• Steel and Composite Structures
• /
• 제28권1호
• /
• pp.63-71
• /
• 2018

This paper reports an experimental study that was accomplished to assess the seismic behavior of steel tube reinforced concrete bridge columns (SBCs). The motivation of this study was to verify a supposition that the core steel tube may be terminated at a rational position in the column to minimize the material cost while maintaining the seismic behavior of this composite column. Four SBC specimens were tested under combined constant axial load and cyclic reversed lateral loads. The unique variable in the test matrix was the core steel tube embedment length, which ranged from 1/3 to 3/3 of the column effective height. It is observed that SBCs showed two distinctly different failure patterns, namely brittle shear failure and ductile flexural failure. Tests results indicate that the hysteretic responses of SBCs were susceptible to the core steel tube embedment length. With the increase of this structural parameter, the lateral strength of SBC was progressively improved; the deformability and ductility, however, exhibited a tendency of first increase and then decrease. It is also found that in addition to maintained the rate of stiffness degradation and cumulative energy dissipation basically unchanged, both the ductility and deformability of SBC were significantly improved when the core steel tube was terminated at the mid-height of the column, and these were the most unexpected benefits accompanied with material cost reduction.

• 한국방재학회 논문집
• /
• 제7권5호
• /
• pp.73-78
• /
• 2007

전세계적으로 지구온난화와 기상이변으로 인한 인명과 재산의 피해는 해마다 증가하고 있으며, 최근 한반도의 기후와 기온은 지구평균치보다 큰 변화가 일어나고 있다. 지구전체기상모형(Global Climate Model 또는General Circulation Model GEM)보다 고해상도의 모의가 가능한 지역기상모형(Regional Climate Model RCM)은 기후 변동, 변화 및 그 영향과 관련된 여러 문제들을 파악하는데 사용된다. 이러한 기상모형을 위한 기존 입력자료들의 가용성, 정확도, 그리고 일관성의 결여로 인하여 제한되고 있는 모형의 예측능력 향상을 위해 새로운 지표경계조건들(Surface Boundary Condition SBC)의 필요성이 요구되고 있다. 따라서, 정확도 높은 측정자료의 확보와 과학적 근거에 의한 자료선택 및 결측보정이 새로운 지표경계조건 구축에 선결조건이 되어야 한다. 이 연구의 목적은, 기상방재 수립을 위한 아시아 지역기상모형에 필요한 정확도 높은 지표경계조건 자료를 구축하는데 있다. 산정된 지표경계조건들은 30km 크기의 격자망으로 구성된 한반도를 포함한 아시아 지역기상모형의 계산망에 대해 구축되어, 이 지역의 기상 및 수문 예측모의를 위한 다른 분포형모형들의 입력자료로도 사용이 가능하다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제41권3호
• /
• pp.145-148
• /
• 2015

In 1942 Stafne reported 35 asymptomatic, radiolucent cavities that were unilaterally located in the posterior region of the mandible between the mandibular angle and the third molar, and below the mandibular canal. The term Stafne bone cavity (SBC) is now used for such asymptomatic lingual bone depressions of the lower jaw. Since then there have been many reports of SBCs but very fews tudies have used cone-beam computed tomography (CBCT) for their diagnosis. The aim of this paper is to describe the clinical and radiological characteristics of two cases of SBCs and the importance of limited CBCT in confirming the diagnosis.

• 통상정보연구
• /
• 제10권4호
• /
• pp.373-393
• /
• 2008

The object of this thesis is to evaluate performance of Industry Complex of Rural Areas Policy and to suggest solutions to solve problems of the policy and development plans for Industry Complex of Rural Areas in Korea. The Industry Complex of Rural Areas Policy has contributed to increase of income and growth of industries in farming areas. Since business environment has been changing rapidly and competition has been getting fierce, Korean small business in rural are as need to develop new strategies to strengthen their competitiveness. Therefore, this thesis will suggest public programs to support for development of Korean small businesses in rural areas. The suggestions are as below 1) plans to form funds to provide financial aid to small business in rural areas. Specific plans to raise funds for public programs that would be executed by National Industry Complex of Rural Areas Association are included. 2) plans to improve abilities of SBCs to develop technologies 3) plans to establish marketing channels for SBCs in rural areas. 4) plans to create systems to promote restructuring in Industry Complex of Rural Area.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권9호
• /
• pp.4301-4319
• /
• 2017

