• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.10
• /
• pp.1957-1964
• /
• 1994

In this thesis, a Synthetic Aperture Rarar Processor that is possible real-time handling is implemented using CW(Continuose Wave) laser as a light source, CCD(charge Coupled Device) as a time integrator, and AOD(Acousto-Optic Device) as the space integrator. One of the advantages of the proposed system is that it does not require driving circuits of the light source. To implement the system, the linear frequency modulation(chirp) technique has been used for radar signal. The received data for the unit target was processed using 7.80 board and accompanying electronic circuits. In order to reduce the smear effect of the focused chirp signal which occurs Bragg diffrection angle of the AOD has been utilized to make sharp pulses of the laser source, and the pulse made synchronized with the chirp signal. Experiment and analysis results of the data and images detected from CCD of the proposed SAR system demonstrated that detection effect is degrated as the unit target distance increases, and the resolving power is improved as the bandwidth of the chirp signal increases. Also, as the pulse width of the light source decreases, the smear effect has been reduced. The experimental results assured that the proposed system in this papre can be used as a real time SAR processor.

• The Journal of Engineering Geology
• /
• v.32 no.2
• /
• pp.271-280
• /
• 2022

Landfast sea ice forms near coastlines in polar regions. Continuous monitoring of this sea ice is important, as it plays a key role in the marine ecosystem and affects the operation of nearby research stations. This study detected landfast sea ice around Jang Bogo research station in East Antarctica by stacking interferometric coherence images of Sentinel-1 synthetic aperture radar (SAR) data with 6-, 12- and 18-day temporal baselines. A total of 50 landfast sea ice maps were generated covering July 2017 to June 2018. The time series revealed regional differences in the timing of the maximum extent as well as growth rate of landfast sea ice. Overall, detecting landfast sea ice using interferometric SAR coherence seems promisingly feasible; however, limitations remain owing to low backscattering coefficients from new and smooth sea ice surfaces and subtle movements of sea ice in contact with the Campbell Glacier Tongue.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1381-1388
• /
• 2014

This paper is proposed a wavelet-based the order statistics MAD(Median Absolute Deviation) method of SAR(Synthetic Aperture Radar) image for image enhancement. also The method of compared and defined the threshold the wavelet coefficients using MAD of the wavelet coefficients of the detail subbands was proposed to effectively image enhancement. In order to complement the disadvantage, the threshold of the proposed method sets up the image statistic and excludes the distortion. The hardware design is used FPGA of Xilinx and DSP system for the image enhancement and compressed encoding of the proposed algorithm. Therefore the proposed method is totally verified by comparing with the several other images.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.2
• /
• pp.187-196
• /
• 2017

The size of raw data has dramatically increased due to the recent trend of Synthetic Aperture Radar(SAR) development plans for high resolution and high definition image acquisition. The large raw data has an impact on satellite operability due to the limitations of storage and transmission capacity. To improve the SAR operability, the SAR raw data shall be compressed before transmission to the ground station. The Block Adaptive Quantization (BAQ) algorithm is one of the data compression algorithm and has been used for a long time in the spaceborne SAR system. In this paper, an optimization method of BAQ threshold table is introduced using real SAR raw data to prevent the degradation of signal quality caused by data compression. In this manner, a new variation estimation strategy and a new threshold method for block type decision are introduced.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.5
• /
• pp.443-461
• /
• 2022

Target Detection in synthetic aperture radar(SAR) image is critical for military and national defense. In this paper, we propose YOLOv4-Attention architecture which adds attention modules to YOLOv4 backbone architecture to complement the feature extraction ability for SAR target detection with high accuracy. For training and testing our framework, we present new SAR embedding datasets based on MSTAR SAR public datasets which are about poor environments for target detection such as various clutter, crowded objects, various object size, close to buildings, and weakness of signal-to-clutter ratio. Experiments show that our Attention YOLOv4 architecture outperforms original YOLOv4 architecture in SAR image target detection tasks in poor environments for target detection.

