DOI QR코드

DOI QR Code

A Matlab/Simulink-Based PV array-Supercapacitor Model Employing SimPowerSystem and Stateflow Tool Box

  • Hong, Won-Pyo (Dept. of Building & Plant Engineering, Hanbat National University)
  • Received : 2014.07.30
  • Accepted : 2014.10.31
  • Published : 2014.12.31

Abstract

This paper proposes the integration of photovoltaic (PV) and energy storage systems for sustained power generation. In this proposed system, whenever the PV system cannot completely meet load demands, the super capacitor provides power to meet the remaining load. A power management strategy is designed for the proposed system to manage power flows between PV array systems and supercapacitors (SC). The main task of this study was to design PV systems with storage strategies including MPPT with direct control and an advanced DC-link controller and to analyze dynamic model proposed for a PV-SC hybrid power generation system. In this paper, the simulation models for the hybrid energy system are developed using Matlab/Simulink, SimPowerSystems and Matlab/Stateflow tool. This is the key innovative contribution of the research paper. The system performances are verified by carrying out simulation studies using practical load demand profile and real weather data.

Keywords

References

  1. Ulleberg O., "Stand-alone power systems for the future: optimal design, operation and control of solar-hydrogen energy systems," PhD dissertation, Norwegian University of Science and Technology, 1998.
  2. Chedid R, Rahman S., "A decision support technique for the design of hybrid solar-wind power systems," IEEE Transactions on Energy Conversion, Vol. 13, No.1, pp.79-83, 1998.
  3. Spyker R.L., Nelms R.M., "Analysis of double-layer capacitors supplying constant power loads," IEEE Transactions on Aerospace and Electronic Systems Vol. 36, No. 4, pp.1439-1443, 2000. https://doi.org/10.1109/7.892696
  4. R. Kotz and M. Carlen, "Principles and applications of electrochemical capacitors," Electrochimica Acta, vol. 45, no. 15-16, pp. 2483-2498, 2000. https://doi.org/10.1016/S0013-4686(00)00354-6
  5. V.A. Shah, et.al., "Improved Method for Characterization of Ultracapacitor by Constant Current Charging", International Journal of Modeling and Optimization", Vol. 2, No. 3, pp.290-294, June, 2012.
  6. Pierre-Olivier Logerais, et al., "Study of Photovoltaic Energy Storage by Supercapacitors through Both Experimental and Modelling Approaches", Journal of Solar Energy Volume 2013, Article ID 659014, pp.9 pages. 2013.
  7. A. Luque, et al., "Handbook of Photovoltaic Science and Engineering", JohnWiley and Sons, Chichester, UK, 2003.
  8. Tao Zhou and Bruno Francois, "Energy Management and Power Control of a Hybrid Active Wind Generator for Distributed Power Generation and Grid Integration", IEEE Transaction on industrial Electronics, Vol. 58, No. 1, pp. 95-104, Jan. 2011. https://doi.org/10.1109/TIE.2010.2046580
  9. Won-Pyo Hong, et al., "Power Control modeling and Simulation of Hybrid Power System for Building Microgrid Connected Application", Journal of KIIEE, Vol.23, No.11, pp.85-93, November 2009. https://doi.org/10.5207/JIEIE.2009.23.11.084
  10. D. Lu, et al., "Application of Petri nets for the energy management of a photovoltaic based power station including storage units," Renewable Energy, vol. 35, No. 6, pp. 1117-1124, 2010. https://doi.org/10.1016/j.renene.2009.12.017
  11. M. Uzunoglu, et al., "Modeling control and simulation of a PV/FC/UC based hybrid power generation system for stand-alone applications," Renewable Energy, vol. 34, No. 3, pp. 509-520, 2009. https://doi.org/10.1016/j.renene.2008.06.009