Adopting mobile chargers (MC) in rechargeable wireless sensors network (R-WSN) to recharge sensors can increase network efficiency (e.g., reduce MC travel distance per tour, reduce MC effort, and prolong WSN lifetime). In this study, we propose a mechanism to split the sensing field into partitions that may be equally spaced but differ in distance to the base station. Moreover, we focus on minimizing the MC effort by providing a new charging mechanism called the sector-based charging schedule (SBCS), which works to dispatch the MC in charging trips to the sector that sends many charging requests and suggesting an efficient sensor-charging algorithm. Specifically, we first utilize the high ability of the BS to divide the R-WSN field into sectors then it select the cluster head for each sector to reduce the intra-node communication. Second, we formulate the charging productivity as NP-hard problem and then conduct experimental simulations to evaluate the performance of the proposed mechanism. An extensive comparison is performed with other mechanisms. Experimental results demonstrate that the SBCS mechanism can prolong the lifetime of R-WSNs by increasing the charging productivity about 20% and reducing the MC effort by about 30%.

• 접착 및 계면
• /
• 제14권2호
• /
• pp.95-100
• /
• 2013

본 연구에서는 메탈로센 폴리올레핀(metallocene polyolefin, me-PO)과 점착부여제(tackifier)를 이용해 열용융형 감압접착제(hot-melt pressure sensitive adhesives, HMPSAs)를 제조하여 물리적 특성을 확인하였고, me-PO가 HMPSAs의 용도에서 스타이렌계 블록 코폴리머(styrenic block copolymers, SBCs)를 대체하여 사용 가능한지에 대해 고찰하였다. 또한, me-PO를 베이스 폴리머로 사용한 HMPSAs의 성능을 최적화하기 위하여 점착부여제가 가져야 할 특성을 알아보고자 하였다. me-PO를 이용하여 Dahlquist Criterion을 만족하는 HMPSAs를 얻기 위해서는 점착부여제와 함께 10% 이상의 프로세스 오일을 혼합 사용하여야 했고, Spray Type의 Applicator에 적합한 수준의 점도를 가지는 HMPSAs를 얻기 위해서는 상대적으로 결정화도가 낮은 제2의 me-PO를 사용해야 했다. 그리고, 분자량이 큰 점착부여제를 사용하면 SBCs계 HMPSAs에 비해 부족한 유지력을 개선시키는데 기여하는 것으로 밝혀졌다.

• 대한수의학회지
• /
• 제45권1호
• /
• pp.1-6
• /
• 2005

In this study we assessed the influences of ultraviolet (UV) light B radiation on epidermal cells by apoptotic sunburn cell (SBC) and the effect of green tea treatment on the inhibition of SBC formation in SKH1-hr mouse. The extent of changes following $200mJ/cm^2$ (0.5 mW/sec) was studied at 0, 3, 6, 12, 18, 24, 30 or 36 hours after exposure. SBCs were recognized by 3 hours after irradiation. There was tendency to increase from 3 hours to 24 hours and decrease from then to 36 hours after irradiation. The mice that received 0, 25, 50, 100, 200, 400 or $800mJ/cm^2$ of UVB were examined 24 hours after irradiation. The SBCs were induced as the radiation dose increases from 0 to $200mJ/cm^2$. A further increase of radiation dose has little further effect. The frequency of UVB ($200mJ/cm^2$)-induced SBC formation was reduced by intraperitoneal injection of green tea extract (p<0.01).