• Journal of the Korean Geosynthetics Society
• /
• v.21 no.4
• /
• pp.55-67
• /
• 2022

In this paper, fundamentals and recent development of the interferometric synthetic aperture radar, known as InSAR, technique for measuring ground deformation through satellite image analysis are presented together with case histories illustrating its applicability to urban ground deformation monitoring. A study area in Korea was selected and processed based on the muti-temporal time series InSAR analysis, namely SBAS (Small Baseline Subset)-InSAR and PS (Persistent Scatterers)-InSAR using Sentinel-1A SAR images acquired from the year 2014 onward available from European Space Agency Copernicus Program. The ground settlement of the study area for the temporal window of 2014-2022 was evaluated from the viewpoint of the applicability of the InSAR technique for urban infrastructure settlement monitoring. The results indicated that the InSAR technique can reasonably monitor long-term settlement of the study area in millimetric scale, and that the time series InSAR technique can effectively measure ground settlement that occurs over a long period of time as the SAR satellite provides images of the Korean Peninsula at regular time intervals while orbiting the earth. It is expected that the InSAR technique based on higher resolution SAR images with small temporal baseline can be a viable alternative to the traditional ground borne monitoring method for ground deformation monitoring in the 4^th industrial era.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.4
• /
• pp.347-354
• /
• 2022

The synthetic aperture radar(SAR) is an equipment that can acquire images in all weathers day and night based on radar signals. The on-board processor of satellite SAR generates transmission signal by digital signal processing, converts it into an analog signal and transmits to antenna. Until the transmission signal generated by on-board processor is output, the signal passes the transmission cables and analog devices. At this time, these hardware distort the signal and makes SAR performance worse. To improve the performance, pre-distortion technique is used. But, general pre-distortion using taylor series is not sufficient to compensate for the distortion. This paper suggests transmit signal design method with improved pre-distortion. This paper uses envelop sampling method and interpolation filter for frequency domain compensation. The proposed method accurately compensates the hardware distortion and reduces resource usage of FPGA. To analyze proposed method's performance, IRF characteristics are compared when the proposed method applies to signal with errors.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.2
• /
• pp.141-151
• /
• 2019

In this study, we propose a performance analysis of a quadrature-polarimetric(quad-pol) synthetic aperture radar(SAR) system for wide-swath operation mode and compare it with a single-pol system based on the operation mode. To achieve a shorter revisit time for an SAR satellite, we must observe a wide area, and two SAR operation modes exist for this purpose, which are called ScanSAR and SweepSAR. In general, a quad-pol SAR system can obtain a greater variety of information about a target than a single-pol system. Because this system affects system performance parameters, analyzing these effects is required. Based on a performance analysis of the wide-swath quad-pol SAR system, the system parameters and appropriate operation mode can be selected to satisfy the performance requirements.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.4
• /
• pp.275-281
• /
• 2019

A synthetic aperture radar(SAR) satellite is more effective than an optical satellite for target analysis because an SAR satellite can provide two-dimensional electromagnetic scattering distribution of a target during all-weather and day-and-night operations. To conduct target analysis while considering the earth observation interval of an SAR satellite, observing a specific area as wide as possible would be advantageous. However, wider the observation area, worse is the resolution of the associated SAR satellite image. Although conventional methods for improving the resolution of radar images can be employed for addressing this issue, few studies have been conducted for improving the resolution of SAR satellite images and analyzing the performance. Hence, in this study, the applicability of conventional methods to SAR satellite images is investigated. SAR target detection was first applied to Korea Multipurpose Satellite-5(KOMPSAT-5) SAR images provided by Korea Aerospace Research Institute for extracting target responses. Extrapolation, RELAX, and MUSIC algorithms were subsequently applied to the target responses for improving the resolution, and the corresponding performance was thereby analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.8
• /
• pp.838-848
• /
• 2014

We present a simulation study of an algorithm for the range and angle of arrival(AOA) estimation with an interferometric synthetic aperture radar(InSAR) altimeter using a real digital elevation model(DEM). We also illustrate a step-by-step procedure of generating raw InSAR data, as well as their range and azimuth compressed data, which is to be used for the subsequent altitude and angle estimation. The AOA is estimated using a deterministic maximum likelihood estimator(DMLE) applied to the first arrived point for each pulse in the compressed data obtained with three antennas. The range bin size and the pulse repetition interval(PRI) are much smaller than the cell size of the DEM used in this study. To make the DEM compatible to the radar parameters, we first generate a higher resolution DEM by linearly interpolating the given DEM. After a brief description of the principle of the InSAR altimeter, the algorithms for altitude and angle estimation are presented, and their performance is assessed through simulation.