM, and both fermented CCMs were analyzed by native- and SDS-PAGE, there were slightly varietal differences in electrophoretical protein patterns. Major minerals were K, Ca, Mg, and Zn. Major fatty acids were palmitic acid, stearic acid, oleic acid, linoleic acid, and linolenic acid. Fibrinolytic activity was the highest in the fermented CCM by Bs treatment among the various samples. The ${\alpha},{\alpha}^{\prime}$-diphenyl-${\beta}$-picrylhydrazyl (DPPH) radical scavenging activity was slightly stronger in the CCM treated with Aspergillus kawachii among the various samples; however, these samples all exhibited relatively low levels of activity compared with the butylated hydroxytoluene (BHT). These results may provide the basic data necessary to understand the biological activities and chemical characteristics of Cordyceps militaris JLM0636 powder fermented by several microscopic organisms to develop functional foods.

• Journal of Life Science
• /
• v.12 no.2
• /
• pp.173-181
• /
• 2002

This study was conducted to do the comparative analysis of mating type locus controlling the direct formation of fruiting body in Schizophyllum commune which is indigenous to North America with that of other identified mating locus. The 3120 bp Y-region nucleotide of A $\alpha$ 3 mating locus activating a developmental pathway in S. commune was determined, and appeared to have about 96% homology to S. commune 1-71 $A\alpha$3 allele indigenous to South America, showing strongly a conservative feature. This nucleotide analysis also showed above 96% homology highly in the seven presumed exons, and about 97% in the acidic rich region (AR), about 99% in homeodomain (H7), about 97% in the basic rich region (BR), about 95% in the serine rich region (Ser) respectively. In the comparative analysis to the translated polypeptide sequence, S. commune A $\alpha$ 3 mating locus containing Y-region also showed about 97% homology to the region of S. commune indigenous to North America, but the identity ratio to Y1 including Y4, Y5, Y6 different allele types was declined to about 41~49%. In the analysis of functional loci controlling mating activity, it is assumed to have a highly conservative feature showing about 98% homology in homeodomain polypeptide. Especially, it is notable that the homology ratio of above 85% in homeodomain motif between mating type alleles was higher than in the AR, BR, Ser showing about 10~50% homology.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.2
• /
• pp.152-156
• /
• 2012

BACKGROUND: This research has investigated the residue patterns of insecticide flubendiamide on three species of peaches with different surface forms, and the residue amounts of them when mixed with a spreader. METHODS AND RESULTS: Pesticide used for field application on peaches was 20% flubendiamide of suspension concentrate(SC) and was sprayed at a recommended rate. The residue amounts of flubendiamide in peach were analyzed by HPLC equipped with UV detector. After the observation with a microscope, the rank of fuzz amount on peach's surface was Kurakatawase, Wolmi in descending order and Cheonhong did not have any fuzz. The residue amounts of flubendiamide were 0.54 mg/kg for Kurakatawase, 0.43 mg/kg for Wolmi and 0.10 mg/kg for Cheonhong, respectively. When flubendiamide was used with a spreader, polyoxy ethylene methylpoly siloxane, the residue amount for Kurakatawase barely changed at 0.55 mg/kg regardless of mixing with a spreader, and at 0.53 mg/kg for Wolmi. In Cheonhong, the residue amount was 0.48 mg/kg, which increased by 4.8 times due to the use of a spreader. CONCLUSION: This result indicates that the residue amounts of flubendiamde were affected by the surface forms of peaches, and in the presence of a spreader the residue amount did not increase in fuzzy species, but was affected greatly for species without fuzz.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.32-32
• /
• 2012

