• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.4
• /
• pp.64-71
• /
• 2008

SAW (Surface Acoustic Waves) ID (identification) tags have been designed and implemented for RFID (Radio frequency IDentification) systems. With SAW ID tag of pulse position encoding method, the data capacity increased 3 times compared with SAW ID tag of amplitude on/off method. Two different kinds of SAW ID tag receiver systems, heterodyne and homodyne receiver systems, were made. The direct conversion receiver showed better isolation property, 10 dB improvement than the heterodyne receiver to increase wireless interrogation distance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.447-450
• /
• 2010

SAW Device 라는 Passive 소자는 ID Tag나 소형센서들을 대체할 수 있는 MEMS 기술의 초소형 Device 다. 이 SAW Device를 이용하면 독립된 공간이나 전원이 필요한 센서 제어 등을 대신할 수 있을 것이다. 이렇게 활용범위가 확대됨에 따라 다양한 SAW Device를 사용하기 위한 플랫폼이 요구된다. 하지만 현재 SAW Sensor는 많은 발전을 해왔지만 SAW Sensor를 활용할 수 있는 플랫폼의 발전은 미흡하기 때문에 본 논문에서는 이러한 SAW Device를 측정할 수 있는 SAW Reader를 FPGA를 이용하여 좀 더 간단하고 효율적인 Reader platform을 구현해 보고자 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.766-771
• /
• 2008

As the practical range of SAW Device extended into various fields including physical sensor, chemical sensor and ID Tag, the platform for various SAW Devices is required more than ever. While SAW ID or Sensors advanced remarkably, the development of platform which applies to SAW Sensor left much to be desired. Therefore this paper represents the SAW platform in order to use SAW ID such as ID Tag or Sensors more conveniently. The SAW platform consists of a RF module which can recognize SAW ID and a main module which has a hish performance processor in order to process the response signal of SAW ID. The main module which has a high performance processor is designed by GUI environmental type to ensure that users are able to use the platform more easily. In this paper, the SAW platform, which is based on ARM9 core processor, used Windows Embedded CE 6.0 OS which brings friendly interface to users. Also the developers can make less effort to design various applications with sensors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2805-2810
• /
• 2010

The Passive Device called SAW Device of the ID Tag or a small sensor that can replace all of MEMS technology Micro Device. When using SAW Device will be able to replace that sensor control the power needed or separate space. Enlarge the scope of this advantage to use as a platform for various SAW Device is required. However, the current SAW Sensor development has many, but SAW Sensor that can leverage the platform's development is sketchy. Therefore, this paper implements SAW Reader can be measured in SAW Device Using an FPGA more simple and efficient Reader platform.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.183-188
• /
• 2017

This paper is for the a study on home healthcare system for a patient using SAW Tag. This system is useful when there's a patient in home. Many patients are wounded in restroom. But restroom is very private place and nobody want to be disturbed here. The place where the patient is most injured in the house is the toilet, and it is the point where the privacy of the individual should be kept and the patient's condition should be checked and cope with in case of emergency. And using saw tag, we can calculate position and ID through reflected rf signal. Therefore we propose a general home healthcare system. The management system utilized a seat bed system to monitor at-home patients. The system mounts a bio-signal measuring unit on a toilet seat, measures a bio-signal from the bio-signal measuring unit, and the measured bio-signal is transmitted to the main server through the user's smart phone. With proposed system, we can expand operation area to silver town where many patients are cared. In this paper we developed sensor system and saw tag positioning system and showed the result.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1159-1166
• /
• 2006

In this paper, we have designed a RFID reader receiver system for improving the performance of the passive Tag based 9$'908.5{\sim}914MHz'$ RFID reader, and analyzed the system performance according to the frequency, the reader, and tag properties. The commercial receive system causes a loss in sensitivity because of 24 capacitors and 6 inductors. So we have designed an improved system using a circulator, LNA and a SAW filter. The experimental results show that the use of a circulator to separate the Tx/Rx paths eliminates interference, the LNA improves the sensitivity of the Rx module and SAW filter eliminates the noise and spurious components in the received signal.

• Journal of electromagnetic engineering and science
• /
• v.7 no.1
• /
• pp.12-16
• /
• 2007

A UHF band wireless identification system based on passive surface acoustic wave(SAW) devices is presented in this paper. SAW ID tags were fabricated on Y-Z $LiNbO_3$ piezoelectric substrate with a good electro-mechanical coupling property. To reduce degradation of the antenna performance associated with the piezoelectric materials, an efficient design of the SAW RFID antenna is introduced. By measuring the parameters of the SAW ID tag, the performance of the antenna was tested by experimentation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1430-1435
• /
• 2007

We developed a 440MHz surface acoustic wave (SAW) microsensor integrated with pressure-temperature sensors and ID tag. Two piezoelectric substrates were bonded, in which ${\sim}150\;{\mu}m$ cavity was structured. Four sides were completely sealed by JSR photoresist (PR). Pressure sensor was placed on the top substrate, whereas ill tag and temperature sensor were placed on the bottom substrate. Using network analyzer, the developed microsensor was wirelessly tested. Sharp reflection peaks with high S/N ratio, small signal attenuation, and small spurious peaks were observed. All the reflection peaks were well matched with the coupling of mode (COM) simulation results. With a 10mW RF power from the network analyzer, a ${\sim}1$ meter readout distance was observed. Eight sharp ON reflection peaks were observed for ID tag. Temperature sensor was characterized from $20^{\circ}C$ to $200^{\circ}C$. A large phase shift per unit temperature change was observed. The evaluated sensitivity was ${\sim}10^{\circ}/^{\circ}C$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.343-345
• /
• 2015

Currently, SAW Device has been used as a frequency filter using the property of passing only a desired frequency with a narrow bandwidth. However, the areas of activity in various fields since the permanent advantages can be widened by using a non-powered. These sensor tags using SAW Device has been done, but a lot of research, the development of the state still insufficient for Reader Platform. How to read the value of the ID Tag Using SAW Device has a time domain sampling (TDS) method and a frequency domain sampling (FDS) method. The purpose of the paper, we use the FDS method that requires high-speed processing with a relatively slow sampling rate does not require high-speed sampling. Reader Platform was the way to detect ID through PC as FDS way, but It is based on the Cortex-A9 processor and it works a low price, compact and real-time Reader Platform.

• 한국IT서비스학회:학술대회논문집
• /
• 2008.11a
• /
• pp.258-261
• /
• 2008

칩의 초소형화, 태그의 초저가화를 위한 Chipless RFID 기술은 핵심쟁점인 1센트 이하의 상용화 실현까지는 아직 시간과 투자가 더 필요하다. 중소태그업체에서 Chipless 기술의 일종인 표면탄성파(SAW: Surface Acoustic Wave)를 이용하는 RFID 태그의 연구개발과 전략상품화가 시급하고 관련 상세정보의 획득과 전략수립이 필수적인 상황이다. 이에 특정 중소기업의 SAW RFID태그 제품개발 및 시장진입전략, 태그기술 발전을 위해 개발 및 시장정보, 특허정보를 분석 연구한 사례를 제시한다.