• Nuclear Engineering and Technology
• /
• v.45 no.4
• /
• pp.553-564
• /
• 2013

This study evaluates the local damage of a turbine in an auxiliary building of a nuclear power plant due to an external impact by using the LS-DYNA finite element program. The wall of the auxiliary building is SC structure and the material of the SC wall plate is high manganese steel, which has superior ductility and energy absorbance compared to the ordinary steel used for other SC wall plates. The effects of the material of the wall, collision speed, and angle on the magnitude of the local damage were evaluated by local collision analysis. The analysis revealed that the SC wall made of manganese steel had significantly less damage than the SC wall made of ordinary steel. In conclusion, an SC wall made of manganese steel can have higher effective resistance than an SC wall made of ordinary steel against the local collision of an airplane engine or against a turbine impact.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.34-41
• /
• 2021

Recently, a lossless non-successive interference cancellation (SIC) non-orthogonal multiple access (NOMA) implementation has been proposed. Such lossless NOMA without SIC is achieved via correlated superposition coding (SC), in comparison with conventional independent SC. However, only high-correlated SC was investigated in the lossless non-SIC NOMA implementation. Thus, this paper investigates low-correlated SC, especially a lossless interval, owing to low-correlation between signals. First, for the low-correlated SC scheme, we derive the closed-form expressions for the two roots with which the lossless interval is defined. Then, simulations demonstrate that the lossless interval of low-correlated SC NOMA is enlarged, with a degraded middle interval, compared to that of high-correlated SC NOMA. Moreover, we also show that such tendency becomes stronger as the value of the correlation coefficient varies. As a result, the proposed low-correlated SC scheme could be considered as a promising correlated SC scheme, with the enlarged lossless interval in NOMA toward the future sixth-generation (6G) ultra-reliable low-latency communications (URLLC).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.611-613
• /
• 2017

This paper proposes a new method to reduce the overhead by pilots for single carrier frequency domain equalization (SC-FDE) transmission. In the conventional SC-FDE transmission structure, the overhead by transmitting pilot are heavy because the pilot are transmitted at every SC-FDE block. The proposed SC-FDE structure has fewer pilots and many SC-FCE blocks are transmitted between pilots. The channel estimation and equalization is performed at the pilot period and the channels between pilots are estimated through linear interpolation. This reduces the pilot overhead by reducing the pilot transmission compared with the conventional structure, and enables reliable channel estimation and equalization.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5A
• /
• pp.277-287
• /
• 2012

The shear wall with openings built with reinforced concrete (RC) have been elaborately studied by many researchers, whereas the steel plate concrete (SC) wall structure has not been investigated as much. The recent SC wall structures developed in Korea have been partly applied to nuclear power plant structures, although its design specification or guideline for the SC wall structure with openings has not been completed yet. This study based on numerical analysis evaluates the effects of opening on the structural resistance of the SC structure in nuclear power plant. As a result from nonlinear analysis, since the strengthening for openings significantly affect the overall strength of SC wall, the openings should be considered to strengthen them around adjacent area. It is also proved that the strengthened openings have the sufficient resistance and ductility regardless their size, shape, location, and quantity.

• Korean Journal of Poultry Science
• /
• v.44 no.3
• /
• pp.161-172
• /
• 2017

This study was conducted to determine the effect of Saccharomyces cerevisiae (SC) as a dietary probiotic and evaluated the most suitable feeding interval for this probiotic on growth performance, carcass yield, and meat quality parameters in broiler chickens. In total, 1,050 one-day-old Cobb 500 chicks were randomly assigned to one of seven dietary treatment groups, in a $2{\times}3$ factorial arrangement with 3 SC dosages (0.6%, 1%, and 1.4%) and two feeding intervals [long term (LT) for 35 days and short term (ST) for 28 days after hatching], with a negative control diet (NC; 0% SC). Triplicate experiments were performed with 50 birds per cage. Broilers fed a diet including SC showed increased (p<0.01) daily gain and feed efficiency compared to the control. Further, broilers fed the 1.4% SC supplemented diet showed a significantly increased (p<0.01) average daily gain (ADG) and feed conversion ratio (FCR) compared to broilers fed the 0.6% and 1% SC incorporated diets. Similarly, broilers fed an LT SC diet showed a greater (p<0.01) increase in ADG and FCR compared to broilers fed an ST SC diet. Moreover, broilers fed an LT SC diet displayed a reduced (p<0.05) meat pH, gizzard weight, and increased (p<0.05) meat water-holding capacity compared to broilers fed an ST SC diet. Broilers fed the 1.4% SC supplemented diet showed increased (p<0.05) thigh muscle weight compared to broilers fed the 0.6% and 1% SC supplemented diets. In conclusion, broilers fed LT SC diets showed improved growth performance and carcass quality parameters compared to broilers fed ST SC diets, and the NC diet, from hatching to day 35.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.1
• /
• pp.23-28
• /
• 2004