  12. Tao Zhou, et al., "Energy Management and Power Control of a Hybrid Active Wind Generator for Distributed Power Generation and Grid Integration", IEEE Transactions on Industrial Electronics, Vol. 58, No. 1, 2011.
  13. W.P.Hong, "Power control and modeling of solar-ultra capacitor hybrid energy system for stand-alone applications", ICCAS 2010, Oct.27-30,2010 in Kintex, Gyeonggi-do, Korea.
  14. H. Patel, et al., "MATLAB-based modeling to study the effects of partial shading on PV array characteristics", IEEE Transactions on Energy Conversion 23, pp. 302-310, 2008. https://doi.org/10.1109/TEC.2007.914308
  15. M. Veerachary, et al., "Voltage-based maximum power point tracking control of PV system," IEEE Transactions on Aerospace and Electronic Systems, Vol.38, Issue 1, pp. 262-270, 2002. https://doi.org/10.1109/7.993245
  16. Kashif Ishaque, et al., "Modeling and simulation of photovoltaic (PV) system durin g partial shading based on a two-diode model", Simulation Modelling Practice and Theory 19, pp. 1613-1626, 2011. https://doi.org/10.1016/j.simpat.2011.04.005
  17. Y. Sukamongkol, et al., "A simulation model for predicting the performance of a solar photovoltaic system with alternating current loads," Renewable Energy, Vol.27, Issue 2, pp.237-258, 2002. https://doi.org/10.1016/S0960-1481(02)00002-2
  18. Won-Pyo Hong, et al,. "A Variable Step Size Incremental Conductance MPPT of a Photovoltaic System Using DC-DC Converter with Direct Control Scheme", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers , Vol. 27, No. 9, pp. 74-82, 2013. https://doi.org/10.5207/JIEIE.2013.27.9.074
  19. K. H. Hussein, et al., "Maximum Photovoltaic Power Tracking : an Algorithm for Rapidly Changing atmospheric Conditions," IEE Proceedings-Generation, Transmission and Distribution, Vol.142, pp. 59-64, 1995. https://doi.org/10.1049/ip-gtd:19951577
  20. A. Pandey, et al., "Design issues in implementing MPPT for improved tracking and dynamic performance," in Proc. IEEE IECON 2006, pp.4387-4391, 2006.
  21. I. Houssamo, et al., "Maximum power tracking for photovoltaic power system: development and experimental comparison of two algorithms," Renewable Energy, Vol.35, Issue 10, pp. 2381-2387, 2010. https://doi.org/10.1016/j.renene.2010.04.006
  22. F. Salem, et al., "An enhanced fuzzy-PI controller applied to the MPPT problem," J. Sci. Eng., Vol.8, No.2, pp. 147-153, 2005.
  23. E. Danila, et al., "MODELS AND MODELLING THE SUPERCAPACITORS FOR A DEFINED APPLICATION", Annals of the University Craiova, Electrical Engineering Series, No. 35, pp. 200-205, 2011.
  24. AHMED AL-JANAD, et al., "ANALYSING PERFORMANCE OF SUPER-CAPACITOR AND BATTERY IN LOW VOLTAGE ELECTRICAL DISTRIBUTION SYSTEMS," Journal of Theoretical and Applied Information Technology,. Vol. 61, No.1, pp. 99-106, 10th March 2014.
  25. H. Douglas and P. Pillay, "Sizing ultracapacitors for hybrid electric vehicles", 31st IEEE annual conference of industrial electronics, pp. 37-50, May 2000.
  26. Varsha A. Shah, et al., "Improved Method for Characterization of Ultracapacitor by Constant Current Charging", International Journal of Modeling and Optimization, Vol. 2, No. 3, June 2012.
  27. Data sheet for super capacitor from EPCOS with Part No.: B48621-S0203-Q288.
  28. Patrik Johansson, "Comparison of Simulation Programs for Supercapacitor Modelling : Model Creation and Verification", Master of Science Thesis, Electrical Engineering Department of Energy and Environment Division of Electric Power Engineering , CHALMERS UNIVERSITY OF TECHNOLOGY, Gothenburg, Sweden, 2008.
  29. Y. Cheng, "Assessments of Energy Capacity and Energy Losses of Supercapacitors in Fast Charging-Discharging Cycles", IEEE Trans. on Energy Conversion, vol. 25, No. 1, pp.253-261,2010. https://doi.org/10.1109/TEC.2009.2032619