화석연료의 남용으로 지구 온난화가 심화되어 환경과 생태계변화가 가속화되고 있고, 급속한 산업의 발달과 인류 삶의 질 향상에 따른 에너지 수요가 급증하고 있는 실정에 있으며, 일본 후쿠시마 원전사태로 원자력 에너지의 위험성으로 지구 인류환경은 심각한 국면을 맞이 하고 있어 대체 에너지의 하나로 핵융합 에너지 필요성이 증대되고 있다. 핵융합 에너지 연구 개발은 우리나라에서 KSTAR가 1997년부터 건설하기 시작하여 지난 2007년에 완공되어 지금 운용 중에 있고, 국제적으로 미국, EU, 러시아, 중국, 한국, 일본 인도가 참여하는 ITER 국제 공동프로젝트가 2004년에 건설을 시작하여 프랑스 카다라쉬에 실증 플란트를 건설 중에 있다. 이러한 핵융합 반응을 위해서는 10e-7이상의 높은 진공과 1억$^{\circ}C$ 이상에서 중수소와 삼중수소가 반응하여 발생하는 플라즈마를 제어 할 필요가 있으며, 초고온의 핵융합 플라즈마를 가두고 가동시키기 위해서는 약 12Tesla이상의 고자장 마그넷이 필요하다. 현재 ITER 실증 플란트에 사용되는 고자장 마그넷은 TF (Toroidal Field)코일과 CS (Central Field)코일에 Nb3Sn 초전도선재가 핵심부품으로 사용되고 있으며 ITER프로젝트에서는 약 850톤의 Nb3Sn 초전도선재가 사용될 전망이다. 그 중에서 일본 25%, EU, 러시아와 한국이 각각 20%, 중국7%, 미국8% 할당되어 참여국 대부분은 초전도선재를 전략적으로 공급하고 있다. 초전도 선재의 크롬도금은 1~2 마이크로미터 이하의 균일하고 얇은 도금 두께와 밀착성이 우수한 품질이 요구된다. 일반적으로 크롬도금은 산업현장에서 컨베이어 벨트 방식으로 장식이나, 내식성 및 내마모성의 특성을 필요로 할 때 사용되고 있으나, 선재에 크롬도금을 릴투릴(Reel to Reel) 방식으로 적용되는 경우는 세계적으로 아주 드물다. 핵융합 마그넷의 CICC(Conduct In Cable Conduit)도체를 만들기 위해서는 초전도선재를 이용, 3(Sc 2+OFC 1)$^*3^*5^*5^*6$형태로 연선과 케이블링을 하게 되며, 초전도 선재를 연선하고 케이블링을 할 때 크롬 도금층이 박리될 가능성이 있어 크롬도금 방법과 프로세스를 특별히 고안할 필요가 있다. ITER핵융합로 마그넷의 TF코일은 높이 14m, 폭 9m 최대자장 12Tesla, 최대전류 68kA, CICC도체 직경이 40mm로서 그 초전도 조관/도체 내부에 0.82mm 직경의 Nb3Sn 초전도 선재가 약 1350가닥으로 연선과 케이블링으로 구성되어 있다. ITER 핵융합 마그넷용 초전도 선재의 크롬도금은 마그넷 권선 후 Nb3Sn 초전도물질을 형성하기 위해서 $650^{\circ}C$에서 500시간 열처리를 실시하며 열처리 시 초전도 선재의 소선들 사이에 발생할 수 있는 소착을 방지하고, 초전도 선재에서 발생하는 AC loss를 감소시키며, Quench시 발생되는 열을 쉽게 확산시킴으로써, 초전도 마그넷의 열적 안정성(Thermal Stability) 향상과 필요에 따라서 소선간 통전울 가능하게 한다. 고려제강의 자회사인 케이에이티는 크롬도금 밀착성이 우수하고 도금두께 0.1마이크로 미터 이내 제어가 가능한 얇고 균일한 도금품질을 개발하여 한국형 핵융합 실험로인 KSTAR에 65톤 전량 공급하였고, 크롬 도금된 무산소동 선재 32톤과 초전도 선재 93톤을 전량 ITER 프로젝트에 공급하고 있으며, 2013년도 상반기에는 공급을 마무리할 예정이다.