In this work, the effect of Sc and Mm(misch metal) on the high temperature behavior of Al-Mg alloys was observed. Hardness was increased due to appearance of fine $Al_3Sc$ precipitates. The elongation of Al-Mg-Sc alloy at high temperature was higher than that of Al-Mg-Sc-Mm alloy because Al-Mg-Sc alloy has finer grain sizes than Al-Mg-Sc-Mm alloy. The strain rate sensitivity factor, "m" of Al-Mg-Sc and Al-Mg-Sc-Mm at $475^{\circ}C$ and $1{\times}10^{-2}s^{-1}$ were 0.33 and 0.46, respectively. The activation energy of Al-Mg-Sc and Al-Mg-Sc-Mm alloy for superplastic deformation was 133KJ/mol and 103KJ/mol respectively. The elongation of Al-Mg-Sc alloy at high temperature was decreased by the addition of Mm, but the strength at high temperatures and low strain rate was improved.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.4
• /
• pp.425-434
• /
• 2007

The SC (steel-concrete) composite column was developed to take advantage of the relative economy of using concrete as opposed to steel in carrying large compressive forces. As the SC composite column is pre-fabricated, its use can minimize laborand can speed up the erection of a steel building. In this study, an experiment was conducted to analyze the influence of several parameters, such as the load ratio, the concrete ratio of an area, and its performance with or without fire protection, on the performance of the SC composite column. This paper proposes that the calculation of the strength reduction ratios of columns be done by increasing the temperature. Theoretical equations were used to evaluate the effectiveness of the fire resistance of the SC composite column, and the results of the test and analysis were compared. The fire resistance of the SC composite column was increased by decreasing its load ratio, but the concrete ratio of an area has minimal influence on the fire resistance of the SC composite column.

• Journal of The Geomorphological Association of Korea
• /
• v.17 no.1
• /
• pp.39-48
• /
• 2010

This is a case study to research the environmental changes that occurred during the Latter Half of the postglacial age around the Basin of Onyang River in Asan, Korea. In line with this purpose, the author performed a pollen analysis and a radiocarbon dating on the deposits of alluvial fan around the upper Geumgok River, a tributary of Onyang River. Sampling point was at the altitude of about 67.5 meters, which belongs to the central zone of the cool temperate forest. The followings are the results of the study. The study area has passed through SC-I (the coniferous forest period in which Pinus was dominant), SC-II (the deciduous broad-leaved forest period in which Quercus and Castanea were dominant) and SC-III (the mixed conifer and deciduous broad-leaved forest period, in which Pinus, Quercus and Ulmus/Zelkova were dominant) respectively since about 3,000 yrB.P. SC-I period and SC-II period are presumed to be between about 3,000 and 2,000 yrB. P., and SC-III period to begin after 2,000 yrB.P. In comparison with the nationwide pollen zone during the postglacial age, SC-I and SC-II periods are contrasted with the R-IIIa zone and also the SC-III zone with the RIIIb zone. In addition, it is assumed that Pinus densiflora forest luxuriated there since 2,000 yrB.P. due to the destruction of forests, and that a lot of Fagopyrum pollen appeared; altogether, it was the so-called human interference period, from which forests began to be markedly destroyed. It is concluded that in those days inhabitants leaded agricultural life.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.919-925
• /
• 2012

We tried to blend PLLA and PDLA at overall compositions to form PLA stereocomplexes (SC). The presence of the SC crystalline phase in the PLLA matrix was verified by differential scanning calorimetry (DSC). As a result, a various PDLA composition of the PLA SC blends can influence PLA SC formation. And the largest amount of PLA SC crystallites was formed when PLLA/PDLA ratio is 50/50. In addition, we have tried to do PLA SC toughening with two impact modifiers in 92/8, 85/15 ratio of PLLA/PDLA to enhance the mechanical properties such as impact strength. Thermal and mechanical properties of PLA SC were investigated by DSC, HDT, Izod impact tester and UTM. PLA SC formation decreased when 10-20 wt% of Strong120 (impact modifier) was added. On the other hand, there is no effect on PLA SC formation when 10-20% of Elvaloy (impact modifier) was added. HDT values dramatically increased over $100^{\circ}C$ with the addition of PDLA. However, HDT decreased as Strong120 and Elvaloy content increased. Finally, we could find well balanced composition of toughened PLA SC with 10wt% of impact modifier in flexural modulus and impact strength.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.108-116
• /
• 2015

This study analytically reviewed the behavior of Steel Plate Concrete(SC) walls subjected to combined loads of axial force, flexural moment, and shear force to investigate the effects of shape and arrangement spacing of studs on the behavior of SC walls. To perform it, 9 cases of finite element analyses considering the different shape and spacing of studs in SC wall were carried out. The results showed that, for SC walls combined steel plate and concrete according to the Design Code, the compressive strength is higher than the tensile strength. Compared results from the finite element analyses of SC walls subjected to combined loads with Design Code showed that all cases were higher than the design strength. For KEPIC SNG, the moment and shear force were not influenced by the axial force of 0.1 to 0.2 times axial strength, however, from the analyses, it was found that the values were decreased as the axial force is increased.