• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.1
• /
• pp.9-15
• /
• 2013

This study is to evaluate the parameter behavior of VfloTM distributed rainfall-runoff model by applying 3 kinds of rainfall interpolation methods viz. Inverse Distance Weighting (IDW), Kriging (KRI), and Thiessen network (THI). For the 1,544 $km^2$ Dongcheon watershed of Nakdong river, the model was calibrated using 4 storm events in 2007 and 2009, and validated using 2 storm events in 2010. The model was calibrated with Nash-Sutcliffe model efficiency of 0.97 for IDW, 0.94 for KRI, and 0.95 for THI respectively. For the sensitive parameters, the saturated hydraulic conductivity ($K_{sat}$) for IDW, KRI, and THI were 0.33, 0.31, and 0.43 cm/hr, and the soil suction head at the wetting front (${\Psi}_f$) were 4.10, 3.96, and 5.19 cm $H_2O$ respectively. These parameters affected the infiltration process by the spatial distribution of antecedent moisture condition before a storm.

• Journal of Astronomy and Space Sciences
• /
• v.11 no.2
• /
• pp.320-326
• /
• 1994

The KITSAT-1 (Auguse, 1992) and the KITSAT-2(September, 1993) were successfully launched and operated by the SatRec(Satellite Research Center). Both carry the CCD cameras to monitor the image of the earth. We used the camera bench type automatic equipment in the KSRI(Korea Standards Research Institute) to measure the MTF(Modulation Transfer Function) value of the lens attached to the CCD camera. We measured the tangential MTF and the sagital MTF by varing the f-number and the field angle. According to the result, the light from a point source is focused within one pixel of the CCD chip when the f-number is smaller than 4.0, and the MTF value becomes smaller as the field angle increases.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.2
• /
• pp.125-131
• /
• 2002

This paper presents MMIC drive and power amplifiers covering 6-18 ㎓. For simple wideband impedance matching and less sensitivity to fabrication variation, modified distributed topologies are employed in the both amplifiers. Cascade amplifiers with a self-biasing circuit through feedback resistors are used as unit gain blocks in the drive amplifier, resulting in high gain, high stability, and compact chip size. Self impedance matching and high-pass, low-pass impedance matching networks are used in the power amplifier. In measured results, the drive amplifier showed good return losses ($S_11,{\;}S_{22}{\;}<{\;}-10.5{\;}dB$), gain flatness ($S_{21}={\;}16{\;}{\pm}0.6{\;}dB$), and $P_{1dB}{\;}>{\;}22{\;}dBm$ over 6-18 GHz. The power amplifier showed $P_{1dB}{\;}>{\;}28.8{\;}dBm$ and $P_{sat}{\;}{\approx}{\;}30.0{\;}dBm$ with good small signal characteristics ($S_{11}<-10{\;}dB,{\;}S_{22}{\;}<{\;}-6{\;}dB,{\;}and{\;}S_{21}={\;}18.5{\;}{\pm}{\;}1.25{\;}dB$) over 6-18 GHz.

• Journal of Broadcast Engineering
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1996

Digital DBS service using Korea Sat starts at Korea Telecom's Yong-in transmission site. Total 6 transmitting stations are needed. At each transmitting station, 4 TV programs are compressed and multiplexed using MPEG-2, modulated into IF, RF signals, then finally transmitted through antenna. At DBS transponder, received signal is down converted, amplified and re-transmitted to earth. At receiver, signal is received by 45cm dish antenna, then wanted program is selected, demultiplexed and decoded. Transmission performance of BER lOE-ll is implemented by using FEe coding and QPSK modulation. For pay TV management, conditional access system, smart card and modem are used.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.1
• /
• pp.1-11
• /
• 2008

The purpose of this study was to investigate the effects of Internet shopping interests on the casual relationships among Internet shopping mall attributes, emotions, and impulse buying behavior. Data were obtained from 414 internet shoppers who had bought fashion products in internet shopping mall. The result showed that the highly interested Internet shoppers, when perceived the product attributes of Internet shopping mall, were more likely to feel positive emotions, and then were more likely to buy fashion products impulsively in Internet shopping. The less perceived the convenience of checkout & trust in Internet, the more negative emotions they had. However, the less interested Internet shoppers were more likely to buy impulsively fashion products with positive emotions when they perceived various product assortments, and were negatively influenced by the high speed of loading and promotions of Internet shopping mall. The findings provide implications of impulse buying behavior in Internet shopping malls for fashion products.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.439-439
• /
• 2018

