• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.72-75
• /
• 2008

Image segmentation techniques becoming increasingly important in the field of remote sensing image analysis in areas such as object oriented image classification. This paper presents a new method for image segmentation in High Resolution Remote Sensing Image based on Seeded Region Growing (SRG) and Edge Information. Firstly, multi-spectral edge detection was done using an entropy operator in pan-sharpened QuickBird imagery. Then, the initial seeds were automatically selected from the obtained edge map. After automatic selection of significant seeds, an initial segmentation was achieved by applying SRG. Finally the region merging process, using region adjacency graph (RAG), was carried out to get the final segmentation result. Experimental results demonstrated that the proposed method has good potential for application in the segmentation of high resolution satellite images.

• 한국측량학회지
• /
• 제39권6호
• /
• pp.563-569
• /
• 2021

KOMPSAT-3, 3A호의 운용 및 다양한 특성을 가지는 차세대중형위성의 발사에 따라서, 고해상도 위성영상의 활용이 지속적으로 증대되고 있다. 특히, ARD (Analysis Ready Data) 형태로의 위성영상 제공을 위하여 기하보정 및 방사보정 등의 다양한 전처리에 대한 연구가 이루어지고 있다. 위성영상의 전처리를 위해서는 촬영 영상에 관한 보조정보가 필요하며, 태양 천정각, 태양 방위각, 촬영각 등이 대표적인 자료이다. 그러나, 대부분의 고해상도 위성영상은 영상 전체에 대한 태양 천정각 및 촬영각을 단일 변수로 제공하고 있다. 본 연구에서는 RFM (Rational Function Model) 및 영상의 보조정보들을 이용하여 영상의 각 화소에 대응되는 태양 천정각 및 촬영각을 산출해보고, 이에 따른 품질을 평가해보고자 하였다. 특히, 화소 기반의 태양 천정각 및 촬영각의 활용을 위하여, 대기상부 반사율(top of atmospheric reflectance)을 산출함에 있어서, 화소 기반의 보조 자료를 적용하고, 단일 상수 기반의 대기상부 반사율과의 비교평가를 수행하였다. 실험 결과, 화소 기반의 태양 천정각 및 촬영각 정보는 보조정보와 유사한 경향을 보였으며, 이를 이용하여 계산된 대기상부 반사율은 왜곡이 감소되었음을 확인하였다.

• Journal of Astronomy and Space Sciences
• /
• 제26권4호
• /
• pp.667-676
• /
• 2009

탑재체 (Payload)는 수동형과 능동형으로 분류되며 , 다양한 형태의 레이더 영상(Radar Image)을 획득하기 위한 위성은 일반적으로 능동형 탑재체인 SAR(Synthetic Aperture Radar)를 이용한다. SAR 위성은 탑재체에서 송신한 전파가 반사되는 것을 획득하여 영상을 형성한다. 때문에 위성이 반사신호를 설계한대로 획득하여 영상을 구성하기 위해서는 궤도에서 실제로 획득한 지상 영상을 기반으로 검보정을 수행하여야 한다. 이에 필요한 것이 지상 목표물인 각면판 반사기(CR; Corner Reflector)이다. 반사기(Reflector)는 다양한 형태가 있으며, SAR를 탑재한 위성의 특성 및 운영목적에 적절하게 설계되어 활용된다. 여기서는 최적의 반사기와 효율적인 반사기들의 특성을 확인하고 그에 대한 고찰을 수행하였다. 또한 그 결과를 바탕으로 삼면판 반사기(Trihedral Corner Reflector)를 설계하고 관련 성능을 확인하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.249-255
• /
• 1999

Water pollution is becoming a serious problem in the populous cities and coastal areas near industrial complex. Sometimes, phytoplankton is considered as the most important element in the coastal environment. Phytoplankton is easily estimated by measuring chlorophyll content in the laboratory. In this study, to build up estimating algorithm of the chlorophyll amount related to the monitoring of coastal environments in Kwangyang bay, the correlationship the respective in situ observed data with Landsat TM and SeaWiFS satellite Image was analyzed. It showed that Landsat TM band 3 image has the highest correlationship with observed data, and based upon this result the monitoring algorithm of chlorophyll in coastal area was extracted. This algorithm will be an important for extracting and controlling environment elements in coastal areas in the future. And it has a significant meaning that it has established a spatial data construction in which satellite image alone could monitor the coastal environment.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.358-360
• /
• 2008

Recently there are many pilot studies for advanced application of first Korea national high resolution satellite image, which is called as KOMPSAT-MSC (Korean Multi-purpose Satellite-Multi-Spectral Camera), in Korea. In this study the forest type classification methodology is developed and its distribution map was constructed by applying high resolution satellite image, KOMPSAT-MSC, based on Tasseled Cap Transformation, especially through comparing the result of detailed filed surveying such as forest type, tree species, tree diameter, tree age and tree crown density in pilot study area.