• Toxicological Research
• /
• 제20권4호
• /
• pp.315-320
• /
• 2004

In this study we assessed the influences of ultraviolet (UV) light B radiation on epidermal ATPase-positive dendritic cell (DC) and the effect of green tea treatment in ICR mouse. The extent of changes following 200 mJ/$cm^2$ (0.5 mW/sec) was studied at 0, 6, 12, 18, 24, 30 or 36 hours after exposure. SBCs were decreased by 6 hours after irradiation. There was tendency to decrease from 6 hours to 24 hours and had little further change from then to 36 hours after irradiation. The mice that received 0, 50, 100, 200, 300 or 400 mJ/$cm^2$ of UVB were examined 24 hours after irradiation. The DCs were decreased as the radiation dose increases from 100 to 400 mJ/$cm^2$. The frequency of UVB (200 mJ/$cm^2$)-induced DC decrease was reduced by treatment of green tea (i.p. and topical application, p<0.01).

• 접착 및 계면
• /
• 제15권4호
• /
• pp.145-150
• /
• 2014

Dicyclopentadiene (DCPD)계 석유수지는 많은 분야에서 점착부여수지로 널리 사용되고 있다. 특히, 수소첨가 반응으로 수지 내 이중결합을 수소로 치환시킨 수첨(水添) DCPD계 석유수지는 무색투명의 색상과 빛과 열에 대한 우수한 안정성으로 인해, 고급 핫멜트접착제(hot melt adhesives, 이하 HMAs) 또는 열용융형 감압접착제(hot melt pressure sensitive adhesives, 이하 HMPSAs) 용도에 널리 사용되고 있다. 본 논문에서는 다양한 수첨 DCPD계 석유수지가 SIS와 SBS와 같은 SBCs를 기본 엘라스토머로 사용한 HMPSAs에서 점착부여수지로 사용될 때의 접착성능에 대해 논의하며, 점착부여 수지의 특성과 HMPSAs의 접착성능과의 상관관계를 보여준다. 높은 연화점의 점착부여수지를 사용할 수록 HMPSAs의 $T_g$, 연화점 그리고 crossover temperature가 높아졌다. 높은 방향족 모노머 함량의 점착부여수지를 사용할 경우에는, PSAs의 crossover temperature 및 연화점 감소로 확인할 수 있듯이 PSAs의 내열온도를 저하시키는 경향을 보였다.

• 대한수의학회지
• /
• 제49권1호
• /
• pp.17-22
• /
• 2009

The effect of Bu-Zhong-Yi-Qi-Tang (BZYQT) on the changes of ultraviolet (UV) light B radiation-induced apoptotic sunburn cell (SBC) and epidermal ATPase-positive dendritic cell (DC) in SKH1- hr or ICR mouse were investigated. The mice were treated with UVB (200 mJ/$cm^2$) and were sacrificed 24 h later. BZYQT (50 mg/kg of body weight) or vehicle (saline) was given i.p. at 36 and 12 h before irradiation, and 30 min after irradiation or BZYQT cream (0.2%) or cream base (vehicle) was topically treated at 24 h and 15 min before irradiation, and immediately after irradiation. The skin of SKH1-hr mouse prepared from the back of untreated mice exhibited about 0.3 SBC/cm length of epidermis, and 24 h after UV irradiation, the applied areas show an increased number of SBCs. But the frequency of UVB-induced SBC formation was reduced by intraperitoneal injection of BZYQT extract (p < 0.01). The numbers of DC in normal ICR mouse were 628.00 ${\pm}$ 51.56 or 663.20 ${\pm}$ 62.58 per $mm^2$ of ear epidermis. By 1 day after UVB treatment, the number of ATPase-positive cells/$mm^2$ were decreased by 39.0% or 27.1% in i.p. or topical application group with vehicle. Treatment of BZYQT was associated with increase of 33.9% in i.p. group (p < 0.05) or 2.7% in topical application group in the number of ATPase positive cells compared with the irradiation control group. The results presented herein that BZYQT administration could reduce the extent of skin damages produced by UVB.