• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권2호
• /
• pp.83-90
• /
• 2005

In this paper, we proposed the newly design method for extracting of the saw resonator characteristic. For the parameters of the proposed equivalent model, we adjusted and optimized the variables of several functions. As verification of proposed method, we firstly designed and fabricated cellular saw resonator by using the proposed model resonator. As the simulated and measured results of the proposed design method are almost equaled, we confirmed the usefulness of this method. we knew the usefulness of this method. Finally we designed the 800MHz cellular Tx/Rx band pass filter by using this designed resonator.

• 한국전자파학회논문지
• /
• 제25권12호
• /
• pp.1219-1227
• /
• 2014

펄스 레이저 증착(Pulsed laser Deposition: PLD) 및 RF 스퍼터링 증착(Sputtering Deposition)의 단계적 적용을 통해, 표면탄성파 대역 통과 필터(Surface Acoustic Wave Bandpass Filter: SAW-BPF)용 ZnO 박막을 성장시켰다. PLD 방법으로 성장된 ZnO 박막위에 RF sputtering 방법을 사용하여 ZnO 박막을 재증착시켰으며, 성장된 ZnO 박막의 물성을 분석하기 위하여 XRD, SEM 및 AFM 분석장비를 사용하였다. 두 가지 증착 방법이 단계적으로 적용되어 성장된 ZnO 박막의 경우, 결정성과 배향성이 우수하게 유지되면서 표면거칠기가 향상되었다. 분석 결과, ${\omega}$-scan의 반치폭과 표면거칠기의 RMS 값은 각각 $0.79^{\circ}$와 1.108 nm였다. 그리고 성장된 양질의 ZnO 박막을 사용하여 SAW-BPF를 제작하여 측정한 결과는 응답 특성의 중심주파수가 260.8 MHz, 대역폭은 2.98 MHz, 그리고 삽입손실은 36.5 dB이었다.

• 한국정보통신학회논문지
• /
• 제26권7호
• /
• pp.1032-1039
• /
• 2022

이동통신 중계기에 사용하는 SAW(Surface Acoustic Wave) 방식의 대역통과필터를 대체할 수 있는 5G 이동통신 중계기용 군 지연 특성이 개선된 크로스 커플링 등화기 구조를 결합한 캐비티 대역통과필터를 설계하고 이를 구현하였다. 3D EM 시뮬레이션 툴 (HFSS)을 이용하여 공진 주파수, 공진기 간 결합 계수와 공진기 사이 외부 품질 계수를 계산하였고, 이를 바탕으로 메탈 캐비티 구조로 주파수대역 3500MHz~3600MHz, 대역폭 97.85MHz로 대역 양쪽 가장자리 주파수(edge)단에서 20dB 이상의 감쇄 특성을 가지도록 12차 대역 통과 필터를 제작 하였다. 설계 제작한 대역통과필터는 5G 이동통신 표준에 요구하는 군 지연 시간 조건과 인-밴드, 아웃-밴드 주파수 응답을 만족하였다.

• 한국결정성장학회지
• /
• 제4권2호
• /
• pp.134-138
• /
• 1994

표면탄성파 소자응요을 위하여 완전용융조성, 48.65 mole % $Li_2O에서 LiTaO_3(LT)$ 단결정(Y, X-axis)을 육성하였다. 육성된 $LiTaO_3(LT)$ 단결정의 SAW 소자성능을 확인하기 위하여 photolithography를 거쳐 기본적인 SAW filter를 제작하였다. Yamaju LT Y-cut 단결정 기판과 본 연구에서 제작된 RIST LT Y-cut 단결정 기판에서의 SAW특성결과를 비교하여 성능을 결정하였다. Yamaju LT 기판에서보다 본 연구에서 육성된 LT 단결정 기판에서 우수한 SAW 성능을 보였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.77-79
• /
• 2003

The stability of flows induced by a surface acoustic wave (SAW) propagating along the deformable walls in a confined parallel-plane microchannel or slab in the laminar flow regime is investigated. The governing equation which was derived by considering the nonlinear coupling between the deformable or waving interface and viscous fluids is linearized and then the problem is solved by a verified code based on the spectral method together with the associated interface and boundary conditions. The value of the critical Reynolds number was found to be near 1439 which is much smaller than the rigid-wall case: 5772 for conventional pressure-driven flows.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1515_1516
• /
• 2009

A 440MHz wireless and passive surface acoustic wave (SAW) based micro-sensor was developed for simultaneous measurement of temperature and humidity. The developed sensor is composed of a SAW reflective delay lines structured by an IDT (Inter-Digital Transducer), four reflectors and humidity sensitive film (polyimide). Polyimide was dry-ecthed by RIE (Reactive Ion Etching) to obtain high roughness, which gives the large reaction area resulting in high sensitivity. In wireless testing using a network analyzer, sharp reflection peaks with high S/N ratio, small signal attenuation, and few spurious peaks were observed in the time domain. High sensitivity towards the temperature and humidiy were also observed in the large concentration range. The obtained sensitivity was $16.8^{\circ}/^{\circ}C$ for temperature sensor and $15.8^{\circ}$/%RH for humidity sensor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.187-189
• /
• 1995

A Surface Acoustic Wave Gas sensor for NO, CO, H$_2$gas detection was designed fabricated, and tested. A delay line device was designed to composite a single mode SAW oscillator which enables to measure a SAW velocity. To reduce the effect of temperature and humidity, dual delay line oscillator circuit was used. And final output was measured by digital frequency counter. NO, CO, H$_2$gas were detected by WO$_3$thin film deposited on the path of the Delay Line.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.367-370
• /
• 1998

A hybrid-integrated SAW(surface acoustic wave) douplexer including transmitter(Tx) filter, receiver(Rx) filter an dantenna terminal has been studied. The prototype duplxer was designed for CDMA system application in the 800 MHz-band. Ladder type SAW filters consisting of one port SAW resonators wer integrated on epoxy substrate to demonstrate the feasiblity of antenna duplexer. In order to perform the duplexing function, a strip line for impedance transformaton with length of .gamma./4 was inserted at rx path. The fabricted duplexer has an insertion loss of 3.0 dB at Tx path and 3.7 dB at Rx path. The attenuation has more than 40dB.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1390-1392
• /
• 2001

ZnO-based SAW(surface acoustic wave) filters are fabricated with the configuration of IDT/ZnO/$SiO_2$/Si(100) using various IDT materials such as Al, Cu/Ti, and Cu/Al. Their frequency response characteristics are measured and compared. The thickness of Al IDT is varied to examine the mass loading effect. In addition, effects of thermal treatment and electrical stress on the frequency responses of the fabricated SAW filters are investigated.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.241-244
• /
• 2001

The design and fabrication of the surface acoustic wave(SAW) bandpass filters using slanted finger interdigital electrode transducers(IDTs) is investigated. The slanted finger IDTs are used to design SAW filters with good shape factor, a flat passband, and good out-of-band rejection characteristic. The slanted finger IDTS filter was simulated of three kind of IDTs structure. uniform-uniform IDT, uniform-withdrawal weighting IDTS, withdrawal weighting-withdrawal weighting IDTS. Uniform-withdrawal weighting IDTs structure SAW filters was designed and fabricated on 112$^{\circ}$ LiTaO$_3$, 128$^{\circ}$LiNbO$_3$ substrates. Designed SAW filter has about a 30% fractional bandwidth and a 70MHz center frequency.