• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.186-186
• /
• 2011

[100] 방향으로 4$^{\circ}$ 기울어진 Si(001)-2${\times}$1(vicinal surface)을 초고진공하(UHV)에서 청결하게 하고 열처리하면 rebonded-atom을 가진 DB double step과 이 step에 나란한 아홉 개의 dimer를 가진 평균 폭이 4.0 nm인 single-domain의 (001)-2${\times}$1 테라스의 면으로 재구조된다 [그림 a]. 본 연구에서는 이 표면 위에 Sb을 상온에서 증착하여 덮고 후열처리하면(2 ML, 500$^{\circ}C$ 10 분), Sb-dimer가 Si 표면을 한 층 덮고 (001) 테라스의 Sb-dimer 방향이 DA double-step과 수직을 이루는 1${\times}$2 구조를 이룬다는 사실을 STM으로 확인하였다 [그림 b]. 이러한 Sb-passivation의 효과는 표면 Si-dimer의 부분적으로 채워진 dangling-bond를 Sb-dimer의 완전히 채워진 고립쌍(lone-pair)으로 바꿈으로써 표면 자유 에너지를 줄이고, 나아가 계면 Si 층은 bulk에 유사하게 되는 데에 있다. 이 passivation 된 표면은 Ge/Si 등의 heteroepitaxy에 사용할 수 있고, 특히 single-domain을 유지하며 step 방향에 대해 평행인 dimer-row로 이루어져 있어서 원자나 전자의 이동에 비등방적 효과를 증가시킬 것이 예측된다.

• Fibers and Polymers
• /
• v.1 no.1
• /
• pp.6-11
• /
• 2000

In the polycondensation reaction of polyethyleneterephthalate(PET), $Sb_2$$O_3$, can react effectively as a catalyst, if physically transformed. $Sb_2$$O_3$ powder is transformed into liquid solution by dissolving in ethylene glycol(EG). Homogeneous catalyst is made by mixing this liquid solution with glycols having different solubility. The efficient reaction of PET polymerization is expected by using homogeneous catalyst. PET was synthesized using homogeneous catalysts of 4 wt.% $Sb_2$$O_3$ solution dissolved in glycol[EG, 2,2-bis(4-(2-hydroxyethoxy)phenol)propane(BHPP), neopentyl glycol(NPO), and 1,3-propandiol(PD)]. PET using EG-BHPP($Sb_2$$O_3$) catalysts shows the highest I.V. within a reaction time of 120 min. In the p-d analysis, PET using EG-BHPP($Sb_2$$O_3$) catalysts has the fastest propagation rate and slowest degradation rate. EG-BHPP($Sb_2$$O_3$) catalysts are more efficient than EG($Sb_2$$O_3$) catalysts and $Sb_2$$O_3$ powder catalysts.

• Journal of Korea Foundry Society
• /
• v.7 no.1
• /
• pp.53-59
• /
• 1987

In order to study the infuence of Sb addition on the compacted vermicular graphite cast iron(C/V) and gray cast iron(GC), these specimen which had different Sb content(0-0, 1wt.%) were prepared. these specimen were tested for microstructure and mechanical properties. The result from this study are as follows. For C/V and GC, the microstructure of graphite appeared to be finer with increasing Sb content more than 0.06wt.% Ferrite disappeared from the matrix with addition of Sb more than 0.06wt.% in GC and more than 0.08wt.% in C/V. The size of the eutectic cell in GC was 4.5 to 7 times larger than that in C/V, but the decreasing tendancy of its size was more remarkable in GC than in C/V with increasing Sb content. The abrasion speed corresponding to the maximum amount of abrasion in the nabrasion test was found to be 1.37m/sec. GC sample weared 3.6 to 21 times faster than those of C/V did. the amount of abrasion demeased remarkably with Sb addition, and the abrasion rate was constant with Sb content over 0.04wt.%

• Korean Journal of Materials Research
• /
• v.16 no.6
• /
• pp.351-354
• /
• 2006

[ $Co_{1-x}Fe_xSb_3$ ] skutterudites were synthesized by encapsulated induction melting and their thermoelectric properties were investigated. Single phase ${\delta}-CoSb_3$ was successfully obtained by the subsequent heat treatment at 773 K for 24 hours in vacuum. However, ${\delta}-CoSb_3$ was decomposed to FeSb2 and Sb when $x{\leq}0.3$, which means that the solubility limit of Fe to Co is x<0.3. The positive signs of Seebeck coefficients for all Fe-doped specimens revealed that Fe atoms acted as p-type dopants by substituting Co atoms. Thermoelectric properties were remarkably enhanced by Fe doping and optimum composition was found to be $Co_{0.7}Fe_{0.3}Sb_3$ in this study.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.3 s.45
• /
• pp.147-153
• /
• 2005

Naldrettite, recently discovered in the Mesamax Northwest deposit, Ungava region, northern Quebec, Canada, was reported as a new mineral. In order to confirm whether itis a natural equivalent of synthetic $Pd_2Sb$ phase or not, the pure $Pd_2Sb$ phase has been synthesized and investigated by reflected microscope, electron microprobe analyser, X-ray diffractometer, and micro-indentation hardness tester. Under reflected light synthetic $Pd_2Sb$ Phase is white with a creamy tint in both air and oil and weakly bireflectant. Anisotropism is strong, from brownish gray to greenish blue in air. Micro-indentation hardness test gives VHN100=293(242-322). Composition of the phase is $63.7\~64.3wt.\%\;Pd\;and\; 36.4\~36.8wt.\%$ Sb, and is entirely consistent. The phase, quenched from $500^{\circ}C$, is orthorhobic with space group $Cmc2_1$, and the cell parameters are a=3.366(1), b=17.523(3), c=6.929(2) ${\AA}$. All mineralogical properties of synthetic $Pd_2Sb$ compare very well with those of naldrettite, confirming that naldrettite is the natural analogue of the synthetic $Pd_2Sb$ phase.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.7
• /
• pp.629-637
• /
• 2008