• 한국조경학회지
• /
• 제27권4호
• /
• pp.131-136
• /
• 1999

Aerial videography techniques have been used to inventory conditions associated with grassland, forests, and agricultural crop production. Most recently, aerial videography has been used to verity satellite image classifications as part of the natural ecosystem survey. The objectives of this study were: (1) to use aerial video images of the study area, one part of Taean Seashore National Park, for the accuracy assessment, and (2) to determine the suitability of aerial videography as an accuracy assessment, of the land cover classification with Landsat-TM data. Video images were collected twice, summer and winter seasons, and divided into two kinds of images, wide angle and narrow angle images. Accuracy assessment methods include the calculation of the error matrix, the overall accuracy and kappa coefficient of agreement. This study indicates that aerial videography is an effective tool for accuracy assessment of the satellite image classifications of which features are relatively large and continuous. And it would be possible to overcome the limits of the present natural ecosystem survey method.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.295-301
• /
• 2004

Satellite captures images periodically and economically over the area wider than aerial photographs, and reconnaissance to unapproachable area. For these advantages, mapping using high resolution satellite image has high potentials of marketability and development. Therefore, utilization of satellite image in mapping and GIS is expected to be growing and research on describable feature, positional accuracy and, possible mapping scale is urgently needed. This research presented that Quick Bird orthoimage could be used to update digital map on a scale of 1:5,000. Quick Bird image was corrected geometrically based on ground control points. DEM was generated using height data of digital topographic map. The orthoimge was produced by digital differential rectification based on DEM which was generated using height data of digital topographic map(scale 1;5,000 and 1;1,000). When the digital topographic map was overlaid with the orthoimage, it was very easy to find changed region or new features builded after the map compiled.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2209-2211
• /
• 1998

This paper presents the matching algorithm with the satellite images using the image warping method. Two stereo images, which are used for the DEM(Digital Elevation Model) extraction, are generally distorted because the images are acquired at different locations and angles. Therefore, the matching Process can't be executed with the original images. To solve this problem, a dynamic triangular image warping method is proposed. At first, the initial matching is executed with seed point, and then, using the matched points from the initial matching, the distorted images is compensated. We experimented this algorithm with the parts of the $6000{\times}6000$ SPOT satellite images. The experiment results show this algorithm is superior to other warping algorithm.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.549-551
• /
• 2003

Satellite images are utilized for various purposes and many people are concerned about them. But it is necessary to process geometric correction for using of satellite images. However, common user regards geometric correction, which is basic preprocessing for satellite image, as laborious job. Therefore we should provide an automatic geometric correction method for Landsat image using GCP chip database. The GCP chip database is the collection of pieces of images with geoinformation and is provided by XML web service. More specifically, XML web service enables common users to easily use our GCP chip database for their own geometric correcting applications.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.238-242
• /
• 2007

Today's commercial high resolution satellite imagery such as that provided by IKONOS and QuickBird, offers the potential to extract useful spatial information for geographical database construction and GIS applications. Digital maps supply the most generally used GIS data probiding topography, road, and building information. Currently, the building information provided by digital maps is incompletely constructed for GIS applications due to planar position error and warped shape. We focus on extracting of the accurate building information including position, shape, and height to update the building information of the digital maps and GIS database. In this paper, we propose a new method of 3D building information extraction with a single high resolution satellite image and digital map. Co-registration between the QuickBird image and the 1:1,000 digital maps was carried out automatically using the RPC adjustment model and the building layer of the digital map was projected onto the image. The building roof boundaries were detected using the building layer from the digital map based on the satellite azimuth. The building shape could be modified using a snake algorithm. Then we measured the building height and traced the building bottom automatically using triangular vector structure (TVS) hypothesis. In order to evaluate the proposed method, we estimated accuracy of the extracted building information using LiDAR DSM.