• 제목/요약/키워드: SC Array

검색결과 37건 처리시간 0.027초

Voltage Equalizing of Solar Modules for Shadowing Compensation

  • Jou, Hurng-Liahng;Wu, Kuen-Der;Wu, Jinn-Chang;Chung, Cheng-Huan;Huang, Ding-Feng
    • Journal of Power Electronics
    • /
    • 제17권2호
    • /
    • pp.514-521
    • /
    • 2017
  • This paper proposes a shadowing compensation method for the solar modules of grid-connected photovoltaic generation systems. The shadowing compensator (SC) implemented by the proposed shadowing compensation method is used only for the solar modules that can be shaded by predictable sources of shading. The proposed SC can simplify both the power circuit and the control circuit as well as improve power efficiency and utilizes a voltage equalizer configured by a modified multi-winding fly-back converter. The proposed SC harvests energy from the entire solar cell array to compensate for the shaded sub-modules of the solar cell array, producing near-identical voltages of all shaded and un-shaded sub-modules in the solar cell array. This setup prevents the formation of multiple peaks in the P-V curve under shaded conditions. Hardware prototypes are developed for the SCs implemented by the conventional and modified multi-winding fly-back converters, and their performance is verified through testing. The experimental results show that both SCs can overcome the multiple peaks in the P-V curve. The proposed SC is superior to the SC implemented by the conventional multi-winding fly-back converter.

SC1 세척공정을 이용한 고품질 Poly(3,4-ethylenedioxythiophene) 전극 패턴 어레이의 개발 (Development of High-Quality Poly(3,4-ethylenedioxythiophene) Electrode Pattern Array Using SC1 Cleaning Process)

  • 최상일;김원대;김성수
    • 통합자연과학논문집
    • /
    • 제4권4호
    • /
    • pp.311-314
    • /
    • 2011
  • Application of self-assembled monolayers (SAMs) to the fabrication of organic thin film transistor has been recently reported very often since it can help to provide ohmic contact between films as well as to form simple and effective electrode pattern. Accordingly, quality of these ultra-thin films is becoming more imperative. In this study, in order to manufacture a high quality SAM pattern, a hydrophobic alkylsilane monolayer and a hydrophilic aminosilane monolayer were selectively coated on $SiO_2$ surface through the consecutive procedures of a micro-contact printing (${\mu}CP$) and dip-coating methods under extremely dry condition. On a SAM pattern cleaned with SC1 solution immediately after ${\mu}CP$, poly(3,4-ethylenedioxythiophene) (PEDOT) source and drain electrode array were very selectively and nicely vapour phase polymerized. On the other side, on a SC1-untreated SAM pattern, PEDOT array was very poorly polymerized. It strongly suggests that the SC1 cleaning process effectively removes unwanted contaminants on SAM pattern, thereby resulting in very selective growth of PEDOT electrode pattern.

입자강화형 금속복합재료의 강도 예측에 관한 3차원 유한요소 모델의 평가 (An Evaluation of Three Dimensional Finite Element Model on the Strength Prediction of Particles Reinforced MMCs)

  • 강충길;오진건
    • 한국정밀공학회지
    • /
    • 제15권6호
    • /
    • pp.124-138
    • /
    • 1998
  • Particles reinforced MMCs have many advantages over monolithic metals including a higher specific modulus, higher specific strength, better properties at elevated temperatures and better wear resistance. SiC$_p$/A16061 composites have good results in its mechanical properties. This work investigates SiC$_p$/A16061 composites in the microscopic view and compares the analytical results with the experimental ones. The discrepancy of the material properties between the reinforced particle, SiC$_p$, and the matrix material, A16061 appears to be so significant. Especially the coefficient of thermal expansion(CTE) of A16061 is 5 times larger than that of SiC$_p$. Thermal residual stress in MMCs is induced at high temperatures. The shape of particle is various but the theoretical model is not able to consider the nonuniform shape. Particle distribution is not homogeneous in experimental specimen. However, it is assumed to be homogeneous in simulation model. The shapes of particles are assumed to be not only perfect global but hexahedral shapes. The types of particle distribution are two - simple cubic array(SC array) and face-centered cubic array(FCC array).