We report several experimental data capable of evaluating the amorphous-to-crystalline (a-c) phase transformation in $(Ag)_x(Ge_2Sb_2Te_5)_{1-x}$ (x = 0, 0.05, 0.1) thin films prepared by a thermal evaporation. The isothermal a-c structural phase changes were evaluated by XRD, and the optical transmittance was measured in the wavelength range of $800{\sim}3000$ nm using a UV-vis-IR spectrophotometer. A speed of the a-c transition was evaluated by detecting the reflection response signals using a nano-pulse scanner with 658 nm laser diode (power P = $1{\sim}17$ mW, pulse duration t = $10{\sim}460$ ns). The surface morphology and roughness of the films were imaged by AFM. It was found that the crystallization speed was so enhanced with an increase of Ag content. While the sheet resistance of c-phase $(Ag)_x(Ge_2Sb_2Te_5)_{1-x}$ was similar to that of c-phase $Ge_2Sb_2Te_5$ (i.e., $R_c{\sim}10{\Omega}/{\square}$), the sheet resistance of a-phase $(Ag)_x(Ge_2Sb_2Te_5)_{1-x}$ was found to be lager than that of a-phase $Ge_2Sb_2Te_5$, $R_a{\sim}5{\times}10^6{\Omega}{/\square}$. For example, the ratios of $R_a/R_c$ for $Ge_2Sb_2Te_5$ and $(Ag)_{0.1}(Ge_2Sb_2Te_5)_{0.9}$ were approximately $5{\times}10^5$ and $5{\times}10^6$, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.3
• /
• pp.259-264
• /
• 2016

The effect of biochar application on soil physics and nitrous oxide ($N_2O$) emission from upland soil for broccoli cultivation was investigated. Sesame straw biochar (SB) was applied at amounts 0 (IF), 50 (SB50), 100 (SB100), 200 (SB200) kg $10a^{-1}$, respectively. SB addition to the upland soil decreased bulk density, and increased porosity and soil respiration. The $N_2O$ emission rates in all treatments were higher in the order of IF $${\geq_-}$$ SB50 > SB100 $${\geq_-}$$ SB200 treatments. Global warming potential in SB200 treatment decreased by 15.1% compared to IF treatment. Therefore, SB application in upland soil can improve soil physics and reduce $N_2O$ emission.

• Korean Journal of Metals and Materials
• /
• v.48 no.4
• /
• pp.353-356
• /
• 2010

InSb thin films with a thickness of approximately 300 nm were prepared using single- and double-source vacuum evaporation methods and their structures and properties were investigated in terms of a heat treatment procedure. The double-source InSb films, prepared by the alternate stacking of In and Sb, were polycrystalline in structure and included small amounts of unreacted In and Sb phases. After annealing at elevated temperatures below the melting point of InSb (525$^{\circ}C$), the films changed into the InSb phase and were found to contain small amounts of unreacted In. The formation capability of the InSb compound was slightly lower for multilayer films than for single-layer films. The electrical and galvanomagnetic properties were found to be strongly related to the microstructures of the films. The maximum value of the Hall mobility and the magnetoresistance were determined to be $4.3{\times}10^3cm^2$/Vs and 70%, respectively, for the single-layer films, while these values for the alternately stacked films were respectively $2.9{\times}10^3cm^2$/Vs and 29% for the $[Sb(2.5)/In(2.5)]_{60}$ films, and $3.1{\times}10^3cm^2$/Vs and 10% for the $[Sb(150)/In(150)]_1$ films.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2010

Interfacial reaction characteristics of a Bi-10Cu-20Sb-0.3Ni Pb-free alloy on Cu pad was investigated by reflow soldering at $430^{\circ}C$. The thickness of interfacial reaction layers with respect to the soldering time was also measured. After the reflow soldering, it was observed that a $(Cu,Ni)_2Sb$, a $Cu_4Sb$ intermetallic layer, and a haze layer, which is consisted of Bi and $Cu_4Sb$ phases, were successively formed at the Bi-10Cu-20Sb-0.3Ni/Cu interface. The total thickness of the reaction layers was found to be linearly increased with increasing of the reflow soldering time up to 120 s. As the added Ni element did not participate in the formation of the thickest $Cu_4Sb$ interfacial layer, suppression of the interfacial growth was not observed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.21-22
• /
• 2008

In the paper, we report several experimental data capable of evaluating the phase transformation characteristics of $Ag_x(Ge_2Sb_2Te_5)_{1-x}$ (x =0, 0.05, 0.1) thin films. The $Ag_x(Ge_2Sb_2Te_5)_{1-x}$ phase change thin films have been prepared by thermal evaporation. The crystallization characteristics of amorphous$Ag_x(Ge_2Sb_2Te_5)_{1-x}$ thin films were investigated by using nano-pulse scanner with 658 nm laser diode (power; 1~17 mW, pulse duration; 10~460 ns) and XRD measurement. It was found that the more Ag is doped, the more crystallization speed was 50 improved. In comparision with $Ge_2Sb_2Te_5$ thin film, the sheet resistance$(R_{amor})$ of the amorphous $Ag_x(Ge_2Sb_2Te_5)_{1-x}$ thin films were found to be lager than that of $Ge_2Sb_2Te_5$ film($R_{amor}$ $\sim10^7\Omega/\square$ and $R_{cryst}$ 10 $\Omega/\square$). That is, the ratio of $R_{amor}/R_{cryst}$ was evaluates to be $\sim10^6$ This is very helpful to writing current reduction of phase-change random acess memory.