• English Language & Literature Teaching
• /
• v.10 no.2
• /
• pp.113-132
• /
• 2004

This study aims to suggest desirable directions through analyzing English test items of college entrance examinations(CEE) in Korea, China, and Japan. To achieve this, English test items of Scholastic Ability Test(SAT) in Korea were compared with those of CEE in China and Japan, and test items of TOEFL and IELTS. It was found that there were not many items for testing productive skills relatively to the tests of other countries including TOEFL and IELTS. Especially, there were integrated items for writing test in China. In case of speaking test, all the other country adopted direct ways like interview and oral test, not indirect test as in the SAT in Korea. It is suggested that there need to be included test items comprising long passages in order to measure extensive reading ability. It can be suggested that doze test be adopted for testing integrated proficiency of English.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2001.10a
• /
• pp.242-245
• /
• 2001

This study is aimed to design a priority setting algorithm necessary for evaluating and selecting interdependent R&D planning system alternatives. In case that the relationship of technology alternatives is interdependent, a relative importance as occurrence or nonoccurrence of the technology alternatives viewed from the future time varies. So, we are subject to design the evaluation process considering a cross- impact of future technology alternatives. Thus, we apply the cross impact analysis (CIA) model to consider the cross-impact among interdependent system alternatives. Also, the analytic hierarchy process(AHP) model is applied to determine the priority of alternatives by taking the pair-wise comparison among factors.

• Journal of Astronomy and Space Sciences
• /
• v.11 no.1
• /
• pp.81-92
• /
• 1994

The magnetic field measurements from the KitSat-1 and KitSat-2 were tested by comparing with the IGRF model. The magnetic data have been collected by a three-axis fluxgate magnetometer on each satellite at an latitude of 1,325 km and 820 km, respectively. To avoid highly variable magnetic disturbances at the polar region, the field map has been within the limits of 50 degrees in latitude. Each data is averaged over the square of $5{\times}5$ degrees in both latitude and longitude. In these results, the relatively quiet periods were selected and the sampling rate was 30 seconds. It is shown that the results from these measurements are consistent with the IGRF map over the global surface map.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.8
• /
• pp.1-10
• /
• 1993

In this paper, we will propose 4-move ZKIP and its application. Using bit-commitment scheme that is necessary to organize the ZKIP related to NP-Complete problem and WH and WI preserving the property for security under parallel composition of protocols, we will show that the proposed ZKIP is 4-move ZKIP of SAT comparing to 6-move ZKIP of SAT proposed by Brassard. Chaum and Yung, and under claw-free pairs of function the proposed ZKIP is also 4-move ZKIP comparing to 5-move ZKIP proposed by Goldreich and Krawczyk under the same assumption. Moreover we will show the efficiency of the proposed scheme better than Fiat and Shamir's scheme at the points of computational complexity and communication complexity, and also propose the efficient and secure identification scheme against the chosen ciphertext attack, using the proposed scheme.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1065-1068
• /
• 2003

For the first time, high quality ultra-thin strained Si/SiGe on Insulator (SGOI) substrate with total SGOI thickness( $T_{Si}$ + $T_{SiGe}$) of 13 nm is developed to combine the device benefits of strained silicon and SOI. In the case of 6- 10 nm-thick top silicon, 100-110 % $I_{d,sat}$ and electron mobility increase are shown in long channel nFET devices. However, 20-30% reduction of $I_{d,sat}$ and electron mobility are observed with 3 nm top silicon for the same long channel device. These results clearly show that the FETs operates with higher performance due to the strain enhancement from the insertion of SiGe layer between the top silicon layer and the buried oxide(BOX) layer. The performance degradation of the extremely thin( 3 nm ) top Si device can be attributed to the scattering of the majority carriers at the interfaces.

• Journal of the Korean Society for Heat Treatment
• /
• v.3 no.1
• /
• pp.17-24
• /
• 1990

In this study, TiN film was deposited onto steel by R.F.-PACVD in order to investigate the influence of parameters on the adhesion strength between film and substrate. Experimental results showed that adhesion strength by SAT is different from by optical microscopy. Adhesion strength is increased when the deposition temperature increases and is influenced by R.F. power and electrode distance. Especially heat treatment on the substrate has influenced over the adhesion strength, so it showed the 22 Newtons in adhesion strength by SAT and adhesion strength is decreased when deposition thickeness is thick and hardness is high. Also if the film is thick and high hardness simultaneous, the film was delaminated seriously.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.1
• /
• pp.84-88
• /
• 2000

In this paper, a low voltage CMOS analog four-quadrant multiplier is presented. The proposed multiplier is composed of two fully differential transconductors and lowers supply voltage down to VT+2VDS,sat+VDS,triode. The designed analog four-quadrant multiplier has simulated by HSPICE using 0.25㎛ n-well CMOS process with a 1.2V supply voltage. Simulation results show that the THD can be 1.28% at maximum differential input of 0.7VP-P.

• Journal of Astronomy and Space Sciences
• /
• v.9 no.2
• /
• pp.203-212
• /
• 1992

Geomagnetic data from 3-axis magnetometer and the IGRF model (tilite - eccentric dipole model) were used to determine the attitude of a satellite. We compared the values of the geomagnetic model with the magnetometer data and two attitude angles, called $\alpha$ -angle and $\beta$-angle respectively, were calculated. From these angles we calculated simple bounds, $\gamma1$ and $\gamma2$, on the true attitude angle $\gamma$, which is used to detemine attitude, between the z-axis and the local vertical. And then we investigated conditions of attitudes of UoSAT-11, 14, 22.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.11 no.1
• /
• pp.27-40
• /
• 2003

For the flight education, it needs a lot of money. Most of people become airline transportation pilots after completing a course. Therefore it is important to select superior students who adapt themselves to flight for flying education. At present, students who have a good high school record and SAT(Scholastic Aptitude Test) are chosen, and educated at Hankuk aviation university, department of aeronautical science and flight operation. This research studies the professor's recognition of the relationship between practical flight skills and high school record, university grades, and SAT grades.. On this analysis result, there are significant differences between belonging education, completion and work experience.

• Journal of Aerospace System Engineering
• /
• v.8 no.1
• /
• pp.36-41
• /
• 2014

KAFASAT is a CubeSat which has a high level mission of testing the possibility of establishing the LEO satellite constellation providing the role of communication nodes and quasi-realtime image recognition of battlefield in accordance with the aspect of future-war-environment. The high level mission is developed using the Pugh selection method, which is one of system engineering tools. In order to accomplish the high level mission objectives and deduce engineering level requirements, system engineering tools such as Analytic Hierarchy Process and Quality Function Deployment are used. The subsystem synthesis in the context of system engineering process is done using a developed integrated design environment. The paper also includes the conceptual design results of the KAFASAT, which can be used as a baseline for upcoming preliminary design.