  • PDF

A Matlab/Simulink-Based PV array-Supercapacitor Model Employing SimPowerSystem and Stateflow Tool Box

  • Hong, Won-Pyo
    • 조명전기설비학회논문지
    • /
    • 제28권12호
    • /
    • pp.18-29
    • /
    • 2014
  • This paper proposes the integration of photovoltaic (PV) and energy storage systems for sustained power generation. In this proposed system, whenever the PV system cannot completely meet load demands, the super capacitor provides power to meet the remaining load. A power management strategy is designed for the proposed system to manage power flows between PV array systems and supercapacitors (SC). The main task of this study was to design PV systems with storage strategies including MPPT with direct control and an advanced DC-link controller and to analyze dynamic model proposed for a PV-SC hybrid power generation system. In this paper, the simulation models for the hybrid energy system are developed using Matlab/Simulink, SimPowerSystems and Matlab/Stateflow tool. This is the key innovative contribution of the research paper. The system performances are verified by carrying out simulation studies using practical load demand profile and real weather data.

사이드홀 시스템에서 안테나 배열 설계 및 하이브리드 수신기 (Design of Antenna Array and Hybrid Receiver in Sidehaul System)

  • 문상미;최운;추명훈;김대진;김철성;황인태
    • 전자공학회논문지
    • /
    • 제52권5호
    • /
    • pp.10-22
    • /
    • 2015
  • 이최근, 3GPP (3rd Generation Partnership Project) 에서는 폭발적으로 증가하고 있는 모바일 데이터 트래픽을 수용하기 위하여 사이드홀 (Sidehaul) 시스템을 개발하고 이에 대한 연구가 활발히 진행되고 있다. 사이드홀 시스템은 낮은 PAPR (Peak to Average Power Ratio)을 위해 SC-FDMA (Single Carrier-Frequency Division Multiple Access)를 기반으로 한다. 또한 제한된 공간에서 안테나 배열을 사용함으로써 MIMO (Multiple Input Multiple Output) 전송이 가능하게 한다. 본 논문에서는 사이드홀 시스템에서 ULA (Uniform Linear Array), UCA (Uniform Circular Array) 및 UPA (Uniform Planar Array)에 대한 안테나 배열을 설계하고 성능을 분석한다. 또한, 이웃셀로 부터 간섭의 영향을 줄이기 위하여 새로운 하이브리드 수신기 FSC(Full Suppression Cancellation)를 제안한다. 제안한 수신기는 IRC (Interference Rejection Combining)와 SIC (Successive Interference Cancellation)를 결합하여 간섭을 억제 및 제거 할 수 있다.

입력전압 범위가 향상된 저면적 이중출력 스위치드 커패시터 DC-DC 변환기 (A Small Areal Dual-Output Switched Capacitor DC-DC Converter with a Improved Range of Input Voltage)

  • 황선광;김성용;우기찬;김태우;양병도
    • 한국정보통신학회논문지
    • /
    • 제20권9호
    • /
    • pp.1755-1762
    • /
    • 2016
  • 본 논문에서는 입력전압 범위가 향상된 저면적 이중출력 스위치드 커패시터 DC-DC 변환기를 제안하였다. 기존의 스위치드 커패시터는 면적이 작고 저렴하지만, 효율적인 전압변환을 하는 입력전압의 범위가 좁고 다중출력의 경우 면적이 커지고 전력효율이 낮아진다. 제안된 스위치드 커패시터 DC-DC 변환기는 입력전압에 따라 커패시터 어레이 구조를 변경하여 최적의 효율을 갖는 입력 범위를 증가시켰다. 그리고 두 개의 스위치 어레이를 공유함으로써 스위치와 커패시터 수를 32개에서 25개로 줄였다. 제안된 변환기는 $0.18{\mu}m$ CMOS 공정에서 제작하였다. 시뮬레이션 결과 입력전압 범위는 0.7~1.8V이고, 최대 전력 효율은 90%이며, 칩의 면적은 $0.255mm^2$이다.

FPGA Implementation of SC-FDE Timing Synchronization Algorithm

  • Ji, Suyuan;Chen, Chao;Zhang, Yu
    • Journal of Information Processing Systems
    • /
    • 제15권4호
    • /
    • pp.890-903
    • /
    • 2019
  • The single carrier frequency domain equalization (SC-FDE) technology is an important part of the broadband wireless access communication system, which can effectively combat the frequency selective fading in the wireless channel. In SC-FDE communication system, the accuracy of timing synchronization directly affects the performance of the SC-FDE system. In this paper, on the basis of Schmidl timing synchronization algorithm a timing synchronization algorithm suitable for FPGA (field programmable gate array) implementation is proposed. In the FPGA implementation of the timing synchronization algorithm, the sliding window accumulation, quantization processing and amplitude reduction techniques are adopted to reduce the complexity in the implementation of FPGA. The simulation results show that the algorithm can effectively realize the timing synchronization function under the condition of reducing computational complexity and hardware overhead.

액체 막이 입혀진 구 입자 배열을 지나는 기체 흐름 (Gas Flow through Arrays of Spheres Coated by Liquid Film)

  • 구상균
    • 공업화학
    • /
    • 제20권6호
    • /
    • pp.646-652
    • /
    • 2009
  • 본 연구는 표면에 액체 막이 입혀진 구 입자를 지나는 기체의 흐름이 구 입자에 작용하는 항력을 결정하는 3상계 문제를 다룬다. 기체 흐름의 관성은 무시할 정도로 작으며, 구 입자의 표면에서 액체는 중력에 의해 흐르고 액체 막이 기체 흐름에 영향을 받지 않는 경우를 고려한다. SC (simple cubic), BCC (body centered cubic), FCC (face centered cubic) 각 배열의 구 입자들에 대해 외란 기법(perturbation method)과 멀티폴 전개(multipole expansion) 방법을 이용하여 입자들의 수력학적 상호 작용을 계산하고 궁극적으로 액체 막과 액체의 흐름이 기체 흐름에 미치는 영향을 수치적으로 결정한다. 근사적인 방법으로 액체 막의 효과에 구하고 이를 엄밀한 계산 값들과 비교한 결과, 대체로 일치함을 보인다.

RP-HPLC-DAD를 이용한 발효 삼출건비탕의 생물전환 성분 분석 (Analysis Screening of Bioconversion Products from Fermentation Samchulgeonbi-tang with Microorganisms via RP-HPLC-DAD)

  • 이광진;양혜진;량춘;마진열
    • 생약학회지
    • /
    • 제44권2호
    • /
    • pp.125-130
    • /
    • 2013
  • Samchulgeonbi-tang (SC) is well-known traditional herbal medicine which is composed of fourteen medicine herbs. SC has been used for the treatment of the chronic gastritis, indigestion, gastric ulcers, gastroptosis and diarrhea disease. The variation in the amount of bioactive components of SC and its fermentation SC with ten Lactobacillus strains were investigated via high-performance liquid chromatography coupled with diode array detection (HPLC-DAD). Simultaneous qualitative and quantitative analysis of seven bioactive compounds; paeoniflorin, liquiritin, hesperidin, liquiritigenin, kaempferol, atractylenolide III, magnolol were achieved by comparing their retention times ($t_R$) and UV spectra with those of the standard compounds. In the results, the amount of paeoniflorin and hesperidin were 7.967 mg/g, 7.251 mg/g that were the main compounds in SC. The amounts of liquiritigenin was increased by all ten Lactobacillus strains, except strain 128. Especially, the liquiritigenin amount was highest in SC fermented with strain 145 (0.201 mg/g), which was increased by 158.39% compared to SC (0.081 mg/g). In the fermented SC using strains 344, almost components were increased than non-fermented SC, except paeoniflorin and kaempferol. Thus, these results considered that the strains 145 and 344 are most excellent fermentation strains among the 10 species of fermentation strains.

프로그램 가능한 SC Filter의 설계 (Design of Programmable SC Filter)

  • 이병수;이종악
    • 한국통신학회논문지
    • /
    • 제11권3호
    • /
    • pp.172-178
    • /
    • 1986
  • 스위치드 커패시터 필터(Switched-capacitor filter)의 유리한 점은 IC화 할 때 능동 RC회로의 RC적(RC Product)에 해다아는 것이 커패시턴스의 비로 되어 정확하게 그 값을 유지하는 것이 쉽고 클럭주파수에 의하여 중심주파수를 선형적으로 변화시킬 수 있다는 것이다. 본 논문에서는 프로그램 가능한 2차 SC필터를 구성한 후 디지털 신호에 의하여 중심주파수, 선택도 및 최대이득이 제어가능함을 실험을 통하여 입증하였다. 실험결과 필터의 ${omega}_0$는 모든 수동소자에 대해 저감도를 유지할 수 있었으나 스위치의 기생용량이 커패시터의 비에 미치는 영향은 피할 수 없었다. SC 필터는 클럭주파수, 저항 어레이등에 의하여 전달특성을 가변시킬 수 있으므로 디지탈 신호의 처리나 음성의 분석 및 합성에도 이용될 수 있을 것이다.

  • PDF