충주호는 충청권의 생 공 농업용수로 이용되는 광역상수원이며, 2016년 기준 연간 약 3만6천톤이 방류되어 남한강 전체 수질에 큰 영향을 미친다. 현재 충주호는 상류 유역의 오염원이 적게 분포하여 1급수의 수질기준을 만족하고 있으나, 상류 유역의 개발로 오염원 유입이 증가할 경우 호소 내 수질 및 남한강 전체 수질에 악영향을 미칠 수 있다. 따라서 충주댐 상류 유역의 오염부 하량 변화에 따른 수질변화를 예측하고, 현재수질 유지를 위한 허용 오염부하량을 산정할 필요가 있다. 한편, EFDC-WASP 연계모델은 수리학적 계산을 보다 정확하게 할 수 있는 동시에 이를 수질모델에 사용할 수 있어 다수의 연구자들에 의해 호소의 수질 모델링이 이루어졌으며 적용성이 많이 검증되었다. 본 연구에서는 EFDC-WASP 연계 모형을 이용하여 충주댐 상류유역의 배출부하 변화에 따른 호내 수질특성 변화를 분석하고자 한다. 모의구간은 충주댐의 유입지점부터 방류지점까지로, 수치해석을 위한 격자망은 총 800여개의 격자로 구성하였다. 수위자료는 한강홍수통제소에서 제공하는 충주댐 수위자료를 사용하였으며, 수질자료는 환경부 호소 측정지점인 충주호1,2,3 의 자료와 하천 측정지점인 제천A과 한강B의 자료를 사용하였다. 모의기간은 2013-2015년으로 2013년은 모델의 안정기로, 2014년은 보정, 2015년은 검정에 각각 활용하였다. 보검정된 모델을 활용하여 유입부하량 변화에 따른 수질변화를 모의하였고, 1급수 수질을 만족하는 허용부하량을 도출하였다. 본 연구의 방법은 향후 호소 상류유역의 개발에 따른 수질변화 예측과 허용부하량 산정에 활용할 수 있을 것으로 기대된다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.5
• /
• pp.366-370
• /
• 2019

In this paper, a single N+ emitter trench gate-type insulated gate bipolar transistor (IGBT) device was studied using T-CAD, in order to achieve a low on-state voltage drop (Vce-sat) and high breakdown voltage, which would reduce power loss and device reliability. Using the simulation, the threshold voltage, breakdown voltage, and on-state voltage drop were studied as a function of the temperature, the length of time in the diffusion process (drive-in) after implant, and the trench gate depth. During the drive-in process, a $20^{\circ}C$ change in temperature from 1,000 to $1,160^{\circ}C$ over a 150 minute time frame resulted in a 1 to 4 V change in the threshold voltage and a 24 to 2.6 V change in the on-state voltage drop. As a result, a 0.5 um change in the trench depth of 3.5 to 7.5 um resulted in the breakdown voltage decreasing from 802 to 692 V.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.10 no.3
• /
• pp.220-227
• /
• 1981

The purpose of this paper is to investigate the potential ability of sintered metal tube to promote heat transfer. In the experiment for Freon - 11, the boiling heat transfer on the sintered metal tube of bronze element is investigated and compared with that of the bronze tube (bare tube) atmospheric pressure. The experimental results are obtained as follows : 1) For sintered metal tubes of bronze element with particle diameters which ranges from $79({\mu})\;to\;461({\mu})$ and bare tube, boiling characteristic curves are expressed as : a) Sintered metal tube $$q{\propto}{\Delta}T^{1.05\~1.373}$$ b) Brae tube $$q{\propto}{\Delta}T^{3.096}$$ 2) Compared with that of the bare tube at low temperature difference$({\Delta}T_{sat})$, boiling heat transfer coefficient of the sintered bronze tube are relatively high. 3) There is tendency that curves of boiling heat transfer coefficients of sintered ·bronze tube and bare tube approach each other at rather high temperature difference. It is due to the increasing rate of the former heat transfer coefficient along with temperature difference is smaller than that of the latter. 4) Referring to particle diameter, optimum condition, i. e. , maximum heat transfer coefficient is found to be at approximately 2 mm thickness of sintered layer with $D_p=150({\mu})$.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.1
• /
• pp.83-90
• /
• 1986

A micro pH-ISFET probe, which can be applied to the in vivo measurements of the hydrogen ion concentration in blood, has been developed, and a measuring system equiped with this probe also developed. The pH-ISFET has been fatricated by employing the techniques of integrated circuit fabrication. Two kinds of micro electrode formed around the sensing gate during the wafer process, and the other is a capillary type of Ag/AfCl/sat. KCI reduced in size. This capillary electrode has shown its good performance characteristics so far in the application with ISFET as well as a commercial one. In order to form a micro pH-ISFET probe, this pH-ISFET and well as a commercial one. In order to form a micro pH-ISFET probe, this pH-ISFET and the capillary electrode were built together into a needle tip having 1 mm inner diameter. The chip size of a twin pH-ISFET is 0.8 mmx1.4 mm, the material of the sensing gate membrane is Si3N4, and the sensitivity of the developed probe is about 52mV/pH.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.4
• /
• pp.527-536
• /
• 1996

Convective nucleate boiling and burnout heat flux have been studied on a flat, downward facing, constant heat flux surface cooled by an impinging water jet. The tests are progressed from low, nonboiling power to high, burnout heat flux power. The jet velocity and the subcooling do not affect the nucleate boiling curve of $q{\sim}{\Delta}T_{sat}$ diagram, but the supplementary water height affects the curve. For the case of dimensionless height of supplementary water S/D=1, the boiling curve shift to the heigher heat flux than that of S/D=0 or S/D=2. Burnout heat flux is enhanced with increasing jet velocity and subcooling. Also. by using the supplementary water(S/D=1 or S/D=2), burnout heat flux is larger than that of the simple water jet(S/D=0). A generalized correlation for the burnout heat flux data in the present boiling system with an impinging water jet is successfully